Broadband Forum

    DATA MODEL DEFINITION


TR-069 Device:2.3 Root Object definition
tr-181-2-3-0.xml (changes)

License

Copyright (c) 2010-2017, Broadband Forum

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The above license is used as a license under copyright only. Please reference the Forum IPR Policy for patent licensing terms <https://www.broadband-forum.org/ipr-policy>.

Any moral rights which are necessary to exercise under the above license grant are also deemed granted under this license.

Summary

Device:2.3 data model

Table of Contents

Data Types

The Parameters defined in this specification make use of a limited subset of the default SOAP data types [SOAP1.1]. These data types and the named data types used by this specification are described below.

Note: A Parameter that is defined to be one of the named data types is reported as such at the beginning of the Parameter's description via a reference back to the associated data type definition (e.g. [MacAddress]). However, such parameters still indicate their SOAP data type.

Data Type Base Type Description
Alias string(64)

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
base64 -

Base64 encoded binary (no line-length limitation).

A minimum and maximum allowed length can be indicated using the form base64(Min:Max), where Min and Max are the minimum and maximum length in characters before Base64 encoding. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in base64(Max). Multiple comma-separated ranges can be specified, in which case the length MUST be in one of the ranges.

boolean - Boolean, where the allowed values are 0 or 1 (or equivalently, true or false).
dateTime - The subset of the ISO 8601 date-time format defined by the SOAP dateTime type.
hexBinary -

Hex encoded binary.

A minimum and maximum allowed length can be indicated using the form hexBinary(Min:Max), where Min and Max are the minimum and maximum length in characters before Hex Binary encoding. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in hexBinary(Max). Multiple comma-separated ranges can be specified, in which case the length MUST be in one of the ranges.

int -

Integer in the range -2147483648 to +2147483647, inclusive.

For some int types, a value range is given using the form int[Min:Max] or int[Min:Max step Step] where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

long -

Long integer in the range -9223372036854775808 to 9223372036854775807, inclusive.

For some long types, a value range is given using the form long[Min:Max] or long[Min:Max step Step], where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

object - A container for parameters and/or other objects. The full Path Name of a parameter is given by the parameter name appended to the full Path Name of the object it is contained within.
string - For strings, a minimum and maximum allowed length can be indicated using the form string(Min:Max), where Min and Max are the minimum and maximum string length in characters. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in string(Max). Multiple comma-separated ranges can be specified, in which case the string length will be in one of the ranges.
unsignedInt -

Unsigned integer in the range 0 to 4294967295, inclusive.

For some unsignedInt types, a value range is given using the form unsignedInt[Min:Max] or unsigned[Min:Max step Step], where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

unsignedLong -

Unsigned long integer in the range 0 to 18446744073709551615, inclusive.

For some unsignedLong types, a value range is given using the form unsignedLong[Min:Max] or unsignedLong[Min:Max step Step], where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

References

[SOAP1.1] Simple Object Access Protocol (SOAP) 1.1, W3C.
[TR-069a4] TR-069 Amendment 4, CPE WAN Management Protocol, Broadband Forum, 2011.

Device:2.3 Data Model (changes)

For a given implementation of this data model, the Agent MUST indicate support for the highest version number of any object or parameter that it supports. For example, even if the Agent supports only a single parameter that was introduced in version 2.3, then it will indicate support for version 2.3. The version number associated with each object and parameter is shown in the Version column.

Name Type Write Description Object Default Version
Device. object - The top-level object for a Device. - 2.0
Device.DeviceInfo. object - This object contains general device information. - 2.0
Device.DeviceInfo.SupportedDataModel.{i}. object -

This table contains details of the device's Current Supported Data Model.

The table MUST describe the device's entire Supported Data Model. Therefore, if a device's Supported Data Model changes at run-time, entries will need to be added or removed as appropriate.

Each table entry MUST refer to only a single Root Object or Service Object. The device MAY choose to use more than one table entry for a given Root Object or Service Object.

Considering that every device has some form of a data model, this table MUST NOT be empty.

At most one entry in this table can exist with a given value for URL, or with a given value for Alias.

