TR-069 Device:2 Root Data Model definition [CWMP]tr-181-2-14-1-cwmp.xml |
|||
DATA MODEL DEFINITION |
License
Copyright (c) 2010-2019, Broadband Forum
The undersigned members have elected to grant the copyright to
their contributed material used in this software:
Copyright (c) 2017-2019 ARRIS Enterprises, LLC.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The above license is used as a license under copyright only. Please reference the Forum IPR Policy for patent licensing terms https://www.broadband-forum.org/ipr-policy.
Any moral rights which are necessary to exercise under the above license grant are also deemed granted under this license.
Data Types
The Parameters defined in this specification make use of a limited subset of the default SOAP data types [SOAP1.1]. These data types and the named data types used by this specification are described below.
Note: A Parameter that is defined to be one of the named data types is reported as such at the beginning of the Parameter’s description via a reference back to the associated data type definition (e.g. [MACAddress]). However, such parameters still indicate their SOAP data types.
Data Type | Base Type | Description |
---|---|---|
base64 | - | Base64 encoded binary (no line-length limitation). A minimum and maximum allowed length can be indicated using the form base64(Min:Max), where Min and Max are the minimum and maximum length in characters before Base64 encoding. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in base64(Max). Multiple comma-separate ranges can be specified, in which case the length MUST be in one of the ranges. |
boolean | - | Boolean, where the allowed values are 0 or 1 (or equivalently, true or false). |
dateTime | - | The subset of the ISO 8601 date-time format defined by the SOAP dateTime type [SOAP1.1]. |
decimal | - | Decimal number, with optional sign and optional fractional part. For some decimal types, a value range is given using the form decimal(Min:Max) or decimal(Min:Max step Step) where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1.0. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges. |
hexBinary | - | Hex encoded binary. A minimum and maximum allowed length can be indicated using the form hexBinary(Min:Max), where Min and Max are the minimum and maximum length in characters before Hex Binary encoding. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in hexBinary(Max). Multiple comma-separated ranges can be specified, in which case the length MUST be in one of the ranges. |
int | - | Integer in the range -2147483648 to +2147483647, inclusive. For some int types, a value range is given using the form int(Min:Max) or int(Min:Max step Step) where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges. |
long | - | Long integer in the range -9223372036854775808 to 9223372036854775807, inclusive. For some long types, a value range is given using the form long(Min:Max) or long(Min:Max step Step), where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges. |
string | - | For strings, a minimum and maximum allowed length can be indicated using the form string(Min:Max), where Min and Max are the minimum and maximum string length in characters. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in string(Max). Multiple comma-separated ranges can be specified, in which case the string length will be in one of the ranges. |
unsignedInt | - | Unsigned integer in the range 0 to 4294967295, inclusive. For some unsignedInt types, a value range is given using the form unsignedInt(Min:Max) or unsigned(Min:Max step Step), where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges. |
unsignedLong | - | Unsigned long integer in the range 0 to 18446744073709551615, inclusive. For some unsignedLong types, a value range is given using the form unsignedLong(Min:Max) or unsignedLong(Min:Max step Step), where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges. |
Alias | string(:64) | A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
|
Dbm1000 | int | The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. |
DiagnosticsState | string | Indicates the availability of diagnostics data. Enumeration of: Enumeration of:
If the ACS sets the value of this parameter to Requested, the CPE MUST initiate the corresponding diagnostic test. When writing, the only allowed values are Requested and Canceled. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set, and any errors or inconsistencies in the test parameters MUST be detected, either prior to or at the same time as (in the same SetParameterValues) setting this parameter to Requested. When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic test. When the test is completed, the value of this parameter MUST be either Complete (if the test completed successfully), or one of the Error values listed above. If the value of this parameter is anything other than Complete, the values of the results parameters for this test are indeterminate. When the diagnostic initiated by the ACS is completed (successfully or not), but not if it is canceled for any reason, the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message. After the diagnostic is complete, the value of all result parameters (all read-only parameters in this object) MUST be retained by the CPE until either this diagnostic is run again, or the CPE reboots. After a reboot, if the CPE has not retained the result parameters from the most recent test, it MUST set the value of this parameter to None. Modifying any of the writable parameters in this object except for this one MUST result in the value of this parameter being set to None. While the test is in progress, modifying any of the writable parameters in this object except for this one MUST result in the test being terminated and the value of this parameter being set to None. While the test is in progress, setting this parameter to Requested (and possibly modifying other writable parameters in this object) MUST result in the test being terminated and then restarted using the current values of the test parameters. While the test is in progress, setting this parameter to Canceled MUST result in the test being canceled and the value of this parameter being set to None. If the CPE does not support the Canceled value, it MUST return a SPV error with “Invalid Parameter value” (9007) to the ACS instead. |
IEEE_EUI64 | string(:23) | The IEEE EUI 64-bit identifier as defined in [IEEE_EUI64]. The IEEE defined 64-bit extended unique identifier (EUI-64) is a concatenation of:
Possible patterns:
|
IPAddress | string(:45) | IP address, i.e. IPv4 address (or IPv4 subnet mask) or IPv6 address. All IPv4 addresses and subnet masks MUST be represented as strings in IPv4 dotted-decimal notation. Here are some examples of valid IPv4 address textual representations:
All IPv6 addresses MUST be represented using any of the 3 standard textual representations defined in [RFC4291] Sections 2.2.1, 2.2.2 and 2.2.3. Both lower-case and upper-case letters can be used, but use of lower-case letters is RECOMMENDED. Here are some examples of valid IPv6 address textual representations:
IPv6 addresses MUST NOT include zone identifiers. Zone identifiers are discussed in [Section 6/RFC4007]. Unspecified or inapplicable addresses (or IPv4 subnet masks) MUST be represented as empty strings unless otherwise specified by the parameter definition. |
IPPrefix | string(:49) | IPv4 or IPv6 routing prefix in Classless Inter-Domain Routing (CIDR) notation [RFC4632]. This is specified as an IP address followed by an appended “/n” suffix, where n (the prefix size) is an integer in the range 0-32 (for IPv4) or 0-128 (for IPv6) that indicates the number of (leftmost) ‘1’ bits of the routing prefix.
This notation can also represent individual addresses by specifying all bits.
If the IP address part is unspecified or inapplicable, it MUST be an empty string unless otherwise specified by the parameter definition. In this case the IP prefix will be of the form “/n”. If the entire IP prefix is unspecified or inapplicable, it MUST be an empty string unless otherwise specified by the parameter definition. |
IPv4Address | IPAddress(:45) | IPv4 address (or subnet mask). Can be any IPv4 address that is permitted by the IPAddress data type. Possible patterns:
|
IPv4Prefix | IPPrefix(:49) | IPv4 address prefix. Can be any IPv4 prefix that is permitted by the IPPrefix data type. Possible patterns:
|
IPv6Address | IPAddress(:45) | IPv6 address. Can be any IPv6 address that is permitted by the IPAddress data type. |
IPv6Prefix | IPPrefix(:49) | IPv6 address prefix. Can be any IPv6 prefix that is permitted by the IPPrefix data type. |
MACAddress | string(:17) | All MAC addresses are represented as strings of 12 hexadecimal digits (digits 0-9, letters A-F or a-f) displayed as six pairs of digits separated by colons. Unspecified or inapplicable MAC addresses MUST be represented as empty strings unless otherwise specified by the parameter definition. Possible patterns:
|
PSDBreakPointIndexAndLevel | unsignedInt[2:2] |
|
PSMBreakPointIndexAndLevel | unsignedInt[2:2] |
|
SELTPAttenuationCharacteristicsIndexAndTFlog | unsignedInt[2:2] |
|
SST | string | Service Slice Type (SST). Enumeration of:
|
StatsCounter32 | unsignedInt | A 32-bit statistics parameter, e.g. a byte counter. This data type SHOULD NOT be used for statistics parameters whose values might become greater than the maximum value that can be represented as an unsignedInt (i.e. 0xffffffff, referred to below as maxval). StatsCounter64 SHOULD be used for such parameters. The value maxval indicates that no data is available for this parameter. In the unlikely event that the actual value of the statistic is maxval, the CPE SHOULD return maxval - 1. The actual value of the statistic might be greater than maxval. Such values SHOULD wrap around through zero. The term packet is to be interpreted as the transmission unit appropriate to the protocol layer in question, e.g. an IP packet or an Ethernet frame. |
StatsCounter64 | unsignedLong | A 64-bit statistics parameter, e.g. a byte counter. This data type SHOULD be used for all statistics parameters whose values might become greater than the maximum value that can be represented as an unsignedInt. The maximum value that can be represented as an unsignedLong (i.e. 0xffffffffffffffff) indicates that no data is available for this parameter. The term packet is to be interpreted as the transmission unit appropriate to the protocol layer in question, e.g. an IP packet or an Ethernet frame. |
UERComplex | int[2:2] | Pair of 32-bit signed integers a(i),b(i) with each pair representing a complex component of the uncalibrated echo response (UER);
|
URI | string(:2048) | Uniform Resource Identifier. See [RFC3986]. |
URL | URI(:2048) | Uniform Resource Locator. See [RFC3986] (URI), [IANA-uri-schemes], and individual URI scheme RFCs such as [RFC7252] (coap, coaps) and [RFC7230] (http, https). |
UUID | string(36) | Universally Unique Identifier. See [RFC4122]. Possible patterns:
|
ZigBeeNetworkAddress | string(:4) | The ZigBee 16-bit network address (NWK) as defined in [ZigBee2007]. The address is assigned to a device by the network layer and used by the network layer for routing messages between devices. Possible patterns:
|
References
[3GPP-HSPA] | High Speed Packet data Access (HSPA), 3GPP. |
[3GPP-TS.23.003] | 3GPP TS 23.003, Numbering, addressing and identification, 3GPP CT WG4. |
[3GPP-TS.23.501] | 3GPP TS 23.501, System architecture for the 5G System (5GS); Stage 2, 3GPP SA WG2. |
[3GPP-TS.24.008] | 3GPP TS 24.008, Mobile radio interface Layer 3 specification; Core network protocols; Stage 3, 3GPP CT WG1. |
[3GPP-TS.24.301] | 3GPP TS 24.301, Non-Access-Stratum (NAS) protocol for Evolved Packet System (EPS); Stage 3, 3GPP CT WG1. |
[3GPP-TS.24.501] | 3GPP TS 24.501, Non-Access-Stratum (NAS) protocol for 5G System (5GS); Stage 3, 3GPP CT WG1. |
[3GPP-TS.24.526] | 3GPP TS 24.526, User Equipment (UE) policies for 5G System (5GS); Stage 3, 3GPP CT WG1. |
[3GPP-TS.25.171] | 3GPP TS 25.171, Requirements for support of Assisted Global Positioning System (A-GPS), 3GPP RAN WG4. |
[802.11-2007] | IEEE Std 802.11-2007, Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications, IEEE, 2007. |
[802.11-2012] | IEEE Std 802.11-2012, Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications, IEEE, March 2012. |
[802.11-2016] | IEEE Std 802.11-2016, Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications, IEEE, December 2016. |
[802.11a-1999] | IEEE Std 802.11a-1999, High-speed Physical Layer in the 5 GHz band, IEEE, 1999. |
[802.11ac-2013] | IEEE Std 802.11ac-2013, Enhancements for Very High Throughput for Operation in Bands below 6 GHz, IEEE, December 2013. |
[802.11ax] | IEEE Std 802.11ax, Enhancements for High Efficiency WLAN, IEEE, May 2021. |
[802.11b-1999] | IEEE Std 802.11b-1999, Higher Speed Physical Layer Extension in the 2.4 GHz band, IEEE, 1999. |
[802.11g-2003] | IEEE Std 802.11g-2003, Further Higher Data Rate Extension in the 2.4 GHz Band, IEEE, 2003. |
[802.11h-2003] | IEEE Std 802.11h-2003, Spectrum and Transmit Power Management Extensions, IEEE, 2003. |
[802.11n-2009] | IEEE Std 802.11n-2009, Amendment 5: Enhancements for Higher Throughput, IEEE, 2009. |
[802.1AB-2009] | IEEE Std 802.1AB-2009, Station and Media Access Control Connectivity Discovery, IEEE, 2009. |
[802.1ad-2005] | IEEE Std 802.1ad-2005, Virtual Bridged Local Area Networks Amendment 4: Provider Bridges, IEEE, May 2005. |
[802.1AX-2014] | IEEE Std 802.1AX-2014, IEEE Standard for Local and metropolitan area networks - Link Aggregation, IEEE, 2014. |
[802.1D-2004] | IEEE Std 802.1D-2004, Media Access Control (MAC) Bridges, IEEE, 2004. |
[802.1Q-2005] | IEEE Std 802.1Q-2005, Virtual Bridged Local Area Networks, IEEE, 2006. |
[802.1Q-2011] | IEEE Std 802.1Q-2011, MAC Bridges and Virtual Bridge Local Area Networks, IEEE, 2011. |
[802.1x-2004] | IEEE Std 802.1x-2004, Standards for Local and Metropolitan Area Networks: Port based Network Access Control, IEEE, 2004. |
[802.3-2012_section6] | IEEE 802.3-2012 - Section Six, IEEE Standard for Ethernet - Section Six, IEEE, December 2012. |
[802.3-2015] | IEEE Std 802.3-2015, IEEE Standard for Ethernet, IEEE, 2015. |
[BLUE] | Blue, A New Class of Active Queue Management Algorithms. |
[BPF] | BPF, Berkeley Packet Filter Syntax, FreeBSD.org, October 2016. |
[DataElements-v1.0] | Data Elements Specification, Data Elements Specification Version 1.0, January 2019. |
[DLNA-NDIG] | DLNA Networked Device Interoperability Guidelines, DLNA Networked Device Interoperability Guidelines, Volume 2: Media Format Profiles., DLNA, October 2006. |
[DNS-SD] | RFC 6763, DNS-Based Service Discovery, IETF, 2013. |
[DSLite] | RFC 6333, Dual-Stack Lite Broadband Deployments Following IPv4 Exhaustion, IETF, 2011. |
[DSLite-options] | RFC 6334, Dynamic Host Configuation Protocol for IPv6 (DHCPv6) Option for Dual-Stack Lite, IETF, 2011. |
[DVB-TS.102.824] | TS 102 824, Digital Video Broadcasting (DVB);Remote Management and Firmware Update System for DVB IP Services, ETSI, July 2008. |
[ETSIBRAN] | ETSI EN 301 893, Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the RTTE Directive, ETSI. |
[ETSIM2MFA] | ETSI TS 102 690 v1.1.6, Machine-to-Machine Communications (M2M Functional Architecture), ETSI, June 2012. |
[ETSIM2MInterfaces] | ETSI TS 102 921 v1.1.6, M2M mIa, dIa and mId Interfaces, ETSI, August 2012. |
[G.9701] | G.9701, Fast access to subscriber terminals (G.fast)- Physical layer specification, ITU-T, 2014. |
[G.988] | G.988, ONU management and control interface (OMCI) specification, ITU-T, 2010. |
[G.993.1] | G.993.1, Very high speed digital subscriber line transceivers, ITU-T. |
[G.993.2] | G.993.2, Very high speed digital subscriber line transceivers 2 (VDSL2), ITU-T. |
[G.9954] | G.9954, Phoneline networking transceivers - Enhanced physical, media access, and link layer specifications (HPNA 3.0 and 3.1), ITU-T, 2007. |
[G.996.2] | G.996.2, Single-ended line testing for digital subscriber lines (DSL), ITU-T. |
[G.9960] | G.9960, Unified high-speed wire-line based home networking transceivers - System architecture and physical layer specification, ITU-T. |
[G.9961] | G.9961, Unified high-speed wire-line based home networking transceivers - Data link layer specification, ITU-T. |
[G.9962] | G.9962, Unified high-speed wire-line based home networking transceivers - Management specification, ITU-T. |
[G.9964] | G.9964, Unified high-speed wire-line based home networking transceivers - Power spectral density specification, ITU-T. |
[G.997.1] | G.997.1, Physical layer management for digital subscriber line (DSL) transceivers, ITU-T. |
[G.997.2] | G.997.2, Physical layer management for FAST transceivers, ITU-T, 2015. |
[G.9973] | G.9973, Protocol for identifying home network topology, ITU-T, 2011. |
[G.998.1] | G.998.1, ATM-based Multi-Pair Bonding, ITU-T, 2005. |
[G.998.2] | G.998.2, Ethernet-based Multi-Pair Bonding, ITU-T, 2005. |
[G.998.3] | G.998.3, Multi-Pair Bonding Using Time-Division Inverse Multiplexing, ITU-T, 2005. |
[HPAV1.1] | HomePlug™ AV Specification, Version 1.1, HomePlug Alliance, 2007. |
[HTML4.01] | HTML 4.01 Specification, W3C. |
[IANA-protocolnumbers] | IANA Protocol Numbers, Protocol Numbers, IANA. |
[IANA-uri-schemes] | IANA Uniform Resource Identifier (URI) Schemes Registry, Uniform Resource Identifier (URI) Schemes, IANA. |
[IANAifType] | IANAifType, IANAifType-MIB DEFINITIONS, IANA, 2009. |
[ICSA-Baseline] | ICSA Baseline Modular Firewall Certification Criteria, Baseline module - version 4.1, ICSA Labs, 2008. |
[ICSA-Residential] | ICSA Residential Modular Firewall Certification Criteria, Required Services Security Policy - Residential Category module - version 4.1, ICSA Labs, 2008. |
[IEEE1905.1a] | IEEE 1905.1a, IEEE Std 1905.1a, Convergent Digital Home Network for Heterogeneous Technologies Amendment 1: Support of new MAC/PHYs and enhancements, IEEE, December 2014., IEEE, December 2014. |
[IEEE_EUI64] | Guidelines for 64-bit Global Identifier (EUI-64) Registration Authority, Guidelines for 64-bit Global Identifier (EUI-64) Registration Authority, IEEE, March 1997. |
[IKEv2-params] | IKEv2 Parameters, Internet Key Exchange Version 2 (IKEv2) Parameters, IANA. |
[IPDR-FTP] | IPDR File Transfer Protocol, IPDR/File Transfer Protocol, TM Forum. |
[IPDR-SP] | IPDR Streaming Protocol, IPDR Streaming Protocol (IPDR/SP) Specification, TM Forum. |
[IPDR-XDR] | IPDR XDR Encoding Format, IPDR/XDR Encoding Format, TM Forum. |
[IPDR-XML] | IPDR XML File Encoding Format, IPDR/XML File Encoding Format, TM Forum. |
[ISO-13818-6:1998] | ISO/IEC 13818-6:1998, Information Technology - Generic coding of moving pictures and associated audio information - Part 6: Extensions for DSM-CC, ISO, 1998. |
[ISO3166-1] | ISO 3166-1, Codes for the representation of names of countries and their subdivisions - Part 1: Country codes, ISO, 2006. |
[ISO639-1] | ISO 639-1, Codes for the representation of names of Languages - Part 1: Alpha-2 code, ISO, 2002. |
[ISO646-1991] | ISO/IEC 646-1991, Information Technology - ISO 7-bit coded character set for information interchange, ISO, 1991. |
[ITU-E.118] | ITU E.118, The international telecommunication charge card, International Telecommunication Union, May 2006. |
[ITU-E.164] | ITU E.164, The international public telecommunication numbering plan, International Telecommunication Union, October 2010. |
[ITU-X.733] | ITU X.733, Information technology - Open Systems Interconnection - Systems Management: Alarm reporting function, International Telecommunication Union, February 1992. |
[JJ-300.00] | JJ-300.00, Home-network Topology Identifying Protocol, TTC, 2011. |
[JJ-300.01] | JJ-300.01, The List of Device Categories, TTC, 2011. |
[LIBPCAP] | Libpcap, Libpcap File Format, Wireshark, 2015. |
[LMAPIFM] | RFC 8193, Information Model for Large-Scale Measurement Platforms (LMAPs), IETF, August 2017. |
[LMAPREG] | draft-ietf-ippm-metric-registry-12, Registry for Performance Metrics, IETF, June 30, 2017. |
[MAPv1.0] | Multi-AP Specification, Multi-AP Specification Version 1.0, June 2018. |
[MOCA11-MIB] | MOCA11-MIB, Remote Management of MoCA Interfaces using SNMP MIB, MoCA Alliance, 2009. |
[MoCAv1.0] | MoCA v1.0, MoCA MAC/PHY Specification v1.0, MoCA Alliance, 2009. |
[MoCAv1.1] | MoCA v1.1, MoCA MAC/PHY Specification v1.1 Extensions, MoCA Alliance, 2009. |
[MQTT31] | MQTT v3.1, MQ Telemetry Transport (MQTT) V3.1 Protocol Specification, 2010. |
[MQTT50] | MQTT Version 5.0, MQTT Version 5.0, Candidate OASIS Standard 02., OASIS Message Queuing Telemetry Transport (MQTT) TC, February 2019. |
[OUI] | Organizationally Unique Identifiers (OUIs). |
[PCPProxy] | RFC 7648, Port Control Protocol (PCP) Proxy Function, IETF, September 2015. |
[POSIXBase] | ISO/IEC/IEEE 9945, Information technology - Portable Operating System Interface (POSIX) Base Specifications, Issue 7, ISO/IEC/IEEE, September 2009. |
[RED] | References on RED (Random Early Detection) Queue Management. |
[RFC1035] | RFC 1035, Domain Names - Implementation and Specification, IETF, 1987. |
[RFC1323] | RFC 1323, TCP Extensions for High Performance, IETF, May 1992. |
[RFC1332] | RFC 1332, The PPP Internet Protocol Control Protocol (IPCP), IETF, 1992. |
[RFC1378] | RFC 1378, The PPP AppleTalk Control Protocol (ATCP), IETF, 1992. |
[RFC1552] | RFC 1552, The PPP Internetwork Packet Exchange Control Protocol (IPXCP), IETF, 1993. |
[RFC1661] | RFC 1661, The Point-to-Point Protocol (PPP), IETF, 1994. |
[RFC1877] | RFC 1877, PPP Internet Protocol Control Protocol Extensions for Name Server Addresses, IETF, 1995. |
[RFC1974] | RFC 1974, PPP Stac LZS Compression Protocol, IETF, 1996. |
[RFC2080] | RFC 2080, RIPng for IPv6, IETF, 1997. |
[RFC2097] | RFC 2097, The PPP NetBIOS Frames Control Protocol (NBFCP), IETF, 1997. |
[RFC2131] | RFC 2131, Dynamic Host Configuration Protocol, IETF. |
[RFC2132] | RFC 2132, DHCP Options and BOOTP Vendor Extensions, IETF. |
[RFC2225] | RFC 2225, Classical IP and ARP over ATM, IETF. |
[RFC2364] | RFC 2364, PPP Over AAL5, IETF, 1998. |
[RFC2474] | RFC 2474, Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers, IETF. |
[RFC2581] | RFC 2581, TCP Congestion Control, IETF, April 1999. |
[RFC2582] | RFC 2582, The NewReno Modification to TCP’s Fast Recovery Algorithm, IETF, April 1999. |
[RFC2616] | RFC 2616, Hypertext Transfer Protocol - HTTP/1.1, IETF, 1999. |
[RFC2684] | RFC 2684, Multiprotocol Encapsulation over ATM Adaptation Layer 5, IETF. |
[RFC2697] | RFC 2697, A Single Rate Three Color Marker, IETF. |
[RFC2698] | RFC 2698, A Two Rate Three Color Marker, IETF. |
[RFC2782] | RFC 2782, A DNS RR for specifying the location of services (DNS SRV), IETF, 2000. |
[RFC2784] | RFC 2784, Generic Routing Encapsulation (GRE), IETF, November 2000. |
[RFC2818] | RFC 2818, HTTP Over TLS, IETF, May 2000. |
[RFC2819] | RFC 2819, Remote Network Monitoring Management Information Base, IETF, 2000. |
[RFC2863] | RFC 2863, The Interfaces Group MIB, IETF, 2000. |
[RFC2865] | RFC 2865, Remote Authentication Dial In User Service (RADIUS), IETF, 2000. |
[RFC2866] | RFC 2866, RADIUS Accounting, IETF, 2000. |
[RFC2869] | RFC 2869, RADIUS Extensions, IETF, 2000. |
[RFC2890] | RFC 2890, Key and Sequence Number Extensions to GRE, IETF, November 2000. |
[RFC2898] | RFC 2898, PKCS #5: Password-Based Cryptography Specification Version 2.0, IETF. |
[RFC2974] | RFC 2974, Session Announcement Protocol, IETF, October 2000. |
[RFC3004] | RFC 3004, The User Class Option for DHCP, IETF. |
[RFC3066] | RFC 3066, Tags for the Identification of Languages, IETF. |
[RFC3232] | RFC 3232, “Assigned Numbers: RFC 1700 is Replaced by an On-line Database”, IETF, 2002. |
[RFC3315] | RFC 3315, Dynamic Host Configuration Protocol for IPv6 (DHCPv6), IETF, 2003. |
[RFC3339] | RFC 3339, Date and Time on the Internet: Timestamps, IETF, July, 2002. |
[RFC3489] | RFC 3489, STUN - Simple Traversal of User Datagram Protocol (UDP) Through Network Address Translators (NATs), IETF. |
