Represents the hardware configuration of the device, including details about the CPU, memory, and other hardware components. This object contains the configuration and status of physical buttons present on the device. {{numentries}} This object represents an individual physical button of the device. The button is typically discovered automatically from the system (e.g., via DeviceTree). Name of the button. The system-defined label for the button, often referencing its DeviceTree label. The current operational status of the button. Indicates the state when the button is being held down. Indicates the default state when the button is not being pressed. Indicates that a necessary configuration value is undefined or invalid. The location of the button as the user looks at the front of the device in its typical orientation. Specifies the full path of the input device for the button. (Eg: ''file:///dev/input/event0'') Which MUST use the uri scheme file {{bibref|RFC8089|The file URI Scheme}}. {{numentries}} This object defines the conditions for interpreting physical button presses into specific button events, such as a short press, long press, or release. Enables or disables this {{object}} entry. The name of the TriggerCondition. The type of trigger condition, which determines when this {{object}} is activated. Indicates that this {{object}} will be activated when the button is pressed. Indicates that this {{object}} will be activated when the button is released if it was pressed for a duration between {{param|Min}} and {{param|Max}}. Indicates that this {{object}} will be activated when the button is pressed for a duration longer than {{param|Timeout}}. {{param}} and {{param|Max}} have to be set together. Both values MUST be expressed in {{units}}. If the button gets released between {{param}} and {{param|Max}}, this {{object}} is activated. This parameter will only be used when {{param|Type}} is set to {{enum|Released|Type}}. {{param|Min}} and {{param}} have to be set together. Both values MUST be expressed in {{units}}. If the button gets released between {{param|Min}} and {{param}}, this {{object}} is activated. This parameter will only be used when {{param|Type}} is set to {{enum|Released|Type}}. This value MUST be expressed in {{units}}. If the button gets pressed for longer than {{param}}, this {{object}} is activated. This parameter will only be used when {{param|Type}} is set to {{enum|LongPressed|Type}} This {{param}} indicates the activation status of the condition. It is set to {{true}} when this {{object}} is activated and will automatically reset to {{false}} after a duration defined by the {{param|ActiveTime}} parameter. This {{param}} specifies the duration for which the {{param|Active}} parameter will remain {{true}} after this {{object}} is activated, expressed in {{units}}. Simulate a button push event for this button. This has only effect when the {{param|Status}} is {{enum|Released|Status}} or {{enum|Error_Misconfigured|Status}}. Duration of the button press event, expressed in {{units}}. If this parameter is absent or set to '0', the button will be pressed indefinitely and will remain {{enum|Pressed|#.Status}} until the {{command|#.Release()}} is executed. If this parameter is present and set to a value greater than '0', the button will auto-switch to the {{enum|Released|#.Status}} state after the specified duration. Simulate a button release event for this button. This has only effect when the {{param|Status}} is {{enum|Pressed|Status}} or {{enum|Error_Misconfigured|Status}}. Duration of the button release event, expressed in {{units}}. If this parameter is absent or set to '0', the button will be released indefinitely and will remain {{enum|Released|#.Status}} until the {{command|#.Push()}} is executed. If this parameter is present and set to a value greater than '0', the button will auto-switch to the {{enum|Pressed|#.Status}} state after the specified duration. Custom event based on the button event that occurred. This event also contains the name and type of the {{object|##.TriggerCondition.{i}}}, the name of the {{object|###.Button.{i}}}, and the {{param|Interval}} time. Value of the {{param|##.TriggerCondition.{i}.Name}} Value of the {{param|###.Button.{i}.Name}} Value of the {{param|##.TriggerCondition.{i}.Type}} Interval time from the time the button is pressed until this {{object}} is activated, expressed in {{units}}. Represents the system's CPU configuration, providing details about each individual processor core, its capabilities, and its current operating state. {{numentries}} Represents a single CPU instance with configurable parameters related to its operational settings. Represents the CPU's Dynamic Voltage and Frequency Scaling (DVFS) configuration. DVFS allows the operating voltage and frequency of the CPU to be dynamically adjusted to optimize power consumption and performance based on workload demands. Enables or disables Dynamic Voltage and Frequency Scaling (DVFS) for this CPU. This parameter is only applicable if {{param|Supported}} is {{true}}. If {{param|Supported}} is {{false}} and this parameter is {{true}} the {{param|Status}} will be set to {{enum|Unsupported|Status}}. When this parameter is set to {{false}}, the {{param|Status}} will be set to {{enum|Disabled|Status}}. Indicates the status of Dynamic Voltage and Frequency Scaling (DVFS) for this CPU. Indicates that