- 2.0
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.3
Device.DeviceInfo.TemperatureStatus. object - Status of the temperature of the device. - 2.0
Device.DeviceInfo.TemperatureStatus.TemperatureSensor.{i}. object -

This object represents information that the device has obtained via sampling an internal temperature sensor.

At most one entry in this table can exist with a given value for Name, or with a given value for Alias.

- 2.0
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.3
Device.DeviceInfo.Processor.{i}. object -

Each table entry represents a hardware or virtual processor that resides on this device.

At most one entry in this table can exist with a given value for Alias.

- 2.1
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.3
Device.DeviceInfo.ProxierInfo. object - Represents the associated CPE Proxier for a Proxied Device that utilizes the Virtual CWMP Device Mechanism [Annex J.1.1/TR-069a4]. - 2.3
ManufacturerOUI string­(6:6) -

Organizationally unique identifier of the associated CPE Proxier. Represented as a six hexadecimal-digit value using all upper-case letters and including any leading zeros. Possible patterns:

The value MUST be a valid OUI as defined in [OUI].

- 2.3
ProductClass string­(64) -

Identifier of the class of product of the associated CPE Proxier for which the serial number applies.

An empty string indicates either that the CPE Proxier does not use a product class to differentiate its serial number.

- 2.3
SerialNumber string­(64) - Serial number of the associated CPE Proxier. - 2.3
ProxyProtocol string­(64) -

The protocol being used to communicate between the CPE Proxier and this Proxied Device. Enumeration of:

Vendors can extend the enumerated values with vendor specific extensions, in which case the rules outlined in [Section 3.3/TR-106a6] MUST be adhered to.

- 2.3
Device.ManagementServer. object - This object contains parameters relating to the CPE's association with an ACS. - 2.0
AliasBasedAddressing boolean -

Indicates whether or not the Alias-Based Addressing Mechanism is supported.

A true value indicates that the CPE supports the Alias-Based Addressing Mechanism, as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4].

- 2.3
InstanceMode string W

Instance identification mode as defined in [Section 3.6.1/TR-069a4]. When AliasBasedAddressing is true, InstanceMode is used by the ACS to control whether the CPE will use Instance Numbers or Instance Aliases in returned Path Names. Enumeration of:

This parameter is REQUIRED for any CPE supporting Alias-Based Addressing.

The factory default value MUST be InstanceNumber.

- 2.3
AutoCreateInstances boolean W

Enable or disable the Auto-Create Instance Mechanism. When AliasBasedAddressing is true, AutoCreateInstances indicates whether or not the CPE will automatically create instances while processing a SetParameterValues RPC (as defined in [A.3.2.1/TR-069a4]).

  • A true value indicates that the CPE will perform auto-creation of instances when the Alias-Based Addressing Mechanism is used in SetParameterValues RPC.
  • A false value indicates that the CPE will not create new object instances. Instead, it will reject the setting of parameters in unrecognized instances and respond with a fault code.

This parameter is REQUIRED for any CPE supporting Alias-Based Addressing.

The factory default value MUST be false.

- 2.3
EmbeddedDeviceNumberOfEntries unsignedInt - The number of entries in the EmbeddedDevice table. - 2.3
VirtualDeviceNumberOfEntries unsignedInt - The number of entries in the VirtualDevice table. - 2.3
Device.ManagementServer.DownloadAvailability. object - This object contains multicast announcement and query parameters used for the purpose of downloading files. - 2.0
Device.ManagementServer.DownloadAvailability.Announcement. object - This object contains multicast announcement parameters used to download files. - 2.0
Device.ManagementServer.DownloadAvailability.Announcement.Group.{i}. object W

Multicast groups to which the CPE SHOULD listen for announcements.

At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries.

At most one enabled entry in this table can exist with a given value for URL.

- 2.0
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.3
Device.ManagementServer.EmbeddedDevice.{i}. object -

Each entry in this table represents a distinct Proxied Device that utilizes the Embedded Object Mechanism [Annex J.1.2/TR-069a4] for proxying devices.

At most one entry in this table can exist with the same values for ControllerID and ProxiedDeviceID.

- 2.3
ControllerID string­(256) -

Identifier of the controller that is responsible for a sub-network of Proxied Devices within the LAN.