[RFC3596] | RFC 3596, DDNS Extensions to Support IP Version 6, IETF, 2003. |
[RFC3633] | RFC 3633, IPv6 Prefix Options for Dynamic Host Configuration Protocol (DHCP) version 6, IETF, 2003. |
[RFC3646] | RFC 3646, DNS Configuration options for Dynamic Host Configuration Protocol for IPv6 (DHCPv6), IETF, 2003. |
[RFC3775] | RFC 3775, Mobility Support in IPv6, IETF, 2004. |
[RFC3925] | RFC 3925, Vendor-Identifying Vendor Options for Dynamic Host Configuration Protocol version 4 (DHCPv4), IETF. |
[RFC3926] | RFC 3926, FLUTE - File Delivery over Unidirectional Transport, IETF, October 2004. |
[RFC3927] | RFC 3927, Dynamic Configuration of IPv4 Link-Local Addresses, IETF, 2005. |
[RFC3931] | RFC 3931, Layer Two Tunneling Protocol - Version 3 (L2TPv3), IETF, March 2005. |
[RFC3948] | RFC 3948, UDP Encapsulation of IPsec ESP Packets, IETF, January 2005. |
[RFC3986] | RFC 3986, Uniform Resource Identifier (URI): Generic Syntax, IETF. |
[RFC4007] | RFC 4007, IPv6 Scoped Address Architecture, IETF. |
[RFC4122] | RFC 4122, A Universally Unique IDentifier (UUID) URN Namespace, IETF, 2005. |
[RFC4180] | RFC4180, Common Format and MIME Type for Comma-Separated Values (CSV) Files, IETF, October 2005. |
[RFC4191] | RFC 4191, Default Router Preferences and More-Specific Routes, IETF, 2005. |
[RFC4193] | RFC 4193, Unique Local IPv6 Unicast Addresses, IETF, 2005. |
[RFC4242] | RFC 4242, Information Refresh Time Option for Dynamic Host Configuration Protocol for IPv6 (DHCPv6), IETF, 2005. |
[RFC4291] | RFC 4291, IP Version 6 Addressing Architecture, IETF, 2006. |
[RFC4292] | RFC 4292, IP Forwarding Table MIB, IETF, 2006. |
[RFC4293] | RFC 4293, Management Information Base for the Internet Protocol (IP), IETF, 2006. |
[RFC4301] | RFC 4301, Security Architecture for the Internet Protocol, IETF, December 2005. |
[RFC4302] | RFC 4302, IP Authentication Header, IETF, December 2005. |
[RFC4303] | RFC 4303, IP Encapsulating Security Payload (ESP), IETF, December 2005. |
[RFC4389] | RFC 4389, Neighbor Discovery Proxies (ND Proxy), IETF, 2006. |
[RFC4632] | RFC 4632, Classless Inter-domain Routing (CIDR): The Internet Address Assignment and Aggregation Plan, IETF, 2006. |
[RFC4719] | RFC 4719, Transport of Ethernet Frames over Layer 2 Tunneling Protocol Version 3 (L2TPv3), IETF, November 2006. |
[RFC4835] | RFC 4835, Cryptographic Algorithm Implementation Requirements for Encapsulating Security Payload (ESP) and Authentication Header (AH), IETF, 2007. |
[RFC4861] | RFC 4861, Neighbor Discovery for IP version 6 (IPv6), IETF, 2007. |
[RFC4862] | RFC 4862, IPv6 Stateless Address Autoconfiguration, IETF, 2007. |
[RFC5072] | RFC 5072, IP Version 6 over PPP, IETF, 2007. |
[RFC5139] | RFC 5139, Revised Civic Location Format For Presence Information Data Format Location Object (PIDF-LO), IETF, February 2008. |
[RFC5280] | RFC 5280, Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile, IETF, May 2008. |
[RFC5491] | RFC 5491, GEOPRIV Presence Information Data Format Location Object (PIDF-LO) Usage Clarification, Considerations, and Recommendations, IETF, March 2009. |
[RFC5625] | RFC 5625, DNS Proxy Implementation Guidelines, IETF, 2009. |
[RFC5969] | RFC 5969, IPv6 Rapid Deployment on IPv4 Infrastructures (6rd) - Protocol Specification, IETF, 2010. |
[RFC5996] | RFC 5996, Internet Key Exchange Protocol Version 2 (IKEv2), IETF, September 2010. |
[RFC6106] | RFC 6106, IPv6 Router Advertisement Option for DNS Configuration, IETF, 2010. |
[RFC6120] | RFC 6120, Extensible Messaging and Presence Protocol (XMPP) : Core, IETF, 2011. |
[RFC6887] | RFC 6887, Port Control Protocol (PCP), IETF, 2013. |
[RFC6970] | RFC 6970, Universal Plug and Play (UPnP) Internet Gateway Device (IGD) - Port Control Protocol (PCP) Interworking Function, IETF, 2013. |
[RFC7159] | RFC7159, The JavaScript Object Notation (JSON) Data Interchange Format, IETF, March 2014. |
[RFC7230] | RFC 7230, Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing, IETF, June 2014. |
[RFC7252] | RFC 7252, The Constrained Application Protocol (CoAP), IETF, June 2014. |
[RFC7291] | RFC 7291, DHCP Options for the Port Control Protocol (PCP), IETF, 2014. |
[RFC7348] | RFC 7348, Virtual eXtensible Local Area Network (VXLAN), IETF, August 2014. |
[RFC7395] | RFC 7395, An Extensible Messaging and Presence Protocol (XMPP) Subprotocol for WebSocket, IETF, October 2014. |
[RFC7398] | RFC 7398, A Reference Path and Measurement Points for Large-Scale Measurement of Broadband Performance, IETF, February 2015. |
[RFC7594] | RFC 7594, A Framework for Large-Scale Measurement of Broadband Performance (LMAP), IETF, September 2015. |
[RFC7597] | RFC 7597, Mapping of Address and Port with Encapsulation (MAP), IETF, July 2015. |
[RFC7598] | RFC 7598, DHCPv6 Options for configuration of Softwire Address and Port Mapped Clients, IETF, July 2015. |
[RFC7599] | RFC 7599, Mapping of Address and Port using Translation (MAP-T), IETF, July 2015. |
[RFC793] | RFC 793, Transmission Control Protocol, IETF, September 1981. |
[RFC8141] | RFC 8141, Uniform Resource Names (URNs), IETF, April 2017. |
[RFC862] | RFC 862, Echo Protocol, IETF, 1983. |
[RFC959] | RFC 959, File Transfer Protocol, IETF, 1985. |
[SOAP1.1] | Simple Object Access Protocol (SOAP) 1.1, W3C. |
[TR-064] | TR-064 Corrigendum 1, LAN-Side DSL CPE Configuration Specification, Broadband Forum, August 2015. |
[TR-069] | TR-069 Amendment 6, CPE WAN Management Protocol, Broadband Forum, April 2018. |
[TR-106] | TR-106 Amendment 8, Data Model Template for CWMP Endpoints and USP Agents, Broadband Forum, May 2018. |
[TR-124i5] | TR-124 Issue 5, Functional Requirements for Broadband Residential Gateway Devices, Broadband Forum, July 2016. |
[TR-124i6] | TR-124 Issue 6, Functional Requirements for Broadband Residential Gateway Devices, Broadband Forum, July 2020. |
[TR-143] | TR-143 Amendment 1 Corrigendum 1, Enabling Network Throughput Performance Tests and Statistical Monitoring, Broadband Forum, August 2015. |
[TR-159] | TR-159, Management Framework for xDSL Bonding, Broadband Forum, December 2008. |
[TR-181i2] | TR-181 Issue 2 Amendment 15, Device Data Model, Broadband Forum, January 2022. |
[TR-232] | TR-232, Bulk Data Collection, Broadband Forum, May 2012. |
[TR-262] | TR-262, Femto Component Objects, Broadband Forum, November 2011. |
[TR-304] | TR-304, Broadband Access Service Attributes and Performance Metrics, Broadband Forum, February 2015. |
[TR-390] | TR-390, Performance Measurement from Customer Equipment to IP Edge, Broadband Forum, May 2017. |
[TR-471] | TR-471, Maximum IP-Layer Capacity Metric, Related Metrics, and Measurements, Broadband Forum, December 2023. |
[UPA-PLC] | Universal Powerline Association, UPA. |
[UPnP-DAv1] | UPnP Device Architecture, UPnP Device Architecture 1.0, UPnP Forum, April 2008. |
[UPnP-DAv11] | UPnP Device Architecture 1.1, UPnP Device Architecture 1.1, UPnP Forum, October, 2008. |
[UPnP-DM:1] | UPnP Device Management:1, UPnP Device Management v1. |
[UPnP-IGD:1] | UPnP InternetGatewayDevice:1, InternetGatewayDevice:1 Device Template Version 1.01, UPnP, 2001. |
[UPnP-IGD:2] | UPnP InternetGatewayDevice:2, InternetGatewayDevice:2 Device Template Version 1.01, UPnP, 2010. |
[USB1.0] | USB 1.0, USB 1.0 Specification, USB-IF, January 1996. |
[USB2.0] | USB 2.0, USB 2.0 Specification, USB-IF, April 2000. |
[USB3.0] | USB 3.0, USB 3.0 Specification, USB-IF, November 2008. |
[WPS 2.0] | WSC 2.0, Wi-Fi Simple Configuration Technical Specification Version 2.0.x, Wi-Fi Alliance. |
[WPSv1.0] | Wi-Fi Protected Setup Specification Version 1.0h, Wi-Fi Alliance, 2006. |
[Z-Wave] | Z-Wave, Z-Wave website. |
[ZigBee] | ZigBee, ZigBee Alliance website. |
[ZigBee2007] | ZigBee 2007 Specification, ZigBee 2007 Specification, ZigBee Alliance, October 2007. |
Legend
Object definition. |
Parameter definition. |
Device:2.14 Data Model
For a given implementation of this data model, the Agent MUST indicate support for the highest version number of any object or parameter that it supports. For example, even if the Agent supports only a single parameter that was introduced in version 1.4, then it will indicate support for version 1.4. The version number associated with each object and parameter is shown in the Version column.
Name | Type | Write | Description | Object Default | Version |
---|---|---|---|---|---|
Device. | object | R | The top-level object for a Device. | - | 2.0 |
RootDataModelVersion | string(:32) | R | Root data model version, e.g. 2.4. For a vendor-defined root data model, this is the standard Broadband Forum model on which the vendor-defined model is based. Possible patterns:
This parameter MUST always be included in Inform messages. |
- | 2.4 |
InterfaceStackNumberOfEntries | unsignedInt | R | The number of entries in the InterfaceStack table. | - | 2.0 |
Device.Services. | object | R | This object contains general services information. | - | 2.0 |
Device.DeviceInfo. | object | R | This object contains general device information. | - | 2.0 |
DeviceCategory | string[] | R | Comma-separated list of strings. Each list item is a device category (e.g. “AV_TV” and “AV_Recorder”), or the value is an empty string if no such element is provided by the device. Note: It is assumed that this list might be used for HTIP (Home-network Topology Identifying Protocol) [JJ-300.00] and [G.9973]. Standard HTIP device categories are defined in [JJ-300.01]. In this case, the maximum length of the list is 127 and of each item is 31, and any non-HTIP device categories SHOULD NOT conflict with standard HTIP device categories. | - | 2.8 |
Manufacturer | string(:64) | R | The manufacturer of the CPE (human readable string). | - | 2.0 |
ManufacturerOUI | string(6) | R | Organizationally unique identifier of the device manufacturer. Represented as a six hexadecimal-digit value using all upper-case letters and including any leading zeros. Possible patterns:
Any change would indicate that it’s a new device and would therefore require a BOOTSTRAP Inform. |
- | 2.0 |
ModelName | string(:64) | R | Model name of the CPE (human readable string). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ModelNumber | string(:64) | R | The model number of the device (human readable string), or an empty string if no model number is provided by the device. Note: It is assumed that this string might be used for HTIP (Home-network Topology Identifying Protocol) [JJ-300.00] and [G.9973]. In this case, the maximum length of the string is 31. | - | 2.8 |
Description | string(:256) | R | A full description of the CPE device (human readable string). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ProductClass | string(:64) | R | Identifier of the class of product for which the serial number applies. That is, for a given manufacturer, this parameter is used to identify the product or class of product over which the SerialNumber parameter is unique. This value MUST remain fixed over the lifetime of the device, including across firmware updates. | - | 2.0 |
SerialNumber | string(:64) | R | Identifier of the particular device that is unique for the indicated class of product and manufacturer. This value MUST remain fixed over the lifetime of the device, including across firmware updates. | - | 2.0 |
HardwareVersion | string(:64) | R | A string identifying the particular CPE model and version. This parameter MUST always be included in Inform messages. |
- | 2.0 |
SoftwareVersion | string(:64) | R | A string identifying the software version currently installed in the CPE (i.e. version of the overall CPE firmware). To allow version comparisons, this element SHOULD be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 3.0.21 where the components mean: Major.Minor.Build. For CPEs that support multiple firmware images, the value for this parameter MUST be the software version of the active firmware image. This parameter MUST always be included in Inform messages. Active Notification MUST always be enabled for this parameter. |
- | 2.0 |
ActiveFirmwareImage | string | R | A full path reference to the row in the FirmwareImage table representing the currently running firmware image. | - | 2.12 |
BootFirmwareImage | string | W | A full path reference to the row in the FirmwareImage table of the firmware image that is to be loaded the next time the device boots. This parameter value cannot be empty and must point to a valid and enabled FirmwareImage object where the (FirmwareImage.{i}.Available parameter is set to ‘true’). Out of the factory, this parameter should be set to point to the firmware image the CPE will attempt to boot when first powered on. The firmware image instance referenced by this parameter must also have an Available parameter value of ‘true’. Attempting to set this parameter to point to a non-enabled firmware image MUST result in the CPE responding with a CWMP fault (9007). In situations where the CPE cannot boot the firmware image specified by this parameter and manages to boot a different firmware image, the CPE MUST NOT modify this value to point to the alternate firmware image that is currently active. | - | 2.12 |
AdditionalHardwareVersion | string[](:64) | R | Comma-separated list (maximum number of characters 64) of strings. Each entry is an additional version. Represents any additional hardware version information the vendor might wish to supply. | - | 2.0 |
AdditionalSoftwareVersion | string[](:64) | R | Comma-separated list (maximum number of characters 64) of strings. Each entry is an additional version. Represents any additional software version information the vendor might wish to supply. | - | 2.0 |
ProvisioningCode | string(:64) | W | Identifier of the primary service provider and other provisioning information, which MAY be used by the ACS to determine service provider-specific customization and provisioning parameters. This parameter MUST always be included in Inform messages. Active Notification MUST always be enabled for this parameter. |
- | 2.0 |
UpTime | unsignedInt | R | Time in seconds since the CPE was last restarted. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
FirstUseDate | dateTime | R | Date and time in UTC that the CPE first both successfully established an IP-layer network connection and acquired an absolute time reference using NTP or equivalent over that network connection. The CPE MAY reset this date after a factory reset. If NTP or equivalent is not available, this parameter, if present, SHOULD be set to the Unknown Time value. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
FirmwareImageNumberOfEntries | unsignedInt | R | The number of entries in the FirmwareImage table. | - | 2.12 |
VendorConfigFileNumberOfEntries | unsignedInt | R | The number of entries in the VendorConfigFile table. | - | 2.0 |
ProcessorNumberOfEntries | unsignedInt | R | The number of entries in the Processor table. | - | 2.1 |
VendorLogFileNumberOfEntries | unsignedInt | R | The number of entries in the VendorLogFile table. | - | 2.1 |
LocationNumberOfEntries | unsignedInt | R | The number of entries in the Location table. | - | 2.4 |
DeviceImageNumberOfEntries | unsignedInt | R | The number of entries in the DeviceImageFile table. | - | 2.11 |
SupportedDataModelNumberOfEntries | unsignedInt | R | The number of entries in the SupportedDataModel table. | - | 2.0 |
Device.ManagementServer. | object | R | This object contains parameters relating to the CPE’s association with an ACS. | - | 2.0 |
EnableCWMP | boolean | W | Enables and disables the CPE’s support for CWMP. false means that CWMP support in the CPE is disabled, in which case the device MUST NOT send any Inform messages to the ACS or accept any Connection Request notifications from the ACS. true means that CWMP support on the CPE is enabled. The subscriber can re-enable the CPE’s CWMP support either by performing a factory reset or by using a LAN-side protocol to change the value of this parameter back to true. The factory default value MUST be true. |
- | 2.0 |
URL | string(:2048) | W | The [URL] for the CPE to connect to the ACS using the CPE WAN Management Protocol. This parameter MUST be in the form of a valid HTTP or HTTPS URL. The host portion of this URL is used by the CPE for validating the ACS certificate when using SSL or TLS. Note that on a factory reset of the CPE, the value of this parameter might be reset to its factory value. If an ACS modifies the value of this parameter, it SHOULD be prepared to accommodate the situation that the original value is restored as the result of a factory reset. | - | 2.0 |
Username | string(:256) | W | Username used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management Protocol. This username is used only for HTTP-based authentication of the CPE. Note that on a factory reset of the CPE, the value of this parameter might be reset to its factory value. If an ACS modifies the value of this parameter, it SHOULD be prepared to accommodate the situation that the original value is restored as the result of a factory reset. | - | 2.0 |
Password | string(:256) | W | Password used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management Protocol. This password is used only for HTTP-based authentication of the CPE. Note that on a factory reset of the CPE, the value of this parameter might be reset to its factory value. If an ACS modifies the value of this parameter, it SHOULD be prepared to accommodate the situation that the original value is restored as the result of a factory reset. When read, this parameter returns an empty string, regardless of the actual value. |
- | 2.0 |
ScheduleReboot | dateTime | W | An absolute date and time in UTC at which time the CPE will perform a reboot. If a CWMP session is in progress at the specified time, the CPE MUST wait until the session has ended before performing the reboot. If the value specifies a date and time that has already passed (i.e., a past date and time), no reboot will be performed. | - | 2.10 |
DelayReboot | int(-1:) | W | The number of seconds from the time the CWMP session in which this parameter value is set is ended until the CPE performs a reboot. Whenever the CPE reboots, this value MUST be reset by the CPE to -1. | - | 2.10 |
PeriodicInformEnable | boolean | W | Whether or not the CPE MUST periodically send CPE information to the ACS using the Inform method call. | - | 2.0 |
PeriodicInformInterval | unsignedInt(1:) | W | The duration in seconds of the interval for which the CPE MUST attempt to connect with the ACS and call the Inform method if PeriodicInformEnable is true. | - | 2.0 |
PeriodicInformTime | dateTime | W | An absolute time reference in UTC to determine when the CPE will initiate the periodic Inform method calls. Each Inform call MUST occur at this reference time plus or minus an integer multiple of the PeriodicInformInterval. PeriodicInformTime is used only to set the phase of the periodic Informs. The actual value of PeriodicInformTime can be arbitrarily far into the past or future. For example, if PeriodicInformInterval is 86400 (a day) and if PeriodicInformTime is set to UTC midnight on some day (in the past, present, or future) then periodic Informs will occur every day at UTC midnight. These MUST begin on the very next midnight, even if PeriodicInformTime refers to a day in the future. The Unknown Time value defined in [Section 3.2/TR-106] indicates that no particular time reference is specified. That is, the CPE MAY locally choose the time reference, and needs only to adhere to the specified PeriodicInformInterval. If absolute time is not available to the CPE, its periodic Inform behavior MUST be the same as if the PeriodicInformTime parameter was set to the Unknown Time value. | - | 2.0 |
ParameterKey | string(:32) | R | ParameterKey provides the ACS a reliable and extensible means to track changes made by the ACS. The value of ParameterKey MUST be equal to the value of the ParameterKey argument from the most recent successful SetParameterValues, AddObject, or DeleteObject method call from the ACS. The CPE MUST set ParameterKey to the value specified in the corresponding method arguments if and only if the method completes successfully and no fault response is generated. If a method call does not complete successfully (implying that the changes requested in the method did not take effect), the value of ParameterKey MUST NOT be modified. The CPE MUST only modify the value of ParameterKey as a result of SetParameterValues, AddObject, DeleteObject, or due to a factory reset. On factory reset, the value of ParameterKey MUST be set to an empty string. This parameter MUST always be included in Inform messages. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ConnectionRequestURL | string(:2048) | R | The HTTP [URL] for an ACS to make a Connection Request notification to the CPE. In the form: http://host:port/path The host portion of the URL MAY be the IP address for the management interface of the CPE in lieu of a host name. Note: If the host portion of the URL is a literal IPv6 address then it MUST be enclosed in square brackets (see [Section 3.2.2/RFC3986]). This parameter MUST always be included in Inform messages. Active Notification MUST by default be enabled for this parameter. |
- | 2.0 |
ConnectionRequestUsername | string(:256) | W | Username used to authenticate an ACS making a Connection Request to the CPE. | - | 2.0 |
ConnectionRequestPassword | string(:256) | W | Password used to authenticate an ACS making a Connection Request to the CPE. When read, this parameter returns an empty string, regardless of the actual value. |
- | 2.0 |
UpgradesManaged | boolean | W | Indicates whether or not the ACS will manage upgrades for the CPE. If true, the CPE SHOULD NOT use other means other than the ACS to seek out available upgrades. If false, the CPE MAY use other means for this purpose. Note that an autonomous upgrade (reported via an “10 AUTONOMOUS TRANSFER COMPLETE” Inform Event code) SHOULD be regarded as a managed upgrade if it is performed according to ACS-specified policy. | - | 2.0 |
KickURL | string(:2048) | R | Present only for a CPE that supports the Kicked RPC method. LAN-accessible [URL] from which the CPE can be kicked to initiate the Kicked RPC method call. MUST be an absolute URL including a host name or IP address as would be used on the LAN side of the CPE. | - | 2.0 |
DownloadProgressURL | string(:2048) | R | Present only for a CPE that provides a LAN-side web page to show progress during a file download. LAN-accessible [URL] to which a web-server associated with the ACS MAY redirect a user’s browser on initiation of a file download to observer the status of the download. | - | 2.0 |
DefaultActiveNotificationThrottle | unsignedInt | W | This parameter is used to control throttling of active notifications sent by the CPE to the ACS. It defines the minimum number of seconds that the CPE MUST wait since the end of the last session with the ACS before establishing a new session for the purpose of delivering an active notification. In other words, if CPE needs to establish a new session with the ACS for the sole purpose of delivering an active notification, it MUST delay establishing such a session as needed to ensure that the minimum time since the last session completion has been met. The time is counted since the last successfully completed session, regardless of whether or not it was used for active notifications or other purposes. However, if connection to the ACS is established for purposes other than just delivering active notifications, including for the purpose of retrying a failed session, such connection MUST NOT be delayed based on this parameter value, and the pending active notifications MUST be communicated during that connection. The time of the last session completion does not need to be tracked across reboots. | - | 2.0 |
CWMPRetryMinimumWaitInterval | unsignedInt(1:65535) | W | Configures the first session retry wait interval, in seconds, as specified in [Section 3.2.1.1/TR-069]. A value of 5 corresponds to the default behavior that is described in [TR-069]. The device MUST use a random value between CWMPRetryMinimumWaitInterval and (CWMPRetryMinimumWaitInterval * CWMPRetryIntervalMultiplier / 1000) as the first retry wait interval. Other values in the retry pattern MUST be calculated using this value as a starting point. | - | 2.0 |