DVFS is disabled. Indicates that DVFS is enabled and supported by the CPU. Indicates that this CPU does not support DVFS, in which case {{param|Supported}} will be {{false}}. Indicates whether this CPU supports DVFS. The current operating frequency of the CPU in {{units}}. The minimum frequency that the CPU hardware is capable of operating at, in {{units}}. The maximum frequency that the CPU hardware is capable of operating at, in {{units}}. The minimum operating frequency allowed for the CPU in {{units}}. This value must be between {{param|MinFrequency}} and {{param|MaxFrequency}}, and part of the {{param|ScalingAvailableFrequencies}} list. This value must be less than {{param|ScalingMaxFrequency}}. The maximum operating frequency allowed for the CPU in {{units}}. This value must be between {{param|MinFrequency}} and {{param|MaxFrequency}}, and part of the {{param|ScalingAvailableFrequencies}} list. This value must be greater than {{param|ScalingMinFrequency}}. The available frequencies for CPU scaling in {{units}}. Indicates the CPU frequency governor to be used. A list of available CPU frequency governors for this CPU. This object describes the displays attached to the device and the sessions that can render on the displays. {{numentries}} {{numentries}} This object describes a screen attached to the display device. In the case of multiple screens, each screen will be given a unique position within the coordinate space of all screens via {{param|PosX}} and {{param|PosY}}. This means that a session can be on zero, one or many screens at once depending on the position and dimensions of the session in the coordinate space. Enables/disables the screen. The width of this display, expressed in {{units}}. The height of this display, expressed in {{units}}. The physical width of this display, expressed in {{units}}. The physical height of this display, expressed in {{units}}. The current refresh duration (1/refresh rate) of this display, expressed in {{units}}. The FourCC pixel format of this display. The display technology type. The horizontal position of this screen's top left corner expressed in {{units}} within the coordinate space of all the screens. This acts to position the screen relative to other screens. In the case of a single screen, the position will always be 0. The vertical position of this screen's top left corner expressed in {{units}} within the coordinate space of all the screens. This acts to position the screen relative to other screens. In the case of a single screen, the position will always be 0. Represents sessions that can render and be composited together on screen. Each session has a position, z-order and visibility that can be controlled when the sessions are composited together on the display. Enables/disables the session. If disabled, the session will not be shown on the display, and new processes will not be allowed to connect to the session. Status of the session. The session is disabled. The session is enabled, but has nothing to display. The session has active output to display, but it is either occluded by other sessions or hidden. The session output is currently fully visible (i.e. not occluded by another session or hidden). The session is in an error state (e.g. Path is not valid location). Controls whether the user is allowed to change the positions of GUI windows associated with this session. Controls whether the user is allowed to resize the GUI windows associated with this session. Controls whether a session is hidden. If hidden, any graphics from the session will not be shown on the display. Controls whether this session has exclusive access. When the session is not hidden and {{param}} is {{true}}, all sessions for which {{param}} is not {{true}} will be hidden. Path to allow clients to connect to the session to display their UI (for example a Wayland Unix domain socket). The path MUST use the file URI scheme {{bibref|RFC8089|The file URI Scheme}}. Z-order (draw order) of sessions. Lower numbers will be drawn first, and may be occluded by higher numbers. If two sessions have the same z-order, the session with the earlier index will be drawn first. The horizontal position of this session's top left corner within the coordinate space, expressed in {{units}}. This acts to position the session within one or more screens. The vertical position of this session's top left corner within the coordinate space, expressed in {{units}}. This acts to position the session within one or more screens. The maximum width of the session within the coordinate space, expressed in {{units}}. This clips the available area that a session can render to. The maximum height of the session within the coordinate space, expressed in {{units}}. This clips the available area that a session can render to. Set the geometry of the session. Specifies the Screen that coordinates provided should be relative to. If no screen is provided the coordinates will be relative to 0. Set the session to fullscreen updating the PosX, PosY, Width and Height unless they are provided If a Screen is provided the dimensions will be fullscreen to that single screen, otherwise it will be set to cover all screens. The updated horizontal position for the session in {{units}}. The updated vertical position for the session in {{units}}. The updated width for the session in {{units}}. The updated height for the session in {{units}}.