An empty string indicates that this Proxied Device either:

  • Isn't part of a sub-network, within the LAN, with a controller entity.
  • Doesn't need a ControllerID to ensure its ProxiedDeviceID is unique throughout the LAN.
- 2.3
ProxiedDeviceID string­(256) -

Idenitfier of the Proxied Device.

This is an opaque string that is unique to the Proxied Device within a specific sub-network within the LAN (identified by the ControllerID). If the ControllerID is an empty string this ProxiedDeviceID is unique across the LAN.

- 2.3
Reference string - The value MUST be the path name of a table row. If the referenced object is deleted, this EmbeddedDevice instance MUST also be removed. Represents the instance of a multi-instanced object that is directly controlled by, and has come into existence because of, this Proxied Device that utilizes the Embedded Object Mechanism [Annex J.1.2/TR-069a4]. - 2.3
SupportedDataModel string - Comma-separated list of strings. Each list item MUST be the Path Name of a row in the DeviceInfo.SupportedDataModel table. If the referenced object is deleted, the corresponding item MUST be removed from the list. Represents the CWMP-DT schema instance(s) that this Proxied Device is utilizing. The CWMP-DT schema instance is also the one being utilized by the object referenced within Reference. - 2.3
Host string - Comma-separated list (up to 32 items) of strings. Each list item MUST be the Path Name of a row in the Hosts.Host table. If the referenced object is deleted, the corresponding item MUST be removed from the list. References the Hosts.Host table entry(s), whether active or inactive, that corresponds to this proxied LAN device. - 2.3
ProxyProtocol string­(64) -

The protocol being used to communicate between the CPE Proxier and this Proxied Device. Enumeration of:

Vendors can extend the enumerated values with vendor specific extensions, in which case the rules outlined in [Section 3.3/TR-106a6] MUST be adhered to.

- 2.3
CommandProcessed string -

Whether or not the CPE Proxier has successfully communicated all pending configuration commands down to the Proxied Device. Enumeration of:

- 2.3
CommandProcessingErrMsg string­(1024) - Detailed CommandProcessed error description (vendor specific). - 2.3
LastSyncTime dateTime -

The last time that the CPE Proxier synchronized the state of the Proxied Device. This parameter MUST be updated when a proxy command is executed successfully on the Proxied Device.

The Unknown Time value, as defined in [TR-106a6], indicates that the Proxied Device's state has not been synchronized since the CPE Proxier was last rebooted.

- 2.3
Device.ManagementServer.VirtualDevice.{i}. object -

Each entry in this table represents a distinct Proxied Device that utilizes the Virtual CWMP Device Mechanism [Annex I.1.1/TR-069a4] for proxying devices.

At most one entry in this table can exist with all the same values for ManufacturerOUI, ProductClass and SerialNumber.

- 2.3
ManufacturerOUI string­(6:6) -

Organizationally unique identifier of the associated Proxied Device. Represented as a six hexadecimal-digit value using all upper-case letters and including any leading zeros. Possible patterns:

The value MUST be a valid OUI as defined in [OUI].

- 2.3
ProductClass string­(64) - Identifier of the class of product of the associated Proxied Device for which the serial number applies. - 2.3
SerialNumber string­(64) - Serial number of the associated Proxied Device. - 2.3
Host string - Comma-separated list (up to 32 items) of strings. Each list item MUST be the Path Name of a row in the Hosts.Host table. If the referenced object is deleted, the corresponding item MUST be removed from the list. References all the Hosts.Host table entries, whether active or inactive, that correspond to this proxied LAN device. There can be multiple such entries if the Proxied Device has more than one network interface. - 2.3
ProxyProtocol string­(64) -

The protocol being used to communicate between the CPE Proxier and this Proxied Device. Enumeration of:

Vendors can extend the enumerated values with vendor specific extensions, in which case the rules outlined in [Section 3.3/TR-106a6] MUST be adhered to.

- 2.3
Device.InterfaceStack.{i}. object -

This table contains information about the relationships between the multiple layers of interface objects ([Section 4.3/TR-181i2]). In particular, it contains information on which interfaces run on top of which other interfaces.

This table is auto-generated by the CPE based on the LowerLayers parameters on individual interface objects.