CWMPRetryIntervalMultiplier | unsignedInt(1000:65535) | W | Configures the retry interval multiplier as specified in [Section 3.2.1.1/TR-069]. This value is expressed in units of 0.001. Hence the values of the multiplier range between 1.000 and 65.535. A value of 2000 corresponds to the default behavior that is described in [TR-069]. The device MUST use a random value between CWMPRetryMinimumWaitInterval and (CWMPRetryMinimumWaitInterval * CWMPRetryIntervalMultiplier / 1000) as the first retry wait interval. Other values in the retry pattern MUST be calculated using this value as a starting point. | - | 2.0 |
HTTPConnectionRequestEnable | boolean | W | Enables or disables HTTP connection request handling on the CPE. If HTTP connection request handling is disabled (HTTPConnectionRequestEnable is set to false), ConnectionRequestURL MUST be set to an empty string and the CPE MUST close the port used by the HTTP connection request server. The factory default value MUST be true. |
- | 2.11 |
UDPConnectionRequestAddress | string(:256) | R | Address and port to which an ACS MAY send a UDP Connection Request to the CPE (see [Annex G/TR-069]). This parameter is represented in the form of an Authority element as defined in [RFC3986]. The value MUST be in one of the following two forms: host:port host
|
- | 2.0 |
STUNEnable | boolean | W | Enables or disables the use of STUN by the CPE. This applies only to the use of STUN in association with the ACS to allow UDP Connection Requests. | - | 2.0 |
STUNServerAddress | string(:256) | W | Host name or IP address of the STUN server for the CPE to send Binding Requests if STUN is enabled via STUNEnable. If is an empty string and STUNEnable is true, the CPE MUST use the address of the ACS extracted from the host portion of the ACS URL. | - | 2.0 |
STUNServerPort | unsignedInt(0:65535) | W | Port number of the STUN server for the CPE to send Binding Requests if STUN is enabled via STUNEnable. By default, this SHOULD be the equal to the default STUN port, 3478. | - | 2.0 |
STUNUsername | string(:256) | W | If is not an empty string, the value of the STUN USERNAME attribute to be used in Binding Requests (only if message integrity has been requested by the STUN server). If is an empty string, the CPE MUST NOT send STUN Binding Requests with message integrity. | - | 2.0 |
STUNPassword | string(:256) | W | The value of the STUN Password to be used in computing the MESSAGE-INTEGRITY attribute to be used in Binding Requests (only if message integrity has been requested by the STUN server). When read, this parameter returns an empty string, regardless of the actual value. |
- | 2.0 |
STUNMaximumKeepAlivePeriod | int(-1:) | W | If STUN Is enabled, the maximum period, in seconds, that STUN Binding Requests MUST be sent by the CPE for the purpose of maintaining the binding in the Gateway. This applies specifically to Binding Requests sent from the UDP Connection Request address and port. A value of -1 indicates that no maximum period is specified. | - | 2.0 |
STUNMinimumKeepAlivePeriod | unsignedInt | W | If STUN Is enabled, the minimum period, in seconds, that STUN Binding Requests can be sent by the CPE for the purpose of maintaining the binding in the Gateway. This limit applies only to Binding Requests sent from the UDP Connection Request address and port, and only those that do not contain the BINDING-CHANGE attribute. This limit does not apply to retransmissions following the procedures defined in [RFC3489]. | - | 2.0 |
NATDetected | boolean | R | When STUN is enabled, this parameter indicates whether or not the CPE has detected address and/or port mapping in use. A true value indicates that the received MAPPED-ADDRESS in the most recent Binding Response differs from the CPE’s source address and port. When STUNEnable is false, this value MUST be false. | - | 2.0 |
AliasBasedAddressing | boolean | R | Indicates whether or not the Alias-Based Addressing Mechanism is supported. A true value indicates that the CPE supports the Alias-Based Addressing Mechanism, as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069]. This parameter MUST always be included in Inform messages. |
- | 2.3 |
InstanceMode | string | W | Instance identification mode as defined in [Section 3.6.1/TR-069]. When AliasBasedAddressing is true, InstanceMode is used by the ACS to control whether the CPE will use Instance Numbers or Instance Aliases in returned Path Names. Enumeration of:
The factory default value MUST be InstanceNumber. |
- | 2.3 |
AutoCreateInstances | boolean | W | Enable or disable the Auto-Create Instance Mechanism. When AliasBasedAddressing is true, AutoCreateInstances indicates whether or not the CPE will automatically create instances while processing a SetParameterValues RPC (as defined in [A.3.2.1/TR-069]). *A true value indicates that the CPE will perform auto-creation of instances when the Alias-Based Addressing Mechanism is used in SetParameterValues RPC. *A false value indicates that the CPE will not create new object instances. Instead, it will reject the setting of parameters in unrecognized instances and respond with a fault code. This parameter is REQUIRED for any CPE supporting Alias-Based Addressing. The factory default value MUST be false. |
- | 2.3 |
ManageableDeviceNumberOfEntries | unsignedInt | R | The number of entries in the ManageableDevice table. | - | 2.0 |
ManageableDeviceNotificationLimit | unsignedInt | W | The minimum time, in seconds, between Active Notifications resulting from changes to the ManageableDeviceNumberOfEntries (if Active Notification is enabled). | - | 2.7 |
EmbeddedDeviceNumberOfEntries | unsignedInt | R | The number of entries in the EmbeddedDevice table. | - | 2.3 |
VirtualDeviceNumberOfEntries | unsignedInt | R | The number of entries in the VirtualDevice table. | - | 2.3 |
SupportedConnReqMethods | string[] | R | Comma-separated list of strings. The connection request methods supported by this ManagementServer. Each list item is an enumeration of:
|
- | 2.7 |
ConnReqXMPPConnection | string | W | The value MUST be the Path Name of the XMPP.Connection instance that is used for connection requests to this ManagementServer. If the referenced object is deleted, the parameter value MUST be set to an empty string. | - | 2.7 |
ConnReqAllowedJabberIDs | string(:256)[:32]() | W | When an XMPP Connection Request is sent to a CPE the XMPP IQ Stanza will contian a “from” address that contains the Jabber ID of the initiating entity.
This parameter is a Comma-separated list (up to 32 items) (length ) of strings (maximum number of characters per item 256). Each entry represents a Jabber ID, or address, that is allowed to initiate an XMPP Connection Request.
Each Jabber ID is allowed to be either a “Full JID” (containing a local-part, domain-part, and resource-part in the following format: “local-part@domain-part/resource-part”) or a “Bare JID” (containing a local-part and a domain-part in the following format: “local-part@domain-part”). “Full JID” entries require an exact match whereas “Bare JID” entries are a wildcard match and will match any Jabber ID with the same local-part and domain-part independent of the resource-part.
For example, if ConnReqAllowedJabberIDs contained “ACS1@tr069.example.com, ACS2@tr-069.example.com/resource1” then the following incoming “from” addresses would be allowed:
|
- | 2.7 |
ConnReqJabberID | string | R | The value MUST be the value of the XMPP.Connection.{i}.JabberID contained in the XMPP.Connection instance referenced by the ConnReqXMPPConnection parameter. If the ConnReqXMPPConnection parameter is empty or the XMPP.Connection instance being reference is disabled, then this value will be empty. If the XMPP.Connection instance being referenced by the ConnReqXMPPConnection parameter is lost (XMPP.Connection.{i}.Status parameter changes from Enabled to some other value), then the value of this parameter MUST remain unchanged until the connection can be reestablished and a new XMPP.Connection.{i}.JabberID can be established. If the new XMPP.Connection.{i}.JabberID is identical to the existing value, then the value of this parameter MUST NOT be altered and a VALUE CHANGE event MUST NOT be generated. Active Notification MUST by default be enabled for this parameter. |
- | 2.7 |
HTTPCompressionSupported | string[] | R | Comma-separated list of strings. Indicates the HTTP Compression mechanism(s) supported by this CPE. Requirements for the use of HTTP Compression for CWMP can be found in [Section 3.4.7/TR-069]. Each list item is an enumeration of:
|
- | 2.7 |
HTTPCompression | string | W | The value MUST be a member of the list reported by the HTTPCompressionSupported parameter, or else be Disabled. The value of this parameter represents the HTTP Compression mechanism to be used by the CPE when communicating with the ACS. The factory default value MUST be Disabled. |
- | 2.7 |
LightweightNotificationProtocolsSupported | string[] | R | Comma-separated list of strings. Indicates the Lightweight Notification Protocol(s) supported by this CPE. Each list item is an enumeration of:
|
- | 2.7 |
LightweightNotificationProtocolsUsed | string[] | W | Comma-separated list of strings. Each list item MUST be a member of the list reported by the LightweightNotificationProtocolsSupported parameter, or else be an empty string. The value of this parameter represents the protocol(s) that will be used by the CPE when sending Lightweight Notifications. An empty string means that Lightweight Notifications are disabled, despite any SetParameterAttributes that have been configured on various parameters. | - | 2.7 |
LightweightNotificationTriggerInterval | unsignedInt(0:) | W | The duration in seconds of the interval for which the CPE MUST attempt to deliver any pending Passive Lightweight Notifications. A value of 0 means that the trigger interval is effectively disabled. In this case pending Passive Lightweight Notifications are only sent when triggered by an Active Lightweight Notification. | - | 2.12 |
LightweightNotificationTriggerTime | dateTime | W | An absolute time reference in UTC to determine when the CPE will initiate the Lightweight Notification (in the case that there are pending Passive Lightweight Notifications that need to be delivered). Each Passive Lightweight Notification (that is waiting for the Lightweight Notification Trigger mechanism for delivery) MUST occur at this reference time plus or minus an integer multiple of the LightweightNotificationTriggerInterval. LightweightNotificationTriggerTime is used only to set the phase of the Passive Lightweight Notification. The actual value of LightweightNotificationTriggerTime can be arbitrarily far into the past or future. For example, if LightweightNotificationTriggerInterval is 86400 (a day) and if LightweightNotificationTriggerTime is set to UTC midnight on some day (in the past, present, or future) then Lightweight Notifications for pending Passive Lightweight Notifications will occur every day at UTC midnight. These MUST begin on the very next midnight, even if LightweightNotificationTriggerTime refers to a day in the future. The Unknown Time value defined in [Section 3.2/TR-106] indicates that no particular time reference is specified. That is, the CPE MAY locally choose the time reference, and needs only to adhere to the specified LightweightNotificationTriggerInterval. If absolute time is not available to the CPE, its Lightweight Notifications behavior MUST be the same as if the LightweightNotificationTriggerTime parameter was set to the Unknown Time value. | - | 2.12 |
UDPLightweightNotificationHost | string(:256) | W | Host name or address to be used when sending the UDP Lightweight Notifications. UDPLightweightNotificationHost is only applicable when LightweightNotificationProtocolsUsed contains the UDP enumeration. If UDPLightweightNotificationHost is not implemented or is an empty string, and UDP Lightweight Notifications are supported, the destination host MUST be the same as the ACS (as contained in the host portion of the URL). | - | 2.7 |
UDPLightweightNotificationPort | unsignedInt | W | The port number to be used when sending UDP Lightweight Notifications. UDPLightweightNotificationPort is only applicable when LightweightNotificationProtocolsUsed contains the UDP enumeration. If UDPLightweightNotificationPort is not implemented and UDP Lightweight Notifications are supported, the destination port MUST be 7547. | - | 2.7 |
InstanceWildcardsSupported | boolean | R | Indicates whether or not instance wildcards are supported. A true value indicates that the CPE supports instance wildcards for GPV, GPN and GPA RPC calls, as defined in [TR-069]. | - | 2.12 |
InformParameterNumberOfEntries | unsignedInt | R | The number of entries in the InformParameter table. | - | 2.8 |
Device.ManagementServer.ManageableDevice.{i}. | object(0:) | R | Each entry in this table corresponds to a distinct LAN Device that supports Device-Gateway Association according to [Annex F/TR-069] as indicated by the presence of the DHCP option specified in that Annex. At most one entry in this table can exist with a given value for {{param: reference to obsoleted parameter Device.ManagementServer.ManageableDevice.{i}.Alias}}, or with the same values for all of ManufacturerOUI, SerialNumber and ProductClass. |
- | 2.0 |
Alias | string(:64) | W | A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. An initial unique value MUST be assigned when the CPE creates an instance of this object. This parameter was DEPRECATED because ManageableDevice is a transient object. This parameter is OBSOLETED in 2.14. | - | 2.0 |
ManufacturerOUI | string(6) | R | Organizationally unique identifier of the Device manufacturer as provided to the Gateway by the Device. Represented as a six hexadecimal-digit value using all upper-case letters and including any leading zeros. Possible patterns:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SerialNumber | string(:64) | R | Serial number of the Device as provided to the Gateway by the Device. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ProductClass | string(:64) | R | Identifier of the class of product for which the Device’s serial number applies as provided to the Gateway by the Device. If the Device does not provide a Product Class, then this parameter MUST be an empty string. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Host | string[](:1024) | R | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of a row in the Hosts.Host. table. If the referenced object is deleted, the corresponding item MUST be removed from the list. References all the Hosts.Host table entries, whether active or inactive, that correspond to this physical LAN device. There can be multiple such entries if the device has more than one network interface. For example: Device.Hosts.Host.1,Device.Hosts.Host.5 | - | 2.0 |
Device.ManagementServer.AutonomousTransferCompletePolicy. | object | R | This object allows configuration of CPE policy for notification of AUTONOMOUS TRANSFER COMPLETE events, defined in [TR-069]. The CPE policy determines the conditions under which the CPE notifies the ACS of the completion of file transfers that were not specifically requested by the ACS. | - | 2.0 |
Enable | boolean | W | Enable/disable CPE notification of AUTONOMOUS TRANSFER COMPLETE events to the ACS. | - | 2.0 |
TransferTypeFilter | string | W | Indicates the transfer types that MUST be included when the CPE notifies the ACS of AUTONOMOUS TRANSFER COMPLETE events. Transfer types not indicated by this filter MUST NOT be included when the CPE notifies the ACS. Enumeration of:
|
- | 2.0 |
ResultTypeFilter | string | W | Indicates the transfer results that MUST be included when the CPE notifies the ACS of AUTONOMOUS TRANSFER COMPLETE events. Transfer results omitted from this list MUST NOT be included when the CPE notifies the ACS. Note that this includes any backup or restore operations that were not specifically requested by the ACS. A backup is regarded as an Upload and a restore is regarded as a Download. Enumeration of:
|
- | 2.0 |
FileTypeFilter | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Indicates the file types that MUST be included when the CPE notifies the ACS of AUTONOMOUS TRANSFER COMPLETE events. File types omitted from this list MUST NOT be included when the CPE notifies the ACS. Each list item matches one of:
|
- | 2.0 |
Device.ManagementServer.DownloadAvailability. | object | R | This object contains multicast announcement and query parameters used for the purpose of downloading files. | - | 2.0 |
Device.ManagementServer.DownloadAvailability.Announcement. | object | R | This object contains multicast announcement parameters used to download files. | - | 2.0 |
Enable | boolean | W | Enable/disable CPE ability to receive and use multicast announcements from a server for the purpose of downloading files. | - | 2.0 |
Status | string | R | The status of the announcement service. Enumeration of:
|
- | 2.0 |
GroupNumberOfEntries | unsignedInt | R | The number of entries in the Group table. | - | 2.0 |
Device.ManagementServer.DownloadAvailability.Announcement.Group.{i}. | object(0:) | W | Multicast groups to which the CPE SHOULD listen for announcements. At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries. At most one enabled entry in this table can exist with a given value for URL. |
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
The Agent MUST choose an initial value that doesn’t conflict with any existing entries. Active Notification requests for this parameter MAY be denied. |
- | 2.3 |
Enable | boolean | W | Enable/disable listening to this multicast group. | false | 2.0 |
Status | string | R | The status of this group table entry. Enumeration of:
|
Disabled | 2.0 |
URL | string(:2048) | W | The [URL] encoding the group address, source and port on which to listen, and other protocol information, e.g. expected announcement format. Depending on the application, the messages identified by this URL MAY directly contain the data to be downloaded, or alternatively MAY contain information informing the CPE how to obtain the data to be downloaded via a separate mechanism, which itself could involve a unicast or a multicast download protocol. Refer to [DVB-TS.102.824] for an example of a URL format that identifies a SAP [RFC2974] stream that indicates how to use either FLUTE [RFC3926] or DSM-CC [ISO-13818-6:1998] to perform the download. | - | 2.0 |
Device.ManagementServer.DownloadAvailability.Query. | object | R | This object contains multicast query parameters used to download files. | - | 2.0 |
Enable | boolean | W | Enable/disable CPE ability to autonomously query a server for the purpose of downloading files. | - | 2.0 |
Status | string | R | The status of the query service. Enumeration of:
|
- | 2.0 |
URL | string(:2048) | W | The [URL] of the query response server. Depending on the application, the protocol described by this URL MAY be a SOAP interface, or MAY be any other RPC mechanism. Refer to [DVB-TS.102.824] for an example of a URL format that identifies a SOAP interface running over HTTP or HTTPS. | - | 2.0 |
Device.ManagementServer.DUStateChangeComplPolicy. | object | R | This object allows configuration of CPE policy for notification of “12 AUTONOMOUS DU STATE CHANGE COMPLETE” events defined in [TR-069]. The CPE policy determines the conditions under which the CPE notifies the ACS of the completion of Deployment Unit state changes that were not specifically requested via CWMP. | - | 2.1 |
Enable | boolean | W | Enables/Disables CPE notification of “12 AUTONOMOUS DU STATE CHANGE COMPLETE” events to the ACS. | - | 2.1 |
OperationTypeFilter | string[] | W | Comma-separated list of strings. Indicates the Deployment Unit operations that MUST be included when the CPE notifies the ACS of “12 AUTONOMOUS DU STATE CHANGE COMPLETE” events. Operation types not indicated by this list MUST NOT be included when the CPE notifies the ACS. An empty string is essentially the same as setting Enable to false. Each list item is an enumeration of:
|
- | 2.1 |
ResultTypeFilter | string | W | Indicates the Deployment Unit state change results that MUST be included when the CPE notifies the ACS of “12 AUTONOMOUS DU STATE CHANGE COMPLETE” events. State change results omitted from this filter MUST NOT be included when the CPE notifies the ACS. Enumeration of:
|
- | 2.1 |
FaultCodeFilter | string[] | W | Comma-separated list of strings. Indicates the Deployment Unit state change fault codes that MUST be included when the CPE notifies the ACS of “12 AUTONOMOUS DU STATE CHANGE COMPLETE” events. State change fault codes omitted from this filter MUST NOT be included when the CPE notifies the ACS. This filter has no effect on the notification of a successful autonomous state change. This filter only applies when ResultTypeFilter is set to either Failure or Both. An empty string means that failed autonomous state changes will not be sent to the ACS. Each list item is an enumeration of:
|
- | 2.1 |
Device.ManagementServer.EmbeddedDevice.{i}. | object(0:) | R | Each entry in this table represents a distinct Proxied Device that utilizes the Embedded Object Mechanism [Annex J.1.2/TR-069] for proxying devices. At most one entry in this table can exist with the same values for both ControllerID and ProxiedDeviceID. |
- | 2.3 |
ControllerID | string(:256) | R | Identifier of the controller that is responsible for a sub-network of Proxied Devices within the LAN.
An empty string indicates that this Proxied Device either:
|
- | 2.3 |
ProxiedDeviceID | string(:256) | R | Idenitfier of the Proxied Device. This is an opaque string that is unique to the Proxied Device within a specific sub-network within the LAN (identified by the ControllerID). If the ControllerID is an empty string this ProxiedDeviceID is unique across the LAN. | - | 2.3 |
Reference | string | R | The value MUST be the path name of a table row. If the referenced object is deleted, this EmbeddedDevice instance MUST also be removed. Represents the instance of a multi-instanced object that is directly controlled by, and has come into existence because of, this Proxied Device that utilizes the Embedded Object Mechanism [Annex J.1.2/TR-069]. | - | 2.3 |
SupportedDataModel | string[] | R | Comma-separated list of strings. Each list item MUST be the Path Name of a row in the DeviceInfo.SupportedDataModel. table. If the referenced object is deleted, the corresponding item MUST be removed from the list. Represents the CWMP-DT schema instance(s) that this Proxied Device is utilizing. The CWMP-DT schema instance is also the one being utilized by the object referenced within Reference. | - | 2.3 |
Host | string[:32]() | R | Comma-separated list (up to 32 items) (length ) of strings. Each list item MUST be the Path Name of a row in the Hosts.Host. table. If the referenced object is deleted, the corresponding item MUST be removed from the list. References the Hosts.Host table entry(s), whether active or inactive, that corresponds to this proxied LAN device. | - | 2.3 |
ProxyProtocol | string | R | The protocol being used to communicate between the CPE Proxier and this Proxied Device. Enumeration of:
|
- | 2.3 |
ProxyProtocolReference | string | R | The value MUST be the Path Name of a protocol object that uses the ProxyProtocol. | - | 2.6 |
DiscoveryProtocol | string[] | R | Comma-separated list of strings, that represents the discovery protocol(s) for this proxied device. Each list item is an enumeration of:
|
- | 2.6 |
DiscoveryProtocolReference | string[] | R | Comma-separated list of strings. Each list item MUST be the Path Name of an object discovered using one or more protocols listed in DiscoveryProtocol, or an empty string.