Each table row represents a "link" between two interface objects, a higher-layer interface object (referenced by HigherLayer) and a lower-layer interface object (referenced by LowerLayer). Consequently, if a referenced interface object is deleted, the CPE MUST delete the corresponding InterfaceStack row(s) that had referenced it.

At most one entry in this table can exist with the same values for HigherLayer and LowerLayer, or with a given value for Alias.

- 2.0
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.3
Device.USB. object - Universal Serial Bus ([USB1.0], [USB2.0], [USB3.0]). This object contains the Interface, Port, and USBHosts objects. - 2.0
Device.USB.USBHosts. object -

This object models the CPE's USB Host controllers.

See [Appendix I/TR-157] for Theory of Operation.

- 2.0
Device.USB.USBHosts.Host.{i}. object -

Table of CPE USB Host controllers.

At most one entry in this table can exist with a given value for Name, or with a given value for Alias.

- 2.0
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.3
Device.Users. object - Users object that contains the User table. - 2.0
Device.Users.User.{i}. object W

This object contains parameters relating to the user characteristics.

At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries.

At most one enabled entry in this table can exist with a given value for Username.

- 2.0
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.3
Device.SmartCardReaders. object - SmartCardReaders object that contains the SmartCardReader table. - 2.0
Device.SmartCardReaders.SmartCardReader.{i}. object -

This object describes the characteristics of the smart card reader.

At most one entry in this table can exist with a given value for Name, or with a given value for Alias.

- 2.0
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.3
Device.PeriodicStatistics. object -

This object configures collection of periodic statistics for the device.

Periodic statistics are measured over a sample interval (which can be aligned with absolute time) and are made available to the ACS as a comma-separated list of the most recent <n> samples.

This object provides a single set of global settings that affect the entire device unless overridden locally.

- 2.0
Device.PeriodicStatistics.SampleSet.{i}. object W

Periodic statistics sample set table. Each sample set has its own sample interval etc.

At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries.

At most one enabled entry in this table can exist with a given value for Name.

- 2.0
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.3
Device.PeriodicStatistics.SampleSet.{i}.Parameter.{i}. object W

Periodic statistics parameter table for this sample set. This table contains entries for parameters whose values are to be sampled.

Note that the comma-separated lists in this object (SampleSeconds, SuspectData and Values) only ever change (a) when first enabled, (b) when ForceSample is set to true (a "sneak preview" of the current sample), or (c) at the end of the sample interval.

At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries.

At most one enabled entry in this table can exist with a given value for Reference.

- 2.0
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.3

Inform and Notification Requirements

Forced Inform Parameters

Parameter
Device.ManagementServer.AliasBasedAddressing

Forced Active Notification Parameters

Parameter

Default Active Notification Parameters

Parameter

Parameters for which Active Notification MAY be Denied

Parameter
Device.DeviceInfo.SupportedDataModel.{i}.
Alias
Device.DeviceInfo.TemperatureStatus.TemperatureSensor.{i}.
Alias
Device.DeviceInfo.Processor.{i}.
Alias
Device.ManagementServer.DownloadAvailability.Announcement.Group.{i}.
Alias
Device.InterfaceStack.{i}.
Alias
Device.USB.USBHosts.Host.{i}.
Alias
Device.Users.User.{i}.
Alias
Device.SmartCardReaders.SmartCardReader.{i}.
Alias
Device.PeriodicStatistics.SampleSet.{i}.
Alias
Device.PeriodicStatistics.SampleSet.{i}.Parameter.{i}.
Alias

Profile Definitions

Notation

The following abbreviations are used to specify profile requirements:

Abbreviation Description
R Read support is REQUIRED.
W Both Read and Write support is REQUIRED. This MUST NOT be specified for a parameter that is defined as read-only.
P The object is REQUIRED to be present.
C Creation and deletion of instances of the object is REQUIRED.
A Creation of instances of the object is REQUIRED, but deletion is not REQUIRED.
D Deletion of instances of the object is REQUIRED, but creation is not REQUIRED.


Generated by Broadband Forum report.pl#422 (2018/03/28 version) on 2018/04/02 at 12:22:45.
report.pl --exitcode=fatals --cwmpindex=.. --nofontstyles --nowarnreport --quiet --lastonly --report=html --outfile=tr-181-2-3-0-diffs.html tr-181-2-3-0.xml