For objects discovered by the UPnP discovery protocol, the DiscoveryProtocolReference would contain items that are references to instances of the following:
|
- | 2.6 |
CommandProcessed | string | R | Whether or not the CPE Proxier has successfully communicated all pending configuration commands down to the Proxied Device. Enumeration of:
|
- | 2.3 |
CommandProcessingErrMsg | string(:1024) | R | Detailed CommandProcessed error description (vendor specific). | - | 2.3 |
LastSyncTime | dateTime | R | The last time that the CPE Proxier synchronized the state of the Proxied Device. This parameter MUST be updated when a proxy command is executed successfully on the Proxied Device. The Unknown Time value, as defined in [TR-106], indicates that the Proxied Device’s state has not been synchronized since the CPE Proxier was last rebooted. | - | 2.3 |
Device.ManagementServer.VirtualDevice.{i}. | object(0:) | R | Each entry in this table represents a distinct Proxied Device that utilizes the Virtual CWMP Device Mechanism [Annex I.1.1/TR-069] for proxying devices. At most one entry in this table can exist with the same values for all of ManufacturerOUI, ProductClass and SerialNumber. |
- | 2.3 |
ManufacturerOUI | string(6) | R | Organizationally unique identifier of the associated Proxied Device. Represented as a six hexadecimal-digit value using all upper-case letters and including any leading zeros. Possible patterns:
|
- | 2.3 |
ProductClass | string(:64) | R | Identifier of the class of product of the associated Proxied Device for which the serial number applies. | - | 2.3 |
SerialNumber | string(:64) | R | Serial number of the associated Proxied Device. | - | 2.3 |
Host | string[:32]() | R | Comma-separated list (up to 32 items) (length ) of strings. Each list item MUST be the Path Name of a row in the Hosts.Host. table. If the referenced object is deleted, the corresponding item MUST be removed from the list. References all the Hosts.Host table entries, whether active or inactive, that correspond to this proxied LAN device. There can be multiple such entries if the Proxied Device has more than one network interface. | - | 2.3 |
ProxyProtocol | string | R | The protocol being used to communicate between the CPE Proxier and this Proxied Device. Enumeration of:
|
- | 2.3 |
ProxyProtocolReference | string | R | The value MUST be the Path Name of a protocol object that uses the ProxyProtocol. | - | 2.6 |
DiscoveryProtocol | string[] | R | Comma-separated list of strings, that represents the discovery protocol(s) for this proxied device. Each list item is an enumeration of:
|
- | 2.6 |
DiscoveryProtocolReference | string[] | R | Comma-separated list of strings. Each list item MUST be the Path Name of an object discovered using one or more protocols listed in DiscoveryProtocol, or an empty string.
For objects discovered by the UPnP discovery protocol, the DiscoveryProtocolReference would contain items that are references to instances of the following:
|
- | 2.6 |
Device.ManagementServer.StandbyPolicy. | object | R | Parameters related to CPE behavior when waking up from standby. If this object is supported then the CPE MUST support the requirements of [Annex L/TR-069]. NOTE: “CR”, as used in the names and descriptions of the parameters defined in this object, refers to the Connection Request concept defined in TR-069. | - | 2.7 |
CRUnawarenessMaxDuration | int(-1:) | W | When waking up from a non CR-Aware Standby that lasted more than this parameter’s value (in seconds), the CPE MUST issue a WAKEUP Event. If the value is -1, the CPE MUST NOT ever issue WAKEUP Events for having been non CR-aware. The factory default value MUST be -1. |
- | 2.7 |
MaxMissedPeriodic | int(-1:) | W | When waking up from a non fully Timer-Aware Standby that made it miss more than this parameter’s value Periodic Contacts, the CPE MUST issue a WAKEUP Event. If the value is -1, the CPE MUST NOT ever issue WAKEUP Events for exceeding that limit. The factory default value MUST be -1. |
- | 2.7 |
NotifyMissedScheduled | boolean | W | When waking up from a non fully Timer-Aware Standby that made it miss at least one Scheduled Contact, the CPE MUST issue a WAKEUP Event if this parameter is true. The factory default value MUST be false. |
- | 2.7 |
NetworkAwarenessCapable | boolean | R | Indicates that the CPE is capable of CR-Aware Standby. | - | 2.7 |
SelfTimerCapable | boolean | R | Indicates that the CPE is capable of Timer-Aware Standby. | - | 2.7 |
CRAwarenessRequested | boolean | W | If NetworkAwarenessCapable and this parameter are both true, the CPE MUST NOT go into a non CR-Aware Standby state. The factory default value MUST be false. |
- | 2.7 |
PeriodicAwarenessRequested | boolean | W | If SelfTimerCapable and this parameter are both true, the CPE MUST NOT go into a standby state that prevents it from honoring Periodic Contacts. The factory default value MUST be false. |
- | 2.7 |
ScheduledAwarenessRequested | boolean | W | If this parameter is true, the CPE MUST NOT go into a standby state that prevents it from honoring Scheduled Contacts. This means that, whenever the ACS has requested a Scheduled Contact: *if SelfTimerCapable is true and the CPE chooses to go into Standby before the Scheduled Contact has been honored, it MUST use a Timer-Aware Standby; *if SelfTimerCapable is false, the CPE MUST NOT go into Standby before the Scheduled Contact has been honored. | - | 2.7 |
Device.ManagementServer.InformParameter.{i}. | object(0:) | W | This table provides the ACS with the ability to control the Parameters that are delivered by the Inform RPC. Any Parameter (identified by ParameterName) contained in this table MUST be included within the ParameterList argument of the Inform RPC whenever any Event within the EventList is being delivered. This table does not include Forced Inform Parameters, and Forced Inform Parameters are not allowed to be inserted into this table. Any attempt by an ACS to configure this table to contain a Forced Inform Parameter MUST result in the failure of the SetParameterValues RPC with error code 9007. At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries. At most one enabled entry in this table can exist with a given value for ParameterName. |
- | 2.8 |
Enable | boolean | W | Enables or disables this InformParameter. | false | 2.8 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
The Agent MUST choose an initial value that doesn’t conflict with any existing entries. |
- | 2.8 |
ParameterName | string(:256) | W | A pattern that describes the Parameter(s) to be included in the Inform’s ParameterList argument. Specifically, patterns with wildcards (an “*” character) in place of Instance Identifiers are allowed; any attempt to set the value otherwise MUST be rejected by the CPE. If the pattern does not match any existing Parameters at the time that the CPE is creating the Inform RPC, then this InformParameter instance is not included in the Inform’s ParameterList argument. | <Empty> | 2.8 |
EventList | string[] | W | Comma-separated list of strings. Each entry in this list represents an Event for which this Parameter MUST be included within the ParameterList argument of the Inform RPC. All Inform Events (see [Section 3.7.1.5/TR-069]), except for “4 VALUE CHANGE”, are allowed as entries in this list. “4 VALUE CHANGE” is not allowed as that would violate requirements contained in [Section A.3.3.1/TR-069]. An empty string means all events except “4 VALUE CHANGE”. | <Empty> | 2.8 |
Device.ManagementServer.HeartbeatPolicy. | object | R | Parameters related to CPE behavior in order to issue a Heartbeat event to the ACS using the Inform method call. If this object is supported then the CPE MUST support the requirements of [Annex O/TR-069]. | - | 2.12 |
Enable | boolean | W | When true, Heartbeat events are enabled to be sent to the ACS based on the values of the ReportingInterval and InitiationTime parameters. | - | 2.12 |
ReportingInterval | unsignedInt(30:) | W | The duration in seconds of the interval for which the CPE MUST attempt to connect with the ACS and call the Inform method if Enable is true. | - | 2.12 |
InitiationTime | dateTime | W | An absolute time reference in UTC to determine when the CPE will initiate the Heartbeat event Inform method calls. Each Inform call MUST occur at this reference time plus or minus an integer multiple of the ReportingInterval. InitiationTime is used only to set the phase of the Heartbeat event Informs. The actual value of InitiationTime can be arbitrarily far into the past or future. For example, if ReportingInterval is 60 (one minute) and if InitiationTime is set to UTC midnight on some day (in the past, present, or future) then Heartbeat Informs will occur every minute at the next UTC midnight. These MUST begin on the very next midnight, even if InitiationTime refers to a day in the future. The Unknown Time value defined in [Section 3.2/TR-106] indicates that no particular time reference is specified. The CPE MUST locally choose a random time reference. If absolute time is not available to the CPE, its Heartbeat Inform behavior MUST be the same as if the InitiationTime parameter was set to the Unknown Time value. | - | 2.12 |
Device.DeviceInfo.VendorConfigFile.{i}. | object(0:) | R | Every instance of this object is a Vendor Configuration File, and contains parameters associated with the Vendor Configuration File. This table of Vendor Configuration Files is for information only and does not allow the Controller to operate on these files in any way. Whenever the CPE successfully downloads a configuration file as a result of the Download RPC with the FileType argument of 3 Vendor Configuration File, the CPE MUST update this table. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | Name of the vendor configuration file. If the CPE is able to obtain the name of the configuration file from the file itself, then the value of this parameter MUST be set to that name. Otherwise, if the CPE can extract the file name from the URL used to download the configuration file, then the value of this parameter MUST be set to that name. Otherwise, the value of this parameter MUST be set to the value of the TargetFileName argument of the Download RPC used to download this configuration file. | - | 2.0 |
Version | string(:16) | R | A string identifying the configuration file version currently used in the CPE. If the CPE is able to obtain the version of the configuration file from the file itself, then the value of this parameter MUST be set to the obtained value. Otherwise, the value of this parameter MUST be an empty string. | - | 2.0 |
Date | dateTime | R | Date and time when the content of the current version of this vendor configuration file was first applied by the CPE. | - | 2.0 |
Description | string(:256) | R | A description of the vendor configuration file (human-readable string). | - | 2.0 |
UseForBackupRestore | boolean | R | When true, this parameter indicates that this VendorConfigFile instance is to be used for backup and restoration purposes. Note: The backup and restore operations may require the use of multiple VendorConfigFile instances. In this scenario the mechanism for detemining the order and combination of VendorConfigFile instances used for backup and restoration purposes is implementation specific. | - | 2.7 |
Device.DeviceInfo.MemoryStatus. | object | R | Status of the device’s volatile physical memory. | - | 2.0 |
Total | unsignedInt | R | The total physical RAM, in kilobytes, installed on the device. | - | 2.0 |
Free | unsignedInt | R | The free physical RAM, in kilobytes, currently available on the device. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DeviceInfo.ProcessStatus. | object | R | Status of the processes on the device. | - | 2.0 |
CPUUsage | unsignedInt(:100) | R | The total amount of the CPU, in percent, rounded up to the nearest whole percent. In the case that multiple CPU are present, this value represents the average of all CPU. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ProcessNumberOfEntries | unsignedInt | R | The number of entries in the Process table. Since a Process can come and go very quickly, the CPE SHOULD place a locally specified limit on the frequency at which it will notify the ACS of value changes, as described in [Section 3.2.1/TR-069]. |
- | 2.0 |
Device.DeviceInfo.ProcessStatus.Process.{i}. | object(0:) | R | List of all processes running on the device. At most one entry in this table can exist with a given value for PID. |
- | 2.0 |
PID | unsignedInt | R | The Process Identifier. | - | 2.0 |
Command | string(:256) | R | The name of the command that has caused the process to exist. | - | 2.0 |
Size | unsignedInt | R | The size in kilobytes of the memory occupied by the process. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Priority | unsignedInt(:99) | R | The priority of the process where 0 is highest. | - | 2.0 |
CPUTime | unsignedInt | R | The amount of time in milliseconds that the process has spent taking up CPU time since the process was started. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
State | string | R | The current state that the process is in. Enumeration of:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DeviceInfo.TemperatureStatus. | object | R | Status of the temperature of the device. | - | 2.0 |
TemperatureSensorNumberOfEntries | unsignedInt | R | The number of entries in the TemperatureSensor table. | - | 2.0 |
Device.DeviceInfo.TemperatureStatus.TemperatureSensor.{i}. | object(0:) | R | This object represents information that the device has obtained via sampling an internal temperature sensor. At most one entry in this table can exist with a given value for Name, or with a given value for Alias. |
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.3 |
Enable | boolean | W | Indicates whether or not the temperature sensor is enabled. | - | 2.0 |
Status | string | R | The status of this temperature sensor. Enumeration of:
|
- | 2.0 |
Reset | boolean | W | When set to true, resets the temperature sensor. | - | 2.0 |
ResetTime | dateTime | R | The time at which this temperature sensor was reset.
Reset can be caused by:
|
- | 2.0 |
Name | string(:256) | R | Name of this temperature sensor. This text MUST be sufficient to distinguish this temperature sensor from other temperature sensors. | - | 2.0 |
Value | int(-274:) | R | This temperature sensor’s last good reading in degrees celsius. A value of -274 (which is below absolute zero) indicates a good reading has not been obtained since last reset. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LastUpdate | dateTime | R | The time at which this temperature sensor’s last good reading was obtained. The Unknown Time value, as defined in [TR-106], indicates a good reading has not been obtained since last reset. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MinValue | int(-274:) | R | This temperature sensor’s lowest value reading in degrees celsius since last reset. A value of -274 (which is below absolute zero) indicates a good reading has not been obtained since last reset. | - | 2.0 |
MinTime | dateTime | R | The time at which this temperature sensor’s lowest value was read. The Unknown Time value, as defined in [TR-106], indicates a good reading has not been obtained since last reset. | - | 2.0 |
MaxValue | int(-274:) | R | This temperature sensor’s highest value reading in degrees celsius since last reset. A value of -274 (which is below absolute zero) indicates a good reading has not been obtained since last reset. | - | 2.0 |
MaxTime | dateTime | R | The time at which this temperature sensor’s highest value was read. The Unknown Time value, as defined in [TR-106], indicates a good reading has not been obtained since last reset. | - | 2.0 |
LowAlarmValue | int(-274:) | W | This temperature sensor’s low alarm value in degrees celsius. A value of -274 (which is below absolute zero) indicates a non configured value. A change to this value will cause LowAlarmTime to be reset. | - | 2.0 |
LowAlarmTime | dateTime | R | Initial time at which this temperature sensor’s LowAlarmValue was encountered. This value is only set the first time the alarm is seen and not changed until the next reset. The Unknown Time value, as defined in [TR-106], indicates that an alarm has not been encountered since the last reset. | - | 2.0 |
HighAlarmValue | int(-274:) | W | This temperature sensor’s high alarm value in degrees celsius. A value of -274 (which is below absolute zero) indicates a non configured value. A change to this value will cause HighAlarmTime to be reset. | - | 2.0 |
PollingInterval | unsignedInt | W | The interval, measured in seconds, in which the device polls this TemperatureSensor. If the value is 0 then the device selects its own polling interval. If the value is greater than 0 then the device MUST use this value as the polling interval. | - | 2.1 |
HighAlarmTime | dateTime | R | Initial time at which this temperature sensor’s HighAlarmValue was encountered. This value is only set the first time the alarm is seen and not changed until the next reset. The Unknown Time value, as defined in [TR-106], indicates that an alarm has not been encountered since the last reset. | - | 2.0 |
Device.DeviceInfo.NetworkProperties. | object | R | This object defines the parameters that describe how the device handles network traffic. | - | 2.0 |
MaxTCPWindowSize | unsignedInt | R | The maximum number of bytes of outstanding data a sender can send on a particular connection prior to an acknowledgment [RFC793]. Any scaling factor SHOULD be included in this parameter [RFC1323]. | - | 2.0 |
TCPImplementation | string[] | R | Comma-separated list of strings. Indicates the TCP congestion control mechanism(s) implemented. Each list item is an enumeration of:
|
- | 2.0 |
Device.DeviceInfo.Processor.{i}. | object(0:) | R | Each table entry represents a hardware or virtual processor that resides on this device. At most one entry in this table can exist with a given value for Alias. |
- | 2.1 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.3 |
Architecture | string | R | The architecture of the processor on the underlying hardware. Enumeration of:
|
- | 2.1 |
Device.DeviceInfo.VendorLogFile.{i}. | object(0:) | R | Each table entry represents a Vendor Log File. This table of log files is informational only and does not allow the Controller to operate on these files in any way. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.1 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.1 |
Name | string(:64) | R | Name of the log file. Typically this will be the full file system path, but provided that it is guaranteed to be unique across current and future log files, it MAY be a shorter name derived from the file system path, or be derived via another mechanism. | - | 2.1 |
MaximumSize | unsignedInt | R | The maximum size of the log file in bytes. If the device doesn’t know the maximum file size then MaximumSize will be 0. | - | 2.1 |
Persistent | boolean | R | When true, the log file contents are preserved across a device reboot. When false, the log file contents will be purged when the device is rebooted. | - | 2.1 |
Device.DeviceInfo.Location.{i}. | object(0:) | W | This object contains Location information. At most one entry in this table can exist with the same values for both Source and ExternalSource. On creation of a new table entry, the Agent MUST choose an initial value for ExternalSource such that the new entry does not conflict with any existing entries. |
- | 2.4 |
Source | string | R | Identifies the source of the location data. Enumeration of:
|
External | 2.4 |
AcquiredTime | dateTime | R | The time when the location was acquired. | - | 2.4 |
ExternalSource | string | R | URL, MAC address, or other identifier that identifies an “External” source of this location. Meaningful only if Source has a value of External, otherwise it MUST be an empty string. If ExternalProtocol has a value of CWMP, this is the URL or IP address of the Controller. The Agent MUST choose an initial value that doesn’t conflict with any existing entries. |
- | 2.4 |
ExternalProtocol | string | R | Protocol used to acquire a location from an “External” source. Enumeration of: |
CWMP | 2.4 |
DataObject | string(:1200) | W | The currently valid location information. Writable only when ExternalProtocol has a value of CWMP or USP. If obtained through the local GPS/AGPS then the location information is formatted according to [RFC5491]. If manually configured then location information will be XML-formatted according to [RFC5491] (geographical information) and [RFC5139] (civic addresses). If obtained by an external source this is the location information as received. If it’s an XML document (e.g. CWMP, OMA-DM, UPnP, HELD, MLP) the location information will be represented as-is, otherwise it will be converted to base64. CWMP or USP configured location information will be XML-formatted according to [RFC5491] (geographical information) and [RFC5139] (civic addresses). Only zero or one Location object instance with value CWMP or USP MUST exist at any given time. | - | 2.4 |
Device.DeviceInfo.DeviceImageFile.{i}. | object(0:) | R | This object describes an image of the device. At most one entry in this table can exist with a given value for Location, or with a given value for Alias. |
- | 2.11 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
Location | string | R | The location of the device that represents the image as the user looks at the front of the device in its typical orientation (e.g., on-end, flat). Enumeration of:
|
- | 2.11 |
Image | base64 | R | The device image in PNG, JPEG or GIF format. | - | 2.11 |
Device.DeviceInfo.FirmwareImage.{i}. | object(0:) | R | Top-level object for mapping firmware images. This is a static table – the number of object instances in this table is defined by the firmware that is currently running. At most one entry in this table can exist with a given value for Alias. |
- | 2.12 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
|
- | 2.12 |
Name | string(:64) | R | Firmware/software image name. Descriptive text of the image or filename. The value of Name is an empty string if Status is anything other than Available, InstallationFailed, or ActivationFailed. | - | 2.12 |
Version | string(:64) | R | A string identifying the version of the firmware image represented by this FirmwareImage. Whenever this firmware image is active (ie, the device has booted this firmware image), the value of the DeviceInfo.SoftwareVersion parameter MUST be the same as the value contained in this parameter. To allow version comparisons, this element SHOULD be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 3.0.21 where the components mean: Major.Minor.Build. The value of Version is an empty string if Status is anything other than Available, InstallationFailed, or ActivationFailed. | - | 2.12 |
Available | boolean | W | Specifies whether or not this particular firmware image can be used by the Agent. An Agent will only attempt to boot this particular firmware image if this parameter value is set to true. This value MUST be set to true by the device whenever a new firmware image is installed. This value cannot be set to false if the firmware image is active or is referenced by the BootFirmwareImage parameter. Firmware image instances cannot be deleted, so a Controller MAY use this parameter to subsequently mark a particular firmware as being invalid, which will prevent the Agent from attempting to boot it. | - | 2.12 |
Status | string | R | Status of the firmware image, as determined by the Agent. Enumeration of:
|
- | 2.12 |
BootFailureLog | string | R | If the Agent is unable to boot into this firmware image, when specified, the Agent can use this parameter to record some information as to why the boot failed. If the Agent successfully boots into this firmware, the value of this parameter SHOULD be an empty string. When a new firmware image is installed into this object instance, this parameter MUST be cleared. The length of this string is defined as implementation-specific by the Agent. | - | 2.12 |
Device.DeviceInfo.SupportedDataModel.{i}. | object(0:) | R | This table contains details of the device’s Current Supported Data Model. The table MUST describe the device’s entire Supported Data Model. Therefore, if a device’s Supported Data Model changes at run-time, entries will need to be added or removed as appropriate. Each table entry MUST refer to only a single Root Object or Service Object. The device MAY choose to use more than one table entry for a given Root Object or Service Object. Considering that every device has some form of a data model, this table MUST NOT be empty. At most one entry in this table can exist with a given value for URL, or with a given value for Alias, or with a given value for UUID. |
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.3 |
URL | string(:2048) | R | The [URL] that describes some or all of the device’s currently Supported Data Model. The URL MUST reference an XML file which describes the appropriate part of the Supported Data Model. The referenced XML file MUST be compliant with the DT (Device Type) Schema that is described in [Annex B/TR-106], including any additional normative requirements referenced within the Schema. The XML file referenced by this URL MUST NOT change while the CPE is running, and SHOULD NOT change across a CPE reboot. Note that UUID is a unique key, so the XML file referenced by this URL will never change. The XML file MAY be located within the CPE. In this scenario the CPE MAY use the value of “localhost” as URL host portion, When the “localhost” value is used, the ACS has the responsibility to substitute the “localhost” value with the host portion of the connection request URL. Behavior in the event of an invalid URL, failure to access the referenced XML file, or an invalid XML file, is implementation-dependent. | - | 2.0 |
UUID | string(36) | R | [UUID] UUID ([RFC4122]) that is the value of the uuid attribute in the DT Instance referenced by URL. | - | 2.6 |
URN | string(:256) | R | URN ([RFC3986]) that is the value of the spec attribute in the DM (data model) Instance that defines the Root Object or Service Object referenced by this table entry. For example, if this table entry references a DT Instance that refers to the Device:2.13 Root Object, the value of this parameter would be urn:broadband-forum-org:tr-181-2-13-0. If the DT Instance instead referred to a vendor-specific Root Object, e.g. X_EXAMPLE_Device:1.0 (derived from Device:1.3), the value of this parameter would be something like urn:example-com:device-1-0-0. | - | 2.0 |
Features | string[] | R | Comma-separated list of strings. This parameter MUST list exactly the features that are defined using the top-level feature element in the DT Instance referenced by URL. For example, if the DT instance specified the following: then the value of this parameter might be DNSServer,Router,X_MyDeviceFeature. The order in which the features are listed is not significant. |
- | 2.0 |
Device.DeviceInfo.ProxierInfo. | object | R | Represents the associated CPE Proxier for a Proxied Device that utilizes the Virtual CWMP Device Mechanism [Annex J.1.1/TR-069]. | - | 2.3 |
ManufacturerOUI | string(6) | R | Organizationally unique identifier of the associated CPE Proxier. Represented as a six hexadecimal-digit value using all upper-case letters and including any leading zeros. Possible patterns:
|
- | 2.3 |
ProductClass | string(:64) | R | Identifier of the class of product of the associated CPE Proxier for which the serial number applies. An empty string indicates either that the CPE Proxier does not use a product class to differentiate its serial number. | - | 2.3 |
SerialNumber | string(:64) | R | Serial number of the associated CPE Proxier. | - | 2.3 |
ProxyProtocol | string | R | The protocol being used to communicate between the CPE Proxier and this Proxied Device. Enumeration of:
|
- | 2.3 |
Device.Time. | object | R | This object contains parameters relating an NTP or SNTP time client in the CPE. | - | 2.0 |
Enable | boolean | W | Enables or disables the NTP or SNTP time client. | - | 2.0 |
Status | string | R | Status of Time support on the CPE. Enumeration of:
|
- | 2.0 |
NTPServer1 | string(:64) | W | First NTP timeserver. Either a host name or IP address. | - | 2.0 |
NTPServer2 | string(:64) | W | Second NTP timeserver. Either a host name or IP address. | - | 2.0 |
NTPServer3 | string(:64) | W | Third NTP timeserver. Either a host name or IP address. | - | 2.0 |
NTPServer4 | string(:64) | W | Fourth NTP timeserver. Either a host name or IP address. | - | 2.0 |
NTPServer5 | string(:64) | W | Fifth NTP timeserver. Either a host name or IP address. | - | 2.0 |
CurrentLocalTime | dateTime | R | The current date and time in the CPE’s local time zone. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LocalTimeZone | string(:256) | W | The local time zone definition, encoded according to IEEE 1003.1 (POSIX). The following is an example value: EST+5 EDT,M4.1.0/2,M10.5.0/2 |
- | 2.0 |
Device.UserInterface. | object | R | This object contains parameters relating to the user interface of the CPE. | - | 2.0 |
Enable | boolean | W | Enables and disables the CPE’s user interface. The factory default value MUST be true. |
- | 2.11 |
PasswordRequired | boolean | W | Present only if the CPE provides a password-protected LAN-side user interface. Indicates whether or not the local user interface MUST require a password to be chosen by the user. If false, the choice of whether or not a password is used is left to the user. | - | 2.0 |
PasswordUserSelectable | boolean | W | Present only if the CPE provides a password-protected LAN-side user interface and supports LAN-side Auto-Configuration. Indicates whether or not a password to protect the local user interface of the CPE MAY be selected by the user directly (i.e. Users.User.{i}.Password), or MUST be equal to the password used by the LAN-side Auto-Configuration protocol (i.e. LANConfigSecurity.ConfigPassword). | - | 2.0 |
PasswordReset | boolean | W | Present only if the CPE provides a password-protected LAN-side user interface and supports LAN-side Auto-Configuration. When set to true, resets LANConfigSecurity.ConfigPassword to its factory value. | - | 2.0 |
UpgradeAvailable | boolean | W | Indicates that a CPE upgrade is available, allowing the CPE to display this information to the user. | - | 2.0 |
WarrantyDate | dateTime | W | Indicates the date and time in UTC that the warranty associated with the CPE is to expire. | - | 2.0 |
ISPName | string(:64) | W | The name of the customer’s ISP. | - | 2.0 |
ISPHelpDesk | string(:32) | W | The help desk phone number of the ISP. | - | 2.0 |
ISPHomePage | string(:2048) | W | The [URL] of the ISP’s home page. | - | 2.0 |
ISPHelpPage | string(:2048) | W | The [URL] of the ISP’s on-line support page. | - | 2.0 |
ISPLogo | base64(0:4095) | W | Base64 encoded GIF or JPEG image. The binary image is constrained to 4095 bytes or less. | - | 2.0 |
ISPLogoSize | unsignedInt(0:4095) | W | Un-encoded binary image size in bytes. If ISPLogoSize input value is 0 then the ISPLogo is cleared. ISPLogoSize can also be used as a check to verify correct transfer and conversion of Base64 string to image size. | - | 2.0 |
ISPMailServer | string(:2048) | W | The [URL] of the ISP’s mail server. | - | 2.0 |
ISPNewsServer | string(:2048) | W | The [URL] of the ISP’s news server. | - | 2.0 |
TextColor | hexBinary(3) | W | The color of text on the GUI screens in RGB hexadecimal notation (e.g., FF0088). | - | 2.0 |
BackgroundColor | hexBinary(3) | W | The color of the GUI screen backgrounds in RGB hexadecimal notation (e.g., FF0088). | - | 2.0 |
ButtonColor | hexBinary(3) | W | The color of buttons on the GUI screens in RGB hexadecimal notation (e.g., FF0088). | - | 2.0 |
ButtonTextColor | hexBinary(3) | W | The color of text on buttons on the GUI screens in RGB hexadecimal notation (e.g., FF0088). | - | 2.0 |
AutoUpdateServer | string(:256) | W | The server the CPE can check to see if an update is available for direct download to it. This MUST NOT be used by the CPE if the ManagementServer.UpgradesManaged parameter is true. |
- | 2.0 |
UserUpdateServer | string(:256) | W | The server where a user can check via a web browser if an update is available for download to a PC. This MUST NOT be used by the CPE if the ManagementServer.UpgradesManaged parameter is true. |
- | 2.0 |
AvailableLanguages | string[](:256) | R | Comma-separated list (maximum number of characters 256) of strings. List items represent user-interface languages that are available, where each language is specified according to [RFC3066]. | - | 2.0 |
CurrentLanguage | string(:16) | W | Current user-interface language, specified according to [RFC3066]. The value MUST be a member of the list reported by the AvailableLanguages parameter. | - | 2.0 |
Device.UserInterface.RemoteAccess. | object | R | This object contains parameters relating to remotely accessing the CPE’s user interface. Remote access is defined as any entity not of a local subnet attempting to connect to the CPE. Remote access requires user authentication. To provide remote access authentication the CPE MUST support a “User” table with at least one instance that has “RemoteAccessCapable” set to true. | - | 2.0 |
Enable | boolean | W | Enables/Disables remotely accessing the CPE’s user interface. | - | 2.0 |
Port | unsignedInt(:65535) | W | Destination TCP port required for remote access connection. | - | 2.0 |
SupportedProtocols | string[] | R | Comma-separated list of strings. Indicates the protocols that are supported by the CPE for the purpose of remotely accessing the user interface. Each list item is an enumeration of: |
- | 2.0 |
Protocol | string | W | The value MUST be a member of the list reported by the SupportedProtocols parameter. This is the protocol currently being used for remote access. | - | 2.0 |
Device.UserInterface.LocalDisplay. | object | R | This object describes how to remotely manage the initial positioning of a user interface on a device’s local display. | - | 2.0 |
Movable | boolean | W | Controls whether the user is allowed to change the GUI window position on the local CPE’s display. | - | 2.0 |
Resizable | boolean | W | Controls whether the user is allowed to resize the GUI window on the local CPE’s display. | - | 2.0 |
PosX | int | W | The horizontal position of the User Interface’s top left corner within the local CPE’s display measured from the top left corner, expressed in pixels. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PosY | int | W | The vertical position of the User Interface’s top left corner within the local CPE’s display measured from the top left corner, expressed in pixels. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Width | unsignedInt | W | The width of the user interface within the local CPE’s display, expressed in pixels. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Height | unsignedInt | W | The height of the user interface within the local CPE’s display, expressed in pixels. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DisplayWidth | unsignedInt | R | The width of the local CPE’s display, expressed in pixels. | - | 2.0 |
DisplayHeight | unsignedInt | R | The height of the local CPE’s display, expressed in pixels. | - | 2.0 |
Device.UserInterface.Messages. | object | R | Definition of user information message displays. | - | 2.11 |
Enable | boolean | W | Enables and displays the user information message. The factory default value MUST be true. |
- | 2.11 |
Title | string(:128) | W | Message title to be displayed. | - | 2.11 |
SubTitle | string(:128) | W | Message sub title to be displayed. | - | 2.11 |
Text | string | W | Message text. | - | 2.11 |
IconType | string | W | Icon to be displayed. Enumeration of:
|
- | 2.11 |
MessageColor | hexBinary(3) | W | The color of message text in RGB hexadecimal notation (e.g., FF0088). | - | 2.11 |
BackgroundColor | hexBinary(3) | W | The color of the message screen background in RGB hexadecimal notation (e.g., FF0088). | - | 2.11 |
TitleColor | hexBinary(3) | W | The color of the message title in RGB hexadecimal notation (e.g., FF0088). | - | 2.11 |
SubTitleColor | hexBinary(3) | W | The color of the sub title in RGB hexadecimal notation (e.g., FF0088). | - | 2.11 |
RequestedNumberOfRepetitions | unsignedInt | W | The number of times the device SHOULD repeat the message. | - | 2.11 |
ExecutedNumberOfRepetitions | unsignedInt | R | The number of times the device repeated the message. | - | 2.11 |
Device.InterfaceStack.{i}. | object(0:) | R | This table contains information about the relationships between the multiple layers of interface objects ([Section 4.3/TR-181i2]). In particular, it contains information on which interfaces run on top of which other interfaces. This table is auto-generated by the CPE based on the LowerLayers parameters on individual interface objects. Each table row represents a “link” between two interface objects, a higher-layer interface object (referenced by HigherLayer) and a lower-layer interface object (referenced by LowerLayer). Consequently, if a referenced interface object is deleted, the CPE MUST delete the corresponding InterfaceStack row(s) that had referenced it. At most one entry in this table can exist with the same values for both HigherLayer and LowerLayer, or with a given value for Alias. |
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.3 |
HigherLayer | string(:256) | R | A reference to the interface object corresponding to the higher layer of the relationship, i.e. the interface which runs on top of the interface identified by the corresponding instance of LowerLayer. When the referenced higher layer interface is deleted, the CPE MUST delete the table row. | - | 2.0 |
LowerLayer | string(:256) | R | A reference to the interface object corresponding to the lower layer of the relationship, i.e. the interface which runs below the interface identified by the corresponding instance of HigherLayer. When the referenced lower layer interface is deleted, the CPE MUST delete the table row. | - | 2.0 |
HigherAlias | string(:64) | R | The value of the Alias parameter for the interface object referenced by HigherLayer. | - | 2.0 |
LowerAlias | string(:64) | R | The value of the Alias parameter for the interface object referenced by LowerLayer. | - | 2.0 |
Device.DSL. | object | R | This object models DSL lines, DSL channels, DSL bonding, and DSL diagnostics. The specific interface objects defined here are Line, Channel, and BondingGroup. Each Line models a layer 1 DSL Line interface, and each Channel models a layer 1 DSL Channel interface where multiple channels can run over a DSL line. In the case where bonding is configured, it is expected that BondingGroup is stacked above the Channel instances within its group. | - | 2.0 |
LineNumberOfEntries | unsignedInt | R | The number of entries in the Line table. | - | 2.0 |
ChannelNumberOfEntries | unsignedInt | R | The number of entries in the Channel table. | - | 2.0 |
BondingGroupNumberOfEntries | unsignedInt | R | The number of entries in the BondingGroup table. | - | 2.0 |
Device.DSL.Line.{i}. | object(0:) | R | DSL Line table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models physical DSL lines. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.0 |
Enable | boolean | W | Enables or disables the DSL line. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.0 |
EnableDataGathering | boolean | W | Enables or disables data gathering on the DSL line. | - | 2.8 |
Status | string | R | The current operational state of the DSL line (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the DSL line as assigned by the CPE. | - | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the DSL line entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Line is a layer 1 interface, it is expected that LowerLayers will not be used. | - | 2.0 |
Upstream | boolean | R | Indicates whether the interface points towards the Internet (true) or towards End Devices (false).
For example:
|
- | 2.0 |
FirmwareVersion | string(:64) | R | A string identifying the version of the modem firmware currently installed for this interface. This is applicable only when the modem firmware is separable from the overall CPE software. | - | 2.0 |
LinkStatus | string | R | Status of the DSL physical link. Enumeration of:
|
- | 2.0 |
StandardsSupported | string[] | R | Comma-separated list of strings. List items indicate which DSL standards and recommendations are supported by the Line instance. Each list item is an enumeration of:
|
- | 2.0 |
XTSE | hexBinary(8) | R | This configuration parameter defines the transmission system types to be allowed by the xTU on this Line instance. Each bit is 0 if not allowed or 1 if allowed, as defined for the xTU transmission system enabling (XTSE) in ITU-T G.997.1. Note: This parameter is defined as xDSL Transmission system enabling (XTSE) in ITU-T G.997.1. For a full definition, see Clause 7.3.1.1.1 of ITU-T Recommendation [G.997.1]. | - | 2.8 |
StandardUsed | string | R | The value MUST be a member of the list reported by the StandardsSupported parameter. Indicates the standard that the Line instance is using for the connection. Note: In G.997.1, this parameter is called “xDSL Transmission system”. See ITU-T Recommendation [G.997.1]. This parameter was DEPRECATED because its entries are out-of-date; XTSE points to a current list. Therefore its value MAY be an empty string if (and only if) XTSUsed is supported. This parameter is OBSOLETED in 2.14. | - | 2.0 |
XTSUsed | hexBinary(8) | R | This parameter indicates which DSL standard and recommendation are currently in use by the Line instance. Only one bit is set, as defined for the xTU transmission system enabling (XTSE) in ITU-T G.997.1. | - | 2.8 |
LineEncoding | string | R | The line encoding method used in establishing the Layer 1 DSL connection between the CPE and the DSLAM. Enumeration of:
|
- | 2.0 |
AllowedProfiles | string[] | R | Comma-separated list of strings. List items indicate which VDSL2 profiles are allowed on the line. Each list item is an enumeration of:
|
- | 2.0 |
CurrentProfile | string | R | The value MUST be a member of the list reported by the AllowedProfiles parameter, or else be an empty string. Indicates which VDSL2 profile is currently in use on the line. Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be an empty string. | - | 2.0 |
PowerManagementState | string | R | The power management state of the line. Enumeration of:
|
- | 2.0 |
SuccessFailureCause | unsignedInt(0:6) | R | The success failure cause of the initialization. An enumeration of the following integer values:
|
- | 2.0 |
UPBOKLER | unsignedInt(0:1280) | R | This parameter contains the estimated electrical loop length estimated by the VTU-R expressed in 0.1 dB at 1MHz (see O-UPDATE in section 12.2.4.2.1.2/G.993.2). The value is coded as an unsignedInt in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Note: This parameter is defined as UPBOKLE-R in Clause 7.5.1.23.2 of ITU-T Recommendation [G.997.1]. | - | 2.8 |
UPBOKLEPb | unsignedInt(0:1280,2047)[] | R | Comma-separated list of unsigned integers (0 to 1280, or 2047). VTU-O estimated upstream power back-off electrical length per band. This parameter is a vector of UPBO electrical length per-band estimates for each supported downstream band, expressed in 0.1 dB at 1 MHz (kl0) calculated by the VTU-R, based on separate measurements in the supported upstream bands. The value of each list element ranges from 0 to 128 dB in steps of 0.1 dB, with special value 204.7 which indicates that the estimate is greater than 128 dB. This parameter is required for the alternative electrical length estimation method (ELE-M1). Note: This parameter is defined as UPBOKLE-pb in Clause 7.5.1.23.3 of ITU-T Recommendation [G.997.1]. | - | 2.8 |
UPBOKLERPb | unsignedInt(0:1280,2047)[] | R | Comma-separated list of unsigned integers (0 to 1280, or 2047). VTU-R estimated upstream power back-off electrical length per band. This parameter is a vector of UPBO electrical length per-band estimates for each supported downstream band, expressed in 0.1 dB at 1 MHz (kl0) calculated by the VTU-R, based on separate measurements in the supported downstream bands. The value of each list element ranges from 0 to 128 dB in steps of 0.1 dB, with special value 204.7 which indicates that the estimate is greater than 128 dB. This parameter is required for the alternative electrical length estimation method (ELE-M1). The value of each list element is coded as an unsigned 16 bit number in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Note: This parameter is defined as UPBOKLE-R-pb in Clause 7.5.1.23.4 of ITU-T Recommendation [G.997.1]. | - | 2.8 |
RXTHRSHds | int(-640:0) | R | UPBO downstream receiver signal level threshold. This parameter reports the downstream received signal level threshold value used in the alternative electrical length estimation method (ELE-M1). This parameter represents an offset from -100 dBm/Hz, and ranges from -64 dB to 0 dB in steps of 0.1 dB. The value is coded as a 16 bit number in the range -64 (coded as -640) to 0 dB (coded as 0) in steps of 0.1 dB. Note: See ITU-T Recommendation [G.997.1]. | - | 2.8 |
ACTRAMODEds | unsignedInt(1:4) | R | This parameter indicates the actual active rate adaptation mode in the downstream direction.
|
- | 2.8 |
ACTRAMODEus | unsignedInt(1:4) | R | This parameter indicates the actual active rate adaptation mode in the upstream direction.
|
- | 2.8 |
ACTINPROCds | unsignedInt | R | This parameter reports the actual impulse noise protection (INP) of the robust overhead channel (ROC) in the downstream direction. The format and usage is identical to the channel status parameter Channel.{i}.ACTINP. Note: This parameter is defined as ACTINP-ROC-ds in Clause 7.5.1.34.1 of ITU-T Recommendation [G.997.1]. | - | 2.8 |
ACTINPROCus | unsignedInt | R | This parameter reports the actual impulse noise protection (INP) of the robust overhead channel (ROC) in the upstream direction. The format and usage is identical to the channel status parameter Channel.{i}.ACTINP. Note: This parameter is defined as ACTINP-ROC-us in Clause 7.5.1.34.2 ITU-T Recommendation [G.997.1]. | - | 2.8 |
SNRMROCds | unsignedInt | R | This parameter reports the actual signal-to-noise margin of the robust overhead channel (ROC) in the downstream direction (expressed in 0.1 dB). The format is identical to the format of the line status parameter SNRM margin DownstreamNoiseMargin. Note: This parameter is defined as SNRM-ROC-ds in Clause 7.5.1.35.1 ITU-T Recommendation [G.997.1]. | - | 2.8 |
SNRMROCus | unsignedInt | R | This parameter reports the actual signal-to-noise margin of the robust overhead channel (ROC) in the upstream direction (expressed in 0.1 dB). The format is identical to the format of the line status parameter SNRM margin (UpstreamNoiseMargin). Note: This parameter is defined as SNRM-ROC-us in Clause 7.5.1.35.2 ITU-T Recommendation [G.997.1]. | - | 2.8 |
LastStateTransmittedDownstream | unsignedInt | R | This parameter represents the last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line. Initialization states are defined in the individual xDSL Recommendations and are counted from 0 (if G.994.1 is used) or 1 (if G.994.1 is not used) up to Showtime. This parameter needs to be interpreted along with the xDSL Transmission System. This parameter is available only when, after a failed full initialization, the line diagnostics procedures are activated on the line. Note: See ITU-T Recommendation [G.997.1]. | - | 2.0 |
LastStateTransmittedUpstream | unsignedInt | R | This parameter represents the last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line. Initialization states are defined in the individual xDSL Recommendations and are counted from 0 (if G.994.1 is used) or 1 (if G.994.1 is not used) up to Showtime. This parameter needs to be interpreted along with the xDSL Transmission System. This parameter is available only when, after a failed full initialization, the line diagnostics procedures are activated on the line. Note: See ITU-T Recommendation [G.997.1]. | - | 2.0 |
UPBOKLE | unsignedInt(0:1280) | R | This parameter contains the estimated electrical loop length expressed in 0.1dB at 1MHz (see O-UPDATE in section 12.2.4.2.1.2/G.993.2). The value SHALL be coded as an unsigned 16 bit number in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Note: See ITU-T Recommendation [G.997.1]. | - | 2.0 |
MREFPSDds | base64(0:145) | R | This parameter SHALL contain the set of breakpoints exchanged in the MREFPSDds fields of the O-PRM message of G.993.2. Base64 encoded of the binary representation defined in Table 12-19/G.993.2 (maximum length is 145 octets, which requires 196 bytes for Base64 encoding). Note: See ITU-T Recommendation [G.997.1]. | - | 2.0 |
MREFPSDus | base64(0:145) | R | This parameter SHALL contain the set of breakpoints exchanged in the MREFPSDus fields of the R-PRM message of G.993.2. Base64 encoded of the binary representation defined in Table 12-19/G.993.2 (maximum length is 145 octets, which requires 196 bytes for Base64 encoding). Note: See ITU-T Recommendation [G.997.1]. | - | 2.0 |
LIMITMASK | unsignedInt | R | Indicates the enabled VDSL2 Limit PSD mask of the selected PSD mask class. Bit mask as specified in ITU-T Recommendation G.997.1. Note: For a VDSL2-capable multimode device operating in a mode other than VDSL2, the value of this parameter SHOULD be set to 0. Note: See ITU-T Recommendation [G.997.1]. | - | 2.0 |
US0MASK | unsignedInt | R | Indicates the allowed VDSL2 US0 PSD masks for Annex A operation. Bit mask as specified in see ITU-T Recommendation G.997.1. Note: For a VDSL2-capable multimode device operating in a mode other than VDSL2, the value of this parameter SHOULD be set to 0. Note: See ITU-T Recommendation [G.997.1]. | - | 2.0 |
TRELLISds | int | R | Reports whether trellis coding is enabled in the downstream direction. A value of 1 indicates that trellis coding is in use, and a value of 0 indicates that the trellis is disabled. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. | - | 2.0 |
TRELLISus | int | R | Reports whether trellis coding is enabled in the upstream direction. A value of 1 indicates that trellis coding is in use, and a value of 0 indicates that the trellis is disabled. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. | - | 2.0 |
ACTSNRMODEds | unsignedInt | R | Reports whether the OPTIONAL virtual noise mechanism is in use in the downstream direction. A value of 1 indicates the virtual noise mechanism is not in use, and a value of 2 indicates the virtual noise mechanism is in use. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. | - | 2.0 |
ACTSNRMODEus | unsignedInt | R | Reports whether the OPTIONAL virtual noise mechanism is in use in the upstream direction. A value of 1 indicates the virtual noise mechanism is not in use, and a value of 2 indicates the virtual noise mechanism is in use. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. | - | 2.0 |
VirtualNoisePSDds | base64(0:97) | R | Reports the virtual noise PSD for the downstream direction. Base64 encoded of the binary representation defined in G.997.1 by the parameter called TXREFVNds (maximum length is 97 octets, which requires 132 bytes for Base64 encoding). See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to an empty string. | - | 2.0 |
VirtualNoisePSDus | base64(0:49) | R | Reports the virtual noise PSD for the upstream direction. Base64 encoded of the binary representation defined in G.997.1by the parameter called TXREFVNus (maximum length is 49 octets, which requires 68 bytes for Base64 encoding). See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to an empty string. | - | 2.0 |
ACTUALCE | unsignedInt | R | Reports the actual cyclic extension, as the value of m, in use for the connection. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 99. | - | 2.0 |
LineNumber | int(1:) | R | Signifies the line pair that the modem is using to connection. LineNumber = 1 is the innermost pair. | - | 2.0 |
UpstreamMaxBitRate | unsignedInt | R | The current maximum attainable data rate upstream (expressed in Kbps). Note: This parameter is related to the G.997.1 parameter ATTNDRus, which is measured in bits/s. See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DownstreamMaxBitRate | unsignedInt | R | The current maximum attainable data rate downstream (expressed in Kbps). Note: This parameter is related to the G.997.1 parameter ATTNDRds, which is measured in bits/s. See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UpstreamNoiseMargin | int | R | The current signal-to-noise ratio margin (expressed in 0.1dB) in the upstream direction. Note: In G.997.1, this parameter is called SNRMus. See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DownstreamNoiseMargin | int | R | The current signal-to-noise ratio margin (expressed in 0.1dB) in the downstream direction. Note: In G.997.1, this parameter is called SNRMds. See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRMpbus | string[](:24) | R | Comma-separated list (maximum number of characters 24) of strings. Indicates the current signal-to-noise ratio margin of each upstream band. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. | - | 2.0 |
SNRMpbds | string[](:24) | R | Comma-separated list (maximum number of characters 24) of strings. Indicates the current signal-to-noise ratio margin of each band. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. | - | 2.0 |
INMIATOds | unsignedInt(3:511) | R | The Impulse Noise Monitoring (INM) Inter Arrival Time (IAT) Offset, measured in DMT symbols, that the xTU receiver uses to determine in which bin of the IAT histogram the IAT is reported. Note: In G.997.1, this parameter is called INMIATO. See ITU-T Recommendation [G.997.1]. | - | 2.0 |
INMIATSds | unsignedInt(0:7) | R | The Impulse Noise Monitoring (INM) Inter Arrival Time (IAT) Step that the xTU receiver uses to determine in which bin of the IAT histogram the IAT is reported. Note: In G.997.1, this parameter is called INMIATS. See ITU-T Recommendation [G.997.1]. | - | 2.0 |
INMCCds | unsignedInt(0:64) | R | The Impulse Noise Monitoring (INM) Cluster Continuation value, measured in DMT symbols, that the xTU receiver uses in the cluster indication process. Note: In G.997.1, this parameter is called INMCC. See ITU-T Recommendation [G.997.1]. | - | 2.0 |
INMINPEQMODEds | unsignedInt(0:3) | R | The Impulse Noise Monitoring (INM) Equivalent Impulse Noise Protection (INP) Mode that the xTU receiver uses in the computation of the Equivalent INP. Note: In G.997.1, this parameter is called INM_INPEQ_MODE. See ITU-T Recommendation [G.997.1]. | - | 2.0 |
UpstreamAttenuation | int | R | The current upstream signal loss (expressed in 0.1dB). Doesn’t apply to VDSL2 [G.993.2]. Otherwise has the same value as the single element of TestParams.SATNus. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DownstreamAttenuation | int | R | The current downstream signal loss (expressed in 0.1dB). Doesn’t apply to VDSL2 [G.993.2]. Otherwise has the same value as the single element of TestParams.SATNds. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UpstreamPower | int | R | The current output power at the CPE’s DSL line (expressed in 0.1dBmV). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DownstreamPower | int | R | The current received power at the CPE’s DSL line (expressed in 0.1dBmV). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTURVendor | hexBinary(4) | R | xTU-R vendor identifier as defined in G.994.1 and T1.413. In the case of G.994.1 this corresponds to the four-octet provider code, which MUST be represented as eight hexadecimal digits. Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, it MUST have the value “00000000”. Note: In G.997.1, this parameter is called “xTU-R G.994.1 Vendor ID”. See ITU-T Recommendation [G.997.1]. | - | 2.0 |
XTURCountry | hexBinary(2) | R | T.35 country code of the xTU-R vendor as defined in G.994.1, where the two-octet value defined in G.994.1 MUST be represented as four hexadecimal digits. Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, it MUST have the value “0000”. Note: In G.997.1, this parameter is called “xTU-R G.994.1 Vendor ID”. See ITU-T Recommendation [G.997.1]. | - | 2.0 |
XTURANSIStd | unsignedInt | R | xTU-R T1.413 Revision Number as defined in T1.413 Issue 2. When T1.413 modulation is not in use, the parameter value SHOULD be 0. | - | 2.0 |
XTURANSIRev | unsignedInt | R | xTU-R Vendor Revision Number as defined in T1.413 Issue 2. When T1.413 modulation is not in use, the parameter value SHOULD be 0. | - | 2.0 |
XTUCVendor | hexBinary(4) | R | xTU-C vendor identifier as defined in G.994.1 and T1.413. In the case of G.994.1 this corresponds to the four-octet provider code, which MUST be represented as eight hexadecimal digits. Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, it MUST have the value “00000000”. | - | 2.0 |
XTUCCountry | hexBinary(2) | R | T.35 country code of the xTU-C vendor as defined in G.994.1, where the two-octet value defined in G.994.1 MUST be represented as four hexadecimal digits. Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, it MUST have the value “0000”. | - | 2.0 |
XTUCANSIStd | unsignedInt | R | xTU-C T1.413 Revision Number as defined in T1.413 Issue 2. When T1.413 modulation is not in use, the parameter value SHOULD be 0. | - | 2.0 |
XTUCANSIRev | unsignedInt | R | xTU-C Vendor Revision Number as defined in T1.413 Issue 2. When T1.413 modulation is not in use, the parameter value SHOULD be 0. | - | 2.0 |
Device.DSL.Line.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
TotalStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of Total statistics. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: TotalStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ShowtimeStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the most recent DSL Showtime - the beginning of the period used for collection of Showtime statistics. Showtime is defined as successful completion of the DSL link establishment process. The Showtime statistics are those collected since the most recent establishment of the DSL link. Note: ShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LastShowtimeStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the second most recent DSL Showtime-the beginning of the period used for collection of LastShowtime statistics. If the CPE has not retained information about the second most recent Showtime (e.g., on reboot), the start of LastShowtime statistics MAY temporarily coincide with the start of Showtime statistics. Note: LastShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
CurrentDayStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of CurrentDay statistics. The CPE MAY align the beginning of each CurrentDay interval with days in the UTC time zone, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: CurrentDayStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QuarterHourStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of QuarterHour statistics. The CPE MAY align the beginning of each QuarterHour interval with real-time quarter-hour intervals, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: QuarterHourStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Line.{i}.Stats.Total. | object | R | This object contains DSL line total statistics. See [Chapter 7.2.6/G.997.1]. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
ErroredSecs | unsignedInt | R | Total number of errored seconds (ES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SeverelyErroredSecs | unsignedInt | R | Total number of severely errored seconds (SES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Line.{i}.Stats.Showtime. | object | R | This object contains DSL line statistics accumulated since the most recent DSL Showtime. See [Chapter 7.2.6/G.997.1]. Note: The Showtime parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
ErroredSecs | unsignedInt | R | Number of errored seconds since the most recent DSL Showtime (ES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SeverelyErroredSecs | unsignedInt | R | Number of severely errored seconds since the most recent DSL Showtime (SES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Line.{i}.Stats.LastShowtime. | object | R | This object contains DSL line statistics accumulated since the second most recent DSL Showtime. See [Chapter 7.2.6/G.997.1]. Note: The LastShowtime parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
ErroredSecs | unsignedInt | R | Number of errored seconds since the second most recent DSL Showtime (ES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SeverelyErroredSecs | unsignedInt | R | Number of severely errored seconds since the second most recent DSL Showtime (SES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Line.{i}.Stats.CurrentDay. | object | R | This object contains DSL line statistics accumulated during the current day. See [Chapter 7.2.6/G.997.1]. Note: The CurrentDay parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
ErroredSecs | unsignedInt | R | Number of errored seconds since the second most recent DSL Showtime (ES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SeverelyErroredSecs | unsignedInt | R | Number of severely errored seconds since the second most recent DSL Showtime (SES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Line.{i}.Stats.QuarterHour. | object | R | This object contains DSL line statistics accumulated during the current quarter hour. See [Chapter 7.2.6/G.997.1]. Note: The QuarterHour parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
ErroredSecs | unsignedInt | R | Number of errored seconds since the second most recent DSL Showtime (ES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SeverelyErroredSecs | unsignedInt | R | Number of severely errored seconds since the second most recent DSL Showtime (SES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Line.{i}.TestParams. | object | R | This object contains the DSL line test parameters that are available during the L0 (i.e., Showtime) state. | - | 2.0 |
HLOGGds | unsignedInt | R | Number of sub-carriers per sub-carrier group in the downstream direction for HLOGpsds. Valid values are 1, 2, 4, 8, and 16. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLOGGus | unsignedInt | R | Number of sub-carriers per sub-carrier group in the upstream direction for HLOGpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLOGpsds | string[](:2559) | R | Comma-separated list (maximum number of characters 2559) of strings. Indicates the downstream logarithmic line characteristics per sub-carrier group. The maximum number of elements is 256 for G.992.3, and 512 for G.992.5. For G.993.2, the number of elements will depend on the value of HLOGGds but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: HLOGpsds is measured during initialization and is not updated during Showtime. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLOGpsus | string[](:2559) | R | Comma-separated list (maximum number of characters 2559) of strings. Indicates the upstream logarithmic line characteristics per sub-carrier group. The maximum number of elements is 64 for G.992.3 and G.992.5. For G.993.2, the number of elements will depend on the value of HLOGGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: HLOGpsus is measured during initialization and is not updated during Showtime. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLOGMTds | unsignedInt | R | Indicates the number of symbols over which HLOGpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLOGMTus | unsignedInt | R | Indicates the number of symbols over which HLOGpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNGds | unsignedInt | R | Number of sub-carriers per sub-carrier group in the downstream direction for QLNpsds. Valid values are 1, 2, 4, 8, and 16. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNGus | unsignedInt | R | Number of sub-carriers per sub-carrier group in the upstream direction for QLNpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNpsds | int[](:2047) | R | Comma-separated list (maximum number of characters 2047) of integers. Indicates the downstream quiet line noise per subcarrier group. The maximum number of elements is 256 for G.992.3 and G.992.5. For G.993.2, the number of elements will depend on the value of QLNGds but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: QLNpsds is measured during initialization and is not updated during Showtime. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNpsus | string[](:2047) | R | Comma-separated list (maximum number of characters 2047) of strings. Indicates the upstream quiet line noise per subcarrier group. The maximum number of elements is 64 for G.992.3 and G.992.5. For G.993.2, the number of elements will depend on the value of QLNGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: QLNpsus is measured during initialization and is not updated during Showtime. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNMTds | unsignedInt | R | Indicates the number of symbols over which QLNpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNMTus | unsignedInt | R | Indicates the number of symbols over which QLNpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRGds | unsignedInt | R | Number of sub-carriers per sub-carrier group in the downstream direction for SNRpsds. Valid values are 1, 2, 4, 8, and 16. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRGus | unsignedInt | R | Number of sub-carriers per sub-carrier group in the upstream direction for SNRpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRpsds | int[](:2047) | R | Comma-separated list (maximum number of characters 2047) of integers. Indicates the downstream SNR per subcarrier group. The maximum number of elements is 256 for G.992.3, and 512 for G.992.5. For G.993.2, the number of elements will depend on the value of SNRGds but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: SNRpsds is first measured during initialization and is updated during Showtime. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRpsus | string[](:2047) | R | Comma-separated list (maximum number of characters 2047) of strings. Indicates the upstream SNR per subcarrier group. The maximum number of elements is 64 for G.992.3 and G.992.5. For G.993.2, the number of elements will depend on the value of SNRGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: SNRpsus is first measured during initialization and is updated during Showtime. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRMTds | unsignedInt | R | Indicates the number of symbols over which SNRpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRMTus | unsignedInt | R | Indicates the number of symbols over which SNRpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LATNds | string[](:35) | R | Comma-separated list (maximum number of characters 35) of strings. Indicates the downstream line attenuation averaged across all sub-carriers in the frequency band, as computed during initialization. Number of elements is dependent on the number of downstream bands but will exceed one only for ITU-T G.993.2. Interpretation of LATNds is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LATNus | string[](:35) | R | Comma-separated list (maximum number of characters 35) of strings. Indicates the upstream line attenuation averaged across all sub-carriers in the frequency band, as computed during initialization. Number of elements is dependent on the number of upstream bands but will exceed one only for ITU-T G.993.2. Interpretation of LATNus is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SATNds | string[](:35) | R | Comma-separated list (maximum number of characters 35) of strings. Indicates the downstream signal attenuation averaged across all active sub-carriers in the frequency band, as computed during the L0 (i.e., Showtime) state. Number of elements is dependent on the number of downstream bands but will exceed one only for ITU-T G.993.2. Interpretation of SATNds is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SATNus | string[](:35) | R | Comma-separated list (maximum number of characters 35) of strings. Indicates the upstream signal attenuation averaged across all active sub-carriers in the frequency band, as computed during the L0 (i.e., Showtime) state. Number of elements is dependent on the number of downstream bands but will exceed one only for ITU-T G.993.2. Interpretation of SATNus is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Line.{i}.DataGathering. | object | R | This object models the DSL data gathering function at the VTU-R. This only applies to VDSL2. Note: see ITU-T Recommendation [G.993.2]. | - | 2.8 |
LoggingDepthR | unsignedInt | R | This parameter is the maximum depth of the entire data gathering event buffer at the VTU-R, in number of records, where each of the records consists of 6 bytes indicating a data gathering event as defined in [G.993.2]. Note: This parameter is defined as LOGGING_DEPTH_R in Clause 7.5.3.2 of ITU-T Recommendation [G.997.1]. | - | 2.8 |
ActLoggingDepthReportingR | unsignedInt | R | This parameter is actual logging depth that is used for reporting the VTU-R event trace buffer over the eoc channel, in number of records, where each of the records consists of 6 bytes indicating a data gathering event as defined in [G.993.2]. Note: This parameter is defined as ACT_LOGGING_DEPTH_REPORTING_R in Clause 7.5.3.4 of ITU-T Recommendation [G.997.1]. | - | 2.8 |
EventTraceBufferR | string(:256) | R | The value MUST be the Path Name of a row in the DeviceInfo.VendorLogFile. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. This parameter identifies the log file of the the data gathering event trace buffer containing the event records that originated at the VTU-R. This indicates the table entry that represents a Vendor Log File that contains the data gathering buffer at the VTU-R in the DeviceInfo.VendorLogFile table. This data gathering buffer MAY be retrieved wia an upload RPC of the identified Vendor Log File. Note: This parameter is defined as EVENT_TRACE_BUFFER_R in Clause 7.5.3.6 of ITU-T Recommendation [G.997.1] and Clause 11.5 of ITU-T Recommendation [G.993.2]. | - | 2.8 |
Device.DSL.Channel.{i}. | object(0:) | R | DSL Channel table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models DSL channel(s) on top of physical DSL lines. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.0 |
Enable | boolean | W | Enables or disables the channel. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.0 |
Status | string | R | The current operational state of the channel (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the channel as assigned by the CPE. | - | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the channel entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | R | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. | - | 2.0 |
LinkEncapsulationSupported | string[] | R | Comma-separated list of strings. List items indicate which link encapsulation standards and recommendations are supported by the Channel instance. Each list item is an enumeration of:
|
- | 2.0 |
LinkEncapsulationUsed | string | R | Indicates the link encapsulation standard that the Channel instance is using for the connection. Enumeration of: |
- | 2.0 |
LPATH | unsignedInt(:3) | R | Reports the index of the latency path supporting the bearer channel. Note: See ITU-T Recommendation [Section 7.5.2.7/G.997.1]. | - | 2.0 |
INTLVDEPTH | unsignedInt | R | Reports the interleaver depth D for the latency path indicated in LPATH. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. | - | 2.0 |
INTLVBLOCK | int | R | Reports the interleaver block length in use on the latency path indicated in LPATH. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. | - | 2.0 |
ActualInterleavingDelay | unsignedInt | R | Reports the actual delay, in milliseconds, of the latency path due to interleaving. Note: In G.997.1, this parameter is called “Actual Interleaving Delay.” See ITU-T Recommendation [G.997.1]. | - | 2.0 |
ACTINP | int | R | Reports the actual impulse noise protection (INP) provided by the latency path indicated in LPATH. The value is the actual INP in the L0 (i.e., Showtime) state. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. | - | 2.0 |
INPREPORT | boolean | R | Reports whether the value reported in ACTINP was computed assuming the receiver does not use erasure decoding. Valid values are 0 (computed per the formula assuming no erasure decoding) and 1 (computed by taking into account erasure decoding capabilities of receiver). Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to false. | - | 2.0 |
NFEC | int | R | Reports the size, in octets, of the Reed-Solomon codeword in use on the latency path indicated in LPATH. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. | - | 2.0 |
RFEC | int | R | Reports the number of redundancy bytes per Reed-Solomon codeword on the latency path indicated in LPATH. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. | - | 2.0 |
LSYMB | int | R | Reports the number of bits per symbol assigned to the latency path indicated in LPATH. This value does not include overhead due to trellis coding. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. | - | 2.0 |
UpstreamCurrRate | unsignedInt | R | The current physical layer aggregate data rate (expressed in Kbps) of the upstream DSL connection. Note: If the parameter is implemented but no value is available, it MUST have the value 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DownstreamCurrRate | unsignedInt | R | The current physical layer aggregate data rate (expressed in Kbps) of the downstream DSL connection. Note: If the parameter is implemented but no value is available, it MUST have the value 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ACTNDR | unsignedInt | R | Actual net data rate expressed in Kbps. Independent whether retransmission is used or not in a given transmit direction:
|
- | 2.8 |
ACTINPREIN | unsignedInt(0:255) | R | Actual impulse noise protection against REIN, expressed in 0.1 DMT symbols. If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditions detailed in [ITU T G.998.4]) on the bearer channel in the L0 state. In the L2 state, the parameter contains the INP in the previous L0 state. The value is coded in fractions of DMT symbols with a granularity of 0.1 symbols. The range is from 0 to 25.4. A special value of 25.5 indicates an ACTINP_REIN of 25.5 or higher. Note: This parameter is defined as ACTINP_REIN in Clause 7.5.2.9 of ITU-T Recommendation [G.997.1]. | - | 2.8 |
Device.DSL.Channel.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
TotalStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of Total statistics. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: TotalStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ShowtimeStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the most recent DSL Showtime - the beginning of the period used for collection of Showtime statistics. Showtime is defined as successful completion of the DSL link establishment process. The Showtime statistics are those collected since the most recent establishment of the DSL link. Note: ShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LastShowtimeStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the second most recent DSL Showtime-the beginning of the period used for collection of LastShowtime statistics. If the CPE has not retained information about the second most recent Showtime (e.g., on reboot), the start of LastShowtime statistics MAY temporarily coincide with the start of Showtime statistics. Note: LastShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
CurrentDayStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of CurrentDay statistics. The CPE MAY align the beginning of each CurrentDay interval with days in the UTC time zone, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: CurrentDayStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QuarterHourStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of QuarterHour statistics. The CPE MAY align the beginning of each QuarterHour interval with real-time quarter-hour intervals, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: QuarterHourStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Channel.{i}.Stats.Total. | object | R | This object contains DSL channel total statistics [G.997.1]. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
XTURFECErrors | unsignedInt | R | Total number of FEC errors detected (FEC-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCFECErrors | unsignedInt | R | Total number of FEC errors detected by the ATU-C (FEC-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTURHECErrors | unsignedInt | R | Total number of HEC errors detected (HEC-P as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCHECErrors | unsignedInt | R | Total number of HEC errors detected by the ATU-C (HEC-PFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTURCRCErrors | unsignedInt | R | Total number of CRC errors detected (CV-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCCRCErrors | unsignedInt | R | Total number of CRC errors detected by the ATU-C (CV-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Channel.{i}.Stats.Showtime. | object | R | This object contains DSL channel statistics accumulated since the most recent DSL Showtime [G.997.1]. Note: The Showtime parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
XTURFECErrors | unsignedInt | R | Number of FEC errors detected since the most recent DSL Showtime (FEC-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCFECErrors | unsignedInt | R | Number of FEC errors detected by the ATU-C since the most recent DSL Showtime (FEC-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTURHECErrors | unsignedInt | R | Number of HEC errors detected since the most recent DSL Showtime (HEC-P as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCHECErrors | unsignedInt | R | Number of HEC errors detected by the ATU-C since the most recent DSL Showtime (HEC-PFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTURCRCErrors | unsignedInt | R | Number of CRC errors detected since the most recent DSL Showtime (CV-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCCRCErrors | unsignedInt | R | Number of CRC errors detected by the ATU-C since the most recent DSL Showtime (CV-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Channel.{i}.Stats.LastShowtime. | object | R | This object contains DSL channel statistics accumulated since the second most recent DSL Showtime [G.997.1]. Note: The LastShowtime parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
XTURFECErrors | unsignedInt | R | Number of FEC errors detected since the second most recent DSL Showtime (FEC-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCFECErrors | unsignedInt | R | Number of FEC errors detected by the ATU-C since the second most recent DSL Showtime (FEC-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTURHECErrors | unsignedInt | R | Number of HEC errors detected since the second most recent DSL Showtime (HEC-P as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCHECErrors | unsignedInt | R | Number of HEC errors detected by the ATU-C since the second most recent DSL Showtime (HEC-PFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTURCRCErrors | unsignedInt | R | Number of CRC errors detected since the second most recent DSL Showtime (CV-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCCRCErrors | unsignedInt | R | Number of CRC errors detected by the ATU-C since the second most recent DSL Showtime (CV-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Channel.{i}.Stats.CurrentDay. | object | R | This object contains DSL channel statistics accumulated during the current day [G.997.1]. Note: The CurrentDay parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
XTURFECErrors | unsignedInt | R | Number of FEC errors detected since the second most recent DSL Showtime (FEC-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCFECErrors | unsignedInt | R | Number of FEC errors detected by the ATU-C since the second most recent DSL Showtime (FEC-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTURHECErrors | unsignedInt | R | Number of HEC errors detected since the second most recent DSL Showtime (HEC-P as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCHECErrors | unsignedInt | R | Number of HEC errors detected by the ATU-C since the second most recent DSL Showtime (HEC-PFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTURCRCErrors | unsignedInt | R | Number of CRC errors detected since the second most recent DSL Showtime (CV-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCCRCErrors | unsignedInt | R | Number of CRC errors detected by the ATU-C since the second most recent DSL Showtime (CV-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Channel.{i}.Stats.QuarterHour. | object | R | This object contains DSL channel statistics accumulated during the current quarter hour [G.997.1]. Note: The QuarterHour parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
XTURFECErrors | unsignedInt | R | Number of FEC errors detected since the second most recent DSL Showtime (FEC-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCFECErrors | unsignedInt | R | Number of FEC errors detected by the ATU-C since the second most recent DSL Showtime (FEC-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTURHECErrors | unsignedInt | R | Number of HEC errors detected since the second most recent DSL Showtime (HEC-P as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCHECErrors | unsignedInt | R | Number of HEC errors detected by the ATU-C since the second most recent DSL Showtime (HEC-PFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTURCRCErrors | unsignedInt | R | Number of CRC errors detected since the second most recent DSL Showtime (CV-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
XTUCCRCErrors | unsignedInt | R | Number of CRC errors detected by the ATU-C since the second most recent DSL Showtime (CV-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.BondingGroup.{i}. | object(0:) | R | DSL bonding group table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each instance is a bonding group, and is expected to be stacked above a DSL.Channel instance or a FAST.Line instance for each bonded channel in the group. Many of the parameters within this object, including LowerLayers, are read-only because bonding is not expected to be configured by a Controller. The DSL bonding data model is closely aligned with [TR-159]. Corresponds to [TR-159] oBondingGroup. At most one entry in this table can exist with a given value for Alias, or with a given value for Name, or with a given value for GroupID. |
- | 2.0 |
Enable | boolean | W | Enables or disables the bonding group. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.0 |
Status | string | R | The current operational state of the bonding group (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the bonding group as assigned by the CPE. | - | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the bonding group entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | R | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. LowerLayers is read-only for this object because bonding is expected to be configured by the CPE, not by the Controller. | - | 2.0 |
GroupStatus | string[] | R | Comma-separated list of strings. Indicates the current fault status of the DSL bonding group. Each list item is an enumeration of:
|
- | 2.0 |
GroupID | unsignedInt | R | DSL bonding group ID. Corresponds to [TR-159] oBondingGroup.aGroupID. | - | 2.0 |
BondSchemesSupported | string[] | R | Comma-separated list of strings. Supported DSL bonding schemes. Each list item is an enumeration of: |
- | 2.0 |
BondScheme | string | R | The value MUST be a member of the list reported by the BondSchemesSupported parameter. Currently operating bonding scheme. Corresponds to [TR-159] aGroupOperBondScheme. | - | 2.0 |
GroupCapacity | unsignedInt(1:32) | R | DSL bonding group capacity, i.e. the maximum number of channels that can be bonded in this group. Corresponds to [TR-159] oBondingGroup.aGroupCapacity. | - | 2.0 |
RunningTime | unsignedInt | R | The accumulated time in seconds for which this bonding group has been operationally up. Corresponds to [Section 11.4.2/G.998.1] Group Running Time. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
TargetUpRate | unsignedInt | R | Desired upstream data rate in bits per second for this DSL bonding group (zero indicates best effort). Corresponds to [TR-159] oBondingGroup.aGroupTargetUpRate. | - | 2.0 |
TargetDownRate | unsignedInt | R | Desired downstream data rate in bits per second for DSL bonding group (zero indicates best effort). Corresponds to [TR-159] oBondingGroup.aGroupTargetDownRate. | - | 2.0 |
ThreshLowUpRate | unsignedInt | R | Threshold upstream data rate in bits per second for this DSL bonding group. GroupStatus will include LowRate whenever the upstream rate is less than this threshold. Corresponds to [TR-159] oBondingGroup.aGroupThreshLowUpRate. | - | 2.0 |
ThreshLowDownRate | unsignedInt | R | Threshold downstream data rate in bits per second for this DSL bonding group. GroupStatus will include LowRate whenever the downstream rate is less than this threshold. Corresponds to [TR-159] oBondingGroup.aGroupThreshLowDownRate. | - | 2.0 |
UpstreamDifferentialDelayTolerance | unsignedInt | R | The maximum upstream differential delay in milliseconds among member links in a bonding group. Corresponds to [Section 11.4.1/G.998.1] Differential Delay Tolerance. | - | 2.0 |
DownstreamDifferentialDelayTolerance | unsignedInt | R | The maximum downstream differential delay in milliseconds among member links in a bonding group. Corresponds to [Section 11.4.1/G.998.1] Differential Delay Tolerance. | - | 2.0 |
BondedChannelNumberOfEntries | unsignedInt(1:32) | R | The number of entries in the BondedChannel table. Corresponds to [TR-159] oBondingGroup.aGroupNumChannels. | - | 2.0 |
Device.DSL.BondingGroup.{i}.BondedChannel.{i}. | object(0:) | R | DSL bonded channel table. Each table entry represents a bonded channel within the bonding group, and is associated with exactly one DSL.Channel instance or one FAST.Line instance. There MUST be an instance of BondedChannel for each DSL channel or FAST line that is bonded. When a DSL.Channel or FAST.Line is no longer bonded, then the CPE MUST delete the corresponding BondedChannel instance. However, when a bonded DSL.Channel or FAST.Line becomes disabled, the channel remains bonded and so the corresponding BondedChannel instance MUST NOT be deleted. At most one entry in this table can exist with a given value for Alias, or with a given value for Channel. |
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Channel | string(:256) | R | The value MUST be the Path Name of a row in the DSL.Channel. or FAST.Line. tables. If the referenced object is deleted, the parameter value MUST be set to an empty string.This is the channel that is being bonded. This is read-only because bonding is expected to be configured by the CPE, not by the Controller. | - | 2.0 |
Device.DSL.BondingGroup.{i}.BondedChannel.{i}.Ethernet. | object | R | Per-channel [G.998.2] Ethernet-based bonding parameters. This object MUST be present if, and only if, BondScheme is Ethernet. | - | 2.0 |
Device.DSL.BondingGroup.{i}.BondedChannel.{i}.Ethernet.Stats. | object | R | Per-channel [G.998.2] Ethernet-based bonding statistics. These relate to the [G.998.2] PME (Physical Medium Entity) Aggregation Function (PAF) lower layer (per-channel) interfaces. The CPE MUST reset the Stats parameters either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
UnderflowErrorsSent | unsignedInt | R | Number of underflow errors sent, i.e. on the transmit side of the interface. | - | 2.0 |
CRCErrorsReceived | unsignedInt | R | Number of CRC errors received, i.e. on the receive side of the interface. | - | 2.0 |
AlignmentErrorsReceived | unsignedInt | R | Number of alignment errors received, i.e. on the receive side of the interface. | - | 2.0 |
ShortPacketsReceived | unsignedInt | R | Number of short packets received, i.e. on the receive side of the interface. | - | 2.0 |
LongPacketsReceived | unsignedInt | R | Number of long packets received, i.e. on the receive side of the interface. | - | 2.0 |
OverflowErrorsReceived | unsignedInt | R | Number of overflow errors received, i.e. on the receive side of the interface. | - | 2.0 |
PauseFramesReceived | unsignedInt | R | Number of pause frames received, i.e. on the receive side of the interface. | - | 2.0 |
FramesDropped | unsignedInt | R | Number of frames dropped, e.g. because the receive queue is full. | - | 2.0 |
Device.DSL.BondingGroup.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsSent | unsignedLong | R | The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnknownProtoPacketsReceived | unsignedInt | R | The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
TotalStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of Total statistics. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: TotalStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
CurrentDayStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of CurrentDay statistics. The CPE MAY align the beginning of each CurrentDay interval with days in the UTC time zone, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: CurrentDayStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QuarterHourStart | unsignedInt | R | DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of QuarterHour statistics. The CPE MAY align the beginning of each QuarterHour interval with real-time quarter-hour intervals, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: QuarterHourStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.BondingGroup.{i}.Stats.Total. | object | R | Total statistics for this bonding group. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
FailureReasons | string[] | R | Comma-separated list of strings. Indicates the failure conditions that have occurred during the accumulation period. Each list item is an enumeration of:
|
- | 2.0 |
UpstreamRate | unsignedInt | R | The achieved upstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. | - | 2.0 |
DownstreamRate | unsignedInt | R | The achieved downstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. | - | 2.0 |
UpstreamPacketLoss | unsignedInt | R | The total number of upstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. | - | 2.0 |
DownstreamPacketLoss | unsignedInt | R | The total number of downstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. | - | 2.0 |
UpstreamDifferentialDelay | unsignedInt | R | The achieved upstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). | - | 2.0 |
DownstreamDifferentialDelay | unsignedInt | R | The achieved downstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). | - | 2.0 |
FailureCount | unsignedInt | R | The number of times that the group was declared Unavailable during the accumulation period. Corresponds to [Section 11.4.3/G.998.1] Group Failure Count. | - | 2.0 |
ErroredSeconds | unsignedInt | R | The time in seconds during which the group was declared Errored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**ES. | - | 2.0 |
SeverelyErroredSeconds | unsignedInt | R | The time in seconds during which the group was declared SeverelyErrored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**SES. | - | 2.0 |
unsignedInt | R | The time in seconds during which the group was declared Unavailable during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**UAS. | - | 2.0 | |
Device.DSL.BondingGroup.{i}.Stats.CurrentDay. | object | R | Current day statistics for this bonding group. Note: The CurrentDay parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
FailureReasons | string[] | R | Comma-separated list of strings. Indicates the failure conditions that have occurred during the accumulation period. Each list item is an enumeration of:
|
- | 2.0 |
UpstreamRate | unsignedInt | R | The achieved upstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. | - | 2.0 |
DownstreamRate | unsignedInt | R | The achieved downstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. | - | 2.0 |
UpstreamPacketLoss | unsignedInt | R | The total number of upstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. | - | 2.0 |
DownstreamPacketLoss | unsignedInt | R | The total number of downstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. | - | 2.0 |
UpstreamDifferentialDelay | unsignedInt | R | The achieved upstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). | - | 2.0 |
DownstreamDifferentialDelay | unsignedInt | R | The achieved downstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). | - | 2.0 |
FailureCount | unsignedInt | R | The number of times that the group was declared Unavailable during the accumulation period. Corresponds to [Section 11.4.3/G.998.1] Group Failure Count. | - | 2.0 |
ErroredSeconds | unsignedInt | R | The time in seconds during which the group was declared Errored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**ES. | - | 2.0 |
SeverelyErroredSeconds | unsignedInt | R | The time in seconds during which the group was declared SeverelyErrored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**SES. | - | 2.0 |
unsignedInt | R | The time in seconds during which the group was declared Unavailable during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**UAS. | - | 2.0 | |
Device.DSL.BondingGroup.{i}.Stats.QuarterHour. | object | R | Current quarter hour statistics for this bonding group. Note: The QuarterHour parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.0 |
FailureReasons | string[] | R | Comma-separated list of strings. Indicates the failure conditions that have occurred during the accumulation period. Each list item is an enumeration of:
|
- | 2.0 |
UpstreamRate | unsignedInt | R | The achieved upstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. | - | 2.0 |
DownstreamRate | unsignedInt | R | The achieved downstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. | - | 2.0 |
UpstreamPacketLoss | unsignedInt | R | The total number of upstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. | - | 2.0 |
DownstreamPacketLoss | unsignedInt | R | The total number of downstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. | - | 2.0 |
UpstreamDifferentialDelay | unsignedInt | R | The achieved upstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). | - | 2.0 |
DownstreamDifferentialDelay | unsignedInt | R | The achieved downstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). | - | 2.0 |
FailureCount | unsignedInt | R | The number of times that the group was declared Unavailable during the accumulation period. Corresponds to [Section 11.4.3/G.998.1] Group Failure Count. | - | 2.0 |
ErroredSeconds | unsignedInt | R | The time in seconds during which the group was declared Errored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**ES. | - | 2.0 |
SeverelyErroredSeconds | unsignedInt | R | The time in seconds during which the group was declared SeverelyErrored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**SES. | - | 2.0 |
unsignedInt | R | The time in seconds during which the group was declared Unavailable during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**UAS. | - | 2.0 | |
Device.DSL.BondingGroup.{i}.Ethernet. | object(0:1) | R | Ethernet-based bonding parameters [G.998.2]. This object MUST be present if, and only if, BondScheme is Ethernet. This object is a member of a union, i.e., it is a member of a group of objects of which only one can exist at a given time. |
- | 2.0 |
Device.DSL.BondingGroup.{i}.Ethernet.Stats. | object | R | [G.998.2] Ethernet-based bonding statistics. These relate to the [G.998.2] PME (Physical Medium Entity) Aggregation Function (PAF) and to its upper layer interface. PAF lower layer interface statistics are in the BondedChannel.{i}.Ethernet.Stats objects. The CPE MUST reset the Stats parameters either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
PAFErrors | unsignedInt | R | Number of PAF errors. Corresponds to [TR-159] oBondETH.aEthRxErrors. | - | 2.0 |
PAFSmallFragments | unsignedInt | R | Number of PAF Small Fragment events. Corresponds to [TR-159] oBondETH.aEthRxSmallFragments. | - | 2.0 |
PAFLargeFragments | unsignedInt | R | Number of PAF Large Fragment events. Corresponds to [TR-159] oBondETH.aEthRxLargeFragments. | - | 2.0 |
PAFBadFragments | unsignedInt | R | Number of PAF Bad Fragment events. Corresponds to [TR-159] oBondETH.aEthRxBadFragments. | - | 2.0 |
PAFLostFragments | unsignedInt | R | Number of PAF Lost Fragment events. Corresponds to [TR-159] oBondETH.aEthRxLostFragments. | - | 2.0 |
PAFLateFragments | unsignedInt | R | Number of PAF Late Fragment events. | - | 2.0 |
PAFLostStarts | unsignedInt | R | Number of PAF Lost Start events. Corresponds to [TR-159] oBondETH.aEthRxLostStarts. | - | 2.0 |
PAFLostEnds | unsignedInt | R | Number of PAF Lost End events. Corresponds to [TR-159] oBondETH.aEthRxLostEnds. | - | 2.0 |
PAFOverflows | unsignedInt | R | Number of PAF Overflow events. Corresponds to [TR-159] oBondETH.aEthRxOverflows. | - | 2.0 |
PauseFramesSent | unsignedInt | R | Number of pause frames sent, i.e. on the transmit side of the interface. | - | 2.0 |
CRCErrorsReceived | unsignedInt | R | Number of CRC errors received, i.e. on the receive side of the interface. | - | 2.0 |
AlignmentErrorsReceived | unsignedInt | R | Number of alignment errors received, i.e. on the receive side of the interface. | - | 2.0 |
ShortPacketsReceived | unsignedInt | R | Number of short packets received, i.e. on the receive side of the interface. | - | 2.0 |
LongPacketsReceived | unsignedInt | R | Number of long packets received, i.e. on the receive side of the interface. | - | 2.0 |
OverflowErrorsReceived | unsignedInt | R | Number of overflow errors received, i.e. on the receive side of the interface. | - | 2.0 |
FramesDropped | unsignedInt | R | Number of frames dropped, e.g. because the receive queue is full. | - | 2.0 |
Device.DSL.Diagnostics. | object | R | The DSL Diagnostics object. | - | 2.0 |
Device.DSL.Diagnostics.ADSLLineTest. | object | R | This object is to provide diagnostic information for a CPE with an ADSL2 or ADSL2+ modem WAN interface, but MAY also be used for ADSL. | - | 2.0 |
DiagnosticsState | string | W | [DiagnosticsState] Indicates the availability of diagnostics data. Enumeration of: Enumeration of:
If the ACS sets the value of this parameter to Requested, the CPE MUST initiate the corresponding diagnostic test. When writing, the only allowed values are Requested and Canceled. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set, and any errors or inconsistencies in the test parameters MUST be detected, either prior to or at the same time as (in the same SetParameterValues) setting this parameter to Requested. When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic test. When the test is completed, the value of this parameter MUST be either Complete (if the test completed successfully), or one of the Error values listed above. If the value of this parameter is anything other than Complete, the values of the results parameters for this test are indeterminate. When the diagnostic initiated by the ACS is completed (successfully or not), but not if it is canceled for any reason, the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message. After the diagnostic is complete, the value of all result parameters (all read-only parameters in this object) MUST be retained by the CPE until either this diagnostic is run again, or the CPE reboots. After a reboot, if the CPE has not retained the result parameters from the most recent test, it MUST set the value of this parameter to None. Modifying any of the writable parameters in this object except for this one MUST result in the value of this parameter being set to None. While the test is in progress, modifying any of the writable parameters in this object except for this one MUST result in the test being terminated and the value of this parameter being set to None. While the test is in progress, setting this parameter to Requested (and possibly modifying other writable parameters in this object) MUST result in the test being terminated and then restarted using the current values of the test parameters. While the test is in progress, setting this parameter to Canceled MUST result in the test being canceled and the value of this parameter being set to None. If the CPE does not support the Canceled value, it MUST return a SPV error with “Invalid Parameter value” (9007) to the ACS instead. Enumeration of:
|
- | 2.0 |
Interface | string(:256) | W | The value MUST be the Path Name of a row in the DSL.Channel. table. This is the interface over which the test is to be performed. | - | 2.0 |
ACTPSDds | int | R | Downstream actual power spectral density. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ACTPSDus | int | R | Upstream actual power spectral density. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ACTATPds | int | R | Downstream actual aggregate transmitter power. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ACTATPus | int | R | Upstream actual aggregate transmitter power. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLINSCds | int | R | Downstream linear representation scale. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLINSCus | int | R | Scaling used to represent the upstream linear channel characteristics. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLINGds | unsignedInt | R | Number of sub-carriers per sub-carrier group in the downstream direction for HLINpsds. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLINGus | unsignedInt | R | Number of sub-carriers per sub-carrier group in the downstream direction for HLINpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLOGGds | unsignedInt | R | Number of sub-carriers per sub-carrier group in the downstream direction for HLOGpsds. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLOGGus | unsignedInt | R | Number of sub-carriers per sub-carrier group in the upstream direction for HLOGpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLOGpsds | string[](:2559) | R | Comma-separated list (maximum number of characters 2559) of strings. List items represent downstream logarithmic channel characteristics per sub-carrier group. The maximum number of elements is 256 for G.992.3, and 512 for G.992.5. For G.993.2, the number of elements will depend on the value of HLOGGds but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: HLOGpsds is measured during initialization and is not updated during Showtime. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLOGpsus | string[](:2559) | R | Comma-separated list (maximum number of characters 2559) of strings. List items represent upstream logarithmic channel characteristics per sub-carrier group. The maximum number of elements is 64 for G.992.3 and G.992.5. For G.993.2, the number of elements will depend on the value of HLOGGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: HLOGpsus is measured during initialization and is not updated during Showtime. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLOGMTds | unsignedInt | R | Indicates the number of symbols over which HLOGpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLOGMTus | unsignedInt | R | Indicates the number of symbols over which HLOGpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LATNpbds | string[](:24) | R | Comma-separated list (maximum number of characters 24) of strings. List items represent downstream line attenuation per usable band, as computed during initialization. Number of elements is dependent on the number of downstream bands but will exceed one only for G.993.2. Interpretation of LATNpbds is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LATNpbus | string[](:24) | R | Comma-separated list (maximum number of characters 24) of strings. List items represent upstream line attenuation per usable band, as computed during initialization. Number of elements is dependent on the number of upstream bands but will exceed one only for G.993.2. Interpretation of LATNpbus is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SATNds | string[](:24) | R | Comma-separated list (maximum number of characters 24) of strings. List items represent downstream signal attenuation per usable band, as computed during the L0 (i.e., Showtime) state. Number of elements is dependent on the number of downstream bands but will exceed one only for G.993.2. Interpretation of SATNds is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SATNus | string[](:24) | R | Comma-separated list (maximum number of characters 24) of strings. List items represent upstream signal attenuation per usable band, as computed during the L0 (i.e., Showtime) state. Number of elements is dependent on the number of downstream bands but will exceed one only for G.993.2. Interpretation of SATNus is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLINpsds | int[](:61430) | R | Comma-separated list (maximum number of characters 61430) of integers. List items represent downstream linear channel characteristics per subcarrier group. Maximum number of complex pairs is 256 for G.992.3, and 512 for G.992.5. For G.993.2, the number of pairs will depend on the value of HLINGds but will not exceed 512. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: HLIN is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HLINpsus | string[](:61430) | R | Comma-separated list (maximum number of characters 61430) of strings. List items represent upstream linear channel characteristics per sub-carrier group. Maximum number of complex pairs is 64 for G.992.3, and G.992.5. For G.993.2, the number of pairs will depend on the value of HLINGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: HLIN is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNGds | unsignedInt | R | Number of sub-carriers per sub-carrier group in the downstream direction for QLNpsds. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNGus | unsignedInt | R | Number of sub-carriers per sub-carrier group in the upstream direction for QLNpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNpsds | int[](:61430) | R | Comma-separated list (maximum number of characters 61430) of integers. List items represent downstream quiet line noise per subcarrier group. Maximum number of elements is 256 for G.992.3, 512 for G.992.5. For G.993.2, the number of elements will depend on the value of QLNGds but will not exceed 512. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: QLN is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNpsus | string[](:61430) | R | Comma-separated list (maximum number of characters 61430) of strings. List items represent upstream quiet line noise per subcarrier group. The maximum number of elements is 64 for G.992.3, and G.992.5. For G.993.2, the number of elements will depend on the value of QLNGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: QLN is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNMTds | unsignedInt | R | Indicates the number of symbols over which QLNpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
QLNMTus | unsignedInt | R | Indicates the number of symbols over which QLNpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRGds | unsignedInt | R | Number of sub-carriers per sub-carrier group in the downstream direction for SNRpsds. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRGus | unsignedInt | R | Number of sub-carriers per sub-carrier group in the upstream direction for SNRpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRpsds | int[](:61430) | R | Comma-separated list (maximum number of characters 61430) of integers. List items represent downstream SNR per subcarrier group. Maximum number of elements is 256 for G.992.3, 512 for G.992.5. For G.993.2, the number of elements will depend on the value of SNRGds but will not exceed 512. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: SNRps is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRpsus | string[](:61430) | R | Comma-separated list (maximum number of characters 61430) of strings. List items represent upstream SNR per subcarrier group. The maximum number of elements is 64 for G.992.3, and G.992.5. For G.993.2, the number of elements will depend on the value of SNRGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: SNRps is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRMTds | unsignedInt | R | Indicates the number of symbols over which SNRpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
SNRMTus | unsignedInt | R | Indicates the number of symbols over which SNRpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BITSpsds | int[](:61430) | R | Comma-separated list (maximum number of characters 61430) of integers. List items represent downstream bit allocation per subcarrier group. Maximum number of elements is 256 for G.992.3, 512 for G.992.5. Interpretation of the value is as defined in ITU-T Rec. [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BITSpsus | string[](:61430) | R | Comma-separated list (maximum number of characters 61430) of strings. List items represent upstream bit allocation per subcarrier group. Maximum number of elements is 256 for G.992.3, 512 for G.992.5. Interpretation of the value is as defined in ITU-T Rec. [G.997.1]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.DSL.Diagnostics.SELTUER. | object | R | This object contains DSL Single Ended Line Test - Physical Medium Dependent (SELT-PMD) Uncalibrated Echo Response (UER) diagnostics parameters. This object is for the CPE, aka the Transmission Unit - Remote end (TU-R). Reference: ITU-T Recommendation [Clause A.2, SELT-PMD management entity/G.996.2]. | - | 2.13 |
DiagnosticsState | string | W | [DiagnosticsState] Indicates the availability of diagnostics data. Enumeration of: Enumeration of:
If the ACS sets the value of this parameter to Requested, the CPE MUST initiate the corresponding diagnostic test. When writing, the only allowed values are Requested and Canceled. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set, and any errors or inconsistencies in the test parameters MUST be detected, either prior to or at the same time as (in the same SetParameterValues) setting this parameter to Requested. When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic test. When the test is completed, the value of this parameter MUST be either Complete (if the test completed successfully), or one of the Error values listed above. If the value of this parameter is anything other than Complete, the values of the results parameters for this test are indeterminate. When the diagnostic initiated by the ACS is completed (successfully or not), but not if it is canceled for any reason, the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message. After the diagnostic is complete, the value of all result parameters (all read-only parameters in this object) MUST be retained by the CPE until either this diagnostic is run again, or the CPE reboots. After a reboot, if the CPE has not retained the result parameters from the most recent test, it MUST set the value of this parameter to None. Modifying any of the writable parameters in this object except for this one MUST result in the value of this parameter being set to None. While the test is in progress, modifying any of the writable parameters in this object except for this one MUST result in the test being terminated and the value of this parameter being set to None. While the test is in progress, setting this parameter to Requested (and possibly modifying other writable parameters in this object) MUST result in the test being terminated and then restarted using the current values of the test parameters. While the test is in progress, setting this parameter to Canceled MUST result in the test being canceled and the value of this parameter being set to None. If the CPE does not support the Canceled value, it MUST return a SPV error with “Invalid Parameter value” (9007) to the ACS instead. Enumeration of:
|
- | 2.13 |
Interface | string(:256) | W | The value MUST be the Path Name of a row in the DSL.Line. table. This is the interface over which the test is to be performed. | - | 2.13 |
UERMaxMeasurementDuration | unsignedInt(5:240) | W | This parameter is the SELT UER maximum measurement duration (MMD) measured in seconds. This parameter is defined as SELT_UER_MMD_R in ITU-T Recommendation [Clause A.2.1.1/G.996.2]. | - | 2.13 |
ExtendedBandwidthOperation | boolean | R | This parameter indicates if the option for extended bandwidth SELT is applied (true) or not applied (false). If the option for extended bandwidth SELT is applied to UER, then UERGroupSize has three valid values: 1, 2 and 12. If the option for extended bandwidth SELT is not applied to UER, then UERGroupSize has two valid values: 1 and 2. UERGroupSize is reported if the option for extended bandwidth UER SELT is supported; otherwise, reporting of the group size is optional. | - | 2.13 |
UER | int[2:2][1:4096] | R | The Uncalibrated Echo Response (UER) [a(0),b(0)], [a(1),b(1)], …
Comma-separated list (1 to 4096 items) of UERComplexs, with each list item consisting of the following.
[UERComplex] Pair of 32-bit signed integers a(i),b(i) with each pair representing a complex component of the uncalibrated echo response (UER);
|
- | 2.13 |
UERScaleFactor | unsignedInt | R | The Uncalibrated Echo Response (UER) scale factor. This parameter is defined as part of the CPE SELT uncalibrated echo response (SELT-UER-R) in ITU-T Recommendation [Clause A.2.2.1/G.996.2]. Note that the scale factor is chosen such that max(abs(a(i)), abs(b(i))) over all i is equal to 2^31 - 1, which doesn’t allow UERScaleFactor to be zero. | - | 2.13 |
UERGroupSize | unsignedInt(1:2,12) | R | The Uncalibrated Echo Response (UER) group size, UER_G. In units of subcarriers. This parameter is defined as part of the CPE SELT uncalibrated echo response (SELT-UER-R) in ITU-T Recommendation [Clause A.2.2.2/G.996.2]. | - | 2.13 |
UERVar | int[0:4096] | R | Comma-separated list (0 to 4096 items) of integers. This parameter represents the variance of the UER. List items represent v(i), for values of i starting at i=0. The variance of the uncalibrated echo response for frequency i*UERGroupSizeDf is VAR(iUERGroupSize*Df) = 3 - v(i)/2 dB where Df = 4.3125 kHz. This parameter is defined as SELT variance of uncalibrated echo response R (SELT UER-VAR-R) in [Clause A.2.2.2/G.996.2]. | - | 2.13 |
Device.DSL.Diagnostics.SELTQLN. | object | R | This object contains DSL Single Ended Line Test - Physical Medium Dependent (SELT-PMD) Quiet Line Noise (QLN) diagnostics parameters. This object is for the CPE, aka the Transmission Unit - Remote end (TU-R). Reference: ITU-T Recommendation [Clause A.2, SELT-PMD management entity/G.996.2]. | - | 2.13 |
DiagnosticsState | string | W | [DiagnosticsState] Indicates the availability of diagnostics data. Enumeration of: Enumeration of:
If the ACS sets the value of this parameter to Requested, the CPE MUST initiate the corresponding diagnostic test. When writing, the only allowed values are Requested and Canceled. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set, and any errors or inconsistencies in the test parameters MUST be detected, either prior to or at the same time as (in the same SetParameterValues) setting this parameter to Requested. When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic test. When the test is completed, the value of this parameter MUST be either Complete (if the test completed successfully), or one of the Error values listed above. If the value of this parameter is anything other than Complete, the values of the results parameters for this test are indeterminate. When the diagnostic initiated by the ACS is completed (successfully or not), but not if it is canceled for any reason, the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message. After the diagnostic is complete, the value of all result parameters (all read-only parameters in this object) MUST be retained by the CPE until either this diagnostic is run again, or the CPE reboots. After a reboot, if the CPE has not retained the result parameters from the most recent test, it MUST set the value of this parameter to None. Modifying any of the writable parameters in this object except for this one MUST result in the value of this parameter being set to None. While the test is in progress, modifying any of the writable parameters in this object except for this one MUST result in the test being terminated and the value of this parameter being set to None. While the test is in progress, setting this parameter to Requested (and possibly modifying other writable parameters in this object) MUST result in the test being terminated and then restarted using the current values of the test parameters. While the test is in progress, setting this parameter to Canceled MUST result in the test being canceled and the value of this parameter being set to None. If the CPE does not support the Canceled value, it MUST return a SPV error with “Invalid Parameter value” (9007) to the ACS instead. Enumeration of:
|
- | 2.13 |
Interface | string(:256) | W | The value MUST be the Path Name of a row in the DSL.Line. table. This is the interface over which the test is to be performed. | - | 2.13 |
QLNMaxMeasurementDuration | unsignedInt(1:240) | W | This parameter is the SELT QLN maximum measurement duration (MMD) measured in seconds. This parameter is defined as SELT_QLN_MMD_R in ITU-T Recommendation [Clause A.2.1.2/G.996.2]. | - | 2.13 |
ExtendedBandwidthOperation | boolean | R | This parameter indicates if the option for extended bandwidth SELT is applied (true) or not applied (false). If the option for extended bandwidth SELT is applied to QLN, then QLNGroupSize has three valid values: 1, 2 and 12. If the option for extended bandwidth SELT is not applied to QLN, then QLNGroupSize has two valid values: 1 and 2. QLNGroupSize is reported if the option for extended bandwidth QLN SELT is supported; otherwise, reporting of the group size is optional. | - | 2.13 |
QLN | int[](:61430) | R | Comma-separated list (maximum number of characters 61430) of integers. List items represent SELT quiet line noise (QLN) per subcarrier group. Each list element is n(i), with i starting at 0. The value of QLN at frequency i*QLNGroupSizeDf with Df=4.3125 kHz is defined as QLN(iQLNGroupSize*Df) = -23 - (n(i)/2) dBm/Hz. This data format supports a QLN granularity of 0.5 dB and an dynamic range of -150 to -23 dBm/Hz. Interpretation of the SELT_QLN_R value is defined in [Clause A.2.2.3/G.996.2]. | - | 2.13 |
QLNGroupSize | unsignedInt(1:2,12) | R | This parameter represents the Quiet Line Noise (QLN) group size. In units of subcarriers. This parameter is defined as part of the SELT_QLN_R in ITU-T Recommendation [Clause A.2.2.4/G.996.2]. | - | 2.13 |
Device.DSL.Diagnostics.SELTP. | object | R | This object contains DSL Single-Ended Line Test - Processed (SELT-P) diagnostics parameters. This object is for the CPE, aka the Transmission Unit - Remote end (TU-R). Reference: ITU-T Recommendation [G.996.2]. | - | 2.13 |
DiagnosticsState | string | W | [DiagnosticsState] Indicates the availability of diagnostics data. Enumeration of: Enumeration of:
If the ACS sets the value of this parameter to Requested, the CPE MUST initiate the corresponding diagnostic test. When writing, the only allowed values are Requested and Canceled. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set, and any errors or inconsistencies in the test parameters MUST be detected, either prior to or at the same time as (in the same SetParameterValues) setting this parameter to Requested. When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic test. When the test is completed, the value of this parameter MUST be either Complete (if the test completed successfully), or one of the Error values listed above. If the value of this parameter is anything other than Complete, the values of the results parameters for this test are indeterminate. When the diagnostic initiated by the ACS is completed (successfully or not), but not if it is canceled for any reason, the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message. After the diagnostic is complete, the value of all result parameters (all read-only parameters in this object) MUST be retained by the CPE until either this diagnostic is run again, or the CPE reboots. After a reboot, if the CPE has not retained the result parameters from the most recent test, it MUST set the value of this parameter to None. Modifying any of the writable parameters in this object except for this one MUST result in the value of this parameter being set to None. While the test is in progress, modifying any of the writable parameters in this object except for this one MUST result in the test being terminated and the value of this parameter being set to None. While the test is in progress, setting this parameter to Requested (and possibly modifying other writable parameters in this object) MUST result in the test being terminated and then restarted using the current values of the test parameters. While the test is in progress, setting this parameter to Canceled MUST result in the test being canceled and the value of this parameter being set to None. If the CPE does not support the Canceled value, it MUST return a SPV error with “Invalid Parameter value” (9007) to the ACS instead. Enumeration of:
|
- | 2.13 |
Interface | string(:256) | W | The value MUST be the Path Name of a row in the DSL.Line. table. This is the interface over which the test is to be performed. | - | 2.13 |
CapacityEstimateEnabling | boolean | W | Capacity estimate calculation enabling: This parameter is expressed as a boolean and takes the value false if xDSL performance estimation is not required, true otherwise. The capacity estimate calculation enabling parameter is defined in [Clause B.2.1.1/G.996.2]. | - | 2.13 |
CapacitySignalPSD | unsignedInt[2:2][1:48] | W | The capacity estimate signal Power Spectral Density (PSD):
Comma-separated list (1 to 48 items) of PSDBreak Point Index And Levels, with each list item consisting of the following.
[PSDBreakPointIndexAndLevel] 1. the Power Spectral Density (PSD) breakpoint sub-carrier index in the range [0:49152] with Df = 4.3125 kHz frequency spacing, and
|
- | 2.13 |
CapacityNoisePSD | unsignedInt[2:2][1:48] | W | The capacity estimate noise Power Spectral Density (PSD):
Comma-separated list (1 to 48 items) of PSDBreak Point Index And Levels, with each list item consisting of the following.
[PSDBreakPointIndexAndLevel] 1. the Power Spectral Density (PSD) breakpoint sub-carrier index in the range [0:49152] with Df = 4.3125 kHz frequency spacing, and
|
- | 2.13 |
CapacityTargetMargin | unsignedInt(0:310) | W | The capacity estimate target noise margin. The range of valid values is 0 to 31 dB, in steps of 0.1 dB. This capacity estimate target noise margin parameter is defined in ITU-T Recommendation [Clause B.2.1.4/G.996.2]. | - | 2.13 |
LoopTermination | string | R | Loop termination indicator. Enumeration of:
|
- | 2.13 |
LoopLength | unsignedInt(0:16383) | R | This parameter is the loop length with units of meters. This parameter is defined as the loop length parameter LOOP_LEN in ITU-T Recommendation [Clause B.1.1.2/G.996.2]. | - | 2.13 |
LoopTopology | string[](:256) | R | Comma-separated list (maximum number of characters 256) of strings. List items represent paired parameters [LOOP_SEG_LEN, LOOP_SEG_BTAP] representing a concatenation of loop segment types, where LOOP_SEG_LEN represents the length of the segment in meters; and LOOP_SEG_BTAP is a string that identifies the segment type as either “in series” or “bridged tap”. The first loop segment in the list shall be the segment connected to the SELT-PMD block, subsequent loop segments in the list shall describe the loop in the direction toward the far-end loop termination. This Loop Topology parameter is defined in ITU-T Recommendation [Clause B.1.1.3/G.996.2]. | - | 2.13 |
AttenuationCharacteristics | unsignedInt[2:2][0:8191] | R | Specifies the list of attenuation characteristics.
Comma-separated list (0 to 8191 items) of SELTPAttenuation Characteristics Index And TFlogs, with each list item consisting of the following.
[SELTPAttenuationCharacteristicsIndexAndTFlog] 1. The paired frequency spacing index in the range [0:8191], and
|
- | 2.13 |
TFlogGroupSize | unsignedInt(1:2,12) | R | This parameter represents the Transfer Function Log (TFlog) group size. In units of subcarriers. This parameter is defined as part of the SELT attenuation characteristics, AttenuationCharacteristics, defined in ITU-T Recommendation [Clause B.1.1.6/G.996.2]. | - | 2.14 |
MissingFilter | boolean | R | Missing micro-filter or splitter: This parameter is a binary indication of a missing or incorrectly installed splitter or micro-filter at the U-R reference point. A value of true represents a missing splitter. The missing micro-filter or splitter parameter is defined in [Clause B.1.1.4/G.996.2]. | - | 2.13 |
CapacityEstimate | unsignedInt[1:2] | R | Capacity Estimate: Comma-separated list (1 to 2 items) of unsigned integers. This parameter represents the downstream and/or upstream capacity estimates in kbit/s. If only one value is supplied, then it’s not specified whether it’s the downstream value, the upstream value or some combination of the two. If two values are supplied, then the first is the downstream value and the second is the upstream value. The capacity estimate parameters are defined in [Clause B.1.1.7/G.996.2]. | - | 2.13 |
Device.FAST. | object | R | This object models FAST (defined in ITU Recommendation [G.9701]) lines. Each Line models a layer 1 FAST Line interface. | - | 2.11 |
LineNumberOfEntries | unsignedInt | R | The number of entries in the Line table. | - | 2.11 |
Device.FAST.Line.{i}. | object(0:) | R | FAST Line table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models physical FAST lines. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.11 |
Enable | boolean | W | Enables or disables the FAST line. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.11 |
Status | string | R | The current operational state of the FAST line (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.11 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
Name | string(:64) | R | The textual name of the FAST line as assigned by the CPE. | - | 2.11 |
LastChange | unsignedInt | R | The accumulated time in seconds since the FAST line entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Line is a layer 1 interface, it is expected that LowerLayers will not be used. | - | 2.11 |
Upstream | boolean | R | Indicates whether the interface points towards the Internet (true) or towards End Devices (false).
For example:
|
- | 2.11 |
FirmwareVersion | string(:64) | R | A string identifying the version of the modem firmware currently installed for this interface. This is applicable only when the modem firmware is separable from the overall CPE software. | - | 2.11 |
LinkStatus | string | R | Status of the FAST physical link. Enumeration of:
|
- | 2.11 |
AllowedProfiles | string[] | R | Comma-separated list of strings. List items indicate which FAST profiles are allowed on the line. Each list item is an enumeration of:
|
- | 2.11 |
CurrentProfile | string | R | The value MUST be a member of the list reported by the AllowedProfiles parameter, or else be an empty string. Indicates which FAST profile is currently in use on the line. | - | 2.11 |
PowerManagementState | string | R | The power management state of the line. Enumeration of:
|
- | 2.11 |
SuccessFailureCause | unsignedInt(0:5) | R | The success failure cause of the initialization. An enumeration of the following integer values:
|
- | 2.11 |
UPBOKLER | unsignedInt(0:1280) | R | This parameter reports the estimate of the electrical length expressed in 0.1 dB, as determined by the FTU-R (see clause 7.3.1.4.2.1/[G.9701]) and conveyed in the R-MSG1 initialization message (see clause 12.3.3.2.3/[G.9701]). The value is coded as an unsignedInt in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Note: This parameter is defined as UPBOKLE-R in Clause 7.10.4.2 of ITU-T Recommendation [G.997.2]. | - | 2.11 |
LastTransmittedDownstreamSignal | unsignedInt(0:21) | R | This parameter reports the downstream signal count of the last transmitted initialization signal in the last full or short initialization performed on the line. The valid values are 0..21. The downstream signal count is defined in clause 12.3.1/[G.9701]. Note: See clause 7.10.2.2 ITU-T Recommendation [G.997.2]. | - | 2.11 |
LastTransmittedUpstreamSignal | unsignedInt(0:21) | R | This parameter reports the upstream signal count of the last transmitted initialization signal in the last full or short initialization performed on the line. The valid values are 0..21. The upstream signal count is defined in clause 12.3.1/[G.9701]. Note: See clause 7.10.2.3 ITU-T Recommendation [G.997.2]. | - | 2.11 |
UPBOKLE | unsignedInt(0:1280) | R | This parameter reports the electrical length that would have been sent from the FTU-O to the FTU-R if the electrical length was not forced by the DPU-MIB. If the electrical length is not forced by the DPU-MIB, then this object reports the final electrical length, as determined by the FTU-O (see clause 7.3.1.4.2.1/[G.9701]) and conveyed in the O-UPDATE initialization message (see clause 12.3.3.2.4/[G.9701]). Note: See clause 7.10.4.1 in ITU-T Recommendation [G.997.2]. | - | 2.11 |
LineNumber | int(1:) | R | Signifies the line pair that the modem is using to connection. LineNumber = 1 is the innermost pair. | - | 2.11 |
UpstreamMaxBitRate | unsignedInt | R | This parameter reports the attainable net data rate expressed in Kbps as defined in clause 11.4.1.1.2/[G.9701]. Note: This parameter is related to the G.997.2 parameter ATTNDRus. See clause 7.11.2.1 ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
DownstreamMaxBitRate | unsignedInt | R | This parameter reports the attainable net data rate expressed in Kbps as defined in clause 11.4.1.1.2/[G.9701]. Note: This parameter is related to the G.997.2 parameter ATTNDRds. See clause 7.11.2.1 ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
UpstreamNoiseMargin | int | R | This parameter reports the signal-to-noise ratio margin (as defined in clause 9.8.3.2/[G.9701] and 11.4.1.3/[G.9701]) in the upstream direction. A special value indicates that the signal-to-noise ratio margin is out of the range to be represented. The parameter is expressed in 0.1dB. Note: In G.997.2, this parameter is called SNRMus. See ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
DownstreamNoiseMargin | int | R | This parameter reports the signal-to-noise ratio margin (as defined in clause 9.8.3.2/[G.9701] and 11.4.1.3/[G.9701]) in the upstream direction. A special value indicates that the signal-to-noise ratio margin is out of the range to be represented. The parameter is expressed in 0.1dB. Note: In G.997.2, this parameter is called SNRMds. See ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
UpstreamAttenuation | int | R | The current upstream signal loss (expressed in 0.1dB). Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
DownstreamAttenuation | int | R | The current downstream signal loss (expressed in 0.1dB). Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
UpstreamPower | int | R | The current output power at the CPE’s FAST line (expressed in 0.1dBmV). Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
DownstreamPower | int | R | The current received power at the CPE’s FAST line (expressed in 0.1dBmV). Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SNRMRMCds | int | R | This parameter reports the signal-to-noise margin for the robust management channel (RMC) in the downstream direction (express in 0.1dB). A special value (-512) indicates that the signal-to-noise ratio margin for the RMC is out of the range to be represented. This parameter is defined in clauses 7.10.12.1 of ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SNRMRMCus | int | R | This parameter reports the signal-to-noise margin for the robust management channel (RMC) in the upstream direction (express in 0.1dB). A special value (-512) indicates that the signal-to-noise ratio margin for the RMC is out of the range to be represented. This parameter is defined in clauses 7.10.12.2 of ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
BITSRMCpsds | int[](:4610) | R | Comma-separated list (maximum number of characters 4610) of integers. List items report the bit allocation values on RMC sub-carriers in RMC symbols in the downstream direction. Each pair composes of a sub-carrier index from 0..4095 and an 8 bit allocation value. There are maximum 512 pairs. This parameter is defined in clause 7.10.12.3 of ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
BITSRMCpsus | int[](:4610) | R | Comma-separated list (maximum number of characters 4610) of integers. List items report the bit allocation values on RMC sub-carriers in RMC symbols in the upstream direction. Each pair composes of a sub-carrier index from 0..4095 and an 8 bit allocation value. There are maximum 512 pairs. This parameter is defined in clause 7.10.12.4 of ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
FEXTCANCELds | boolean | R | This indicates whether FEXT cancellation in the downstream direction from all the other vectored lines into the line in the vectored group is enabled (TRUE) or disabled (FALSE). This parameter is defined as FEXT_TO_CANCEL_ENABLEds in clause 7.1.7.1 of ITU Recommendation [G.997.2]. | - | 2.11 |
FEXTCANCELus | boolean | R | This indicates whether FEXT cancellation in the upstream direction from all the other vectored lines into the line in the vectored group is enabled (TRUE) or disabled (FALSE). This parameter is defined as FEXT_TO_CANCEL_ENABLEds in clause 7.1.7.1 of ITU Recommendation [G.997.2]. | - | 2.11 |
ETRds | unsignedInt | R | This parameter reports the expected throughput rate expressed in Kbps as defined in clause 7.11.1.2 of ITU-T Recommendation [G.997.2] Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
ETRus | unsignedInt | R | This parameter reports the expected throughput rate expressed in Kbps as defined in clause 7.11.1.2 of ITU-T Recommendation [G.997.2] Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
ATTETRds | unsignedInt | R | This parameter reports the attainable expected throughput expressed in Kbps as defined in clause 7.11.2.2 of ITU-T Recommendation [G.997.2] Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
ATTETRus | unsignedInt | R | This parameter reports the attainable expected throughput expressed in Kbps as defined in clause 7.11.2.2 of ITU-T Recommendation [G.997.2] Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
MINEFTR | unsignedInt | R | This parameter reports the minimum error free throughput value expressed in Kbps computed from power up as defined in clause 11.4.1.1.3 of ITU-T Recommendation [G.9701] Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
Device.FAST.Line.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.11 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
TotalStart | unsignedInt | R | FAST-specific statistic. The Number of seconds since the beginning of the period used for collection of Total statistics. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: TotalStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
ShowtimeStart | unsignedInt | R | FAST-specific statistic. The Number of seconds since the most recent DSL Showtime - the beginning of the period used for collection of Showtime statistics. Showtime is defined as successful completion of the DSL link establishment process. The Showtime statistics are those collected since the most recent establishment of the DSL link. Note: ShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LastShowtimeStart | unsignedInt | R | FAST-specific statistic. The Number of seconds since the second most recent DSL Showtime-the beginning of the period used for collection of LastShowtime statistics. If the CPE has not retained information about the second most recent Showtime (e.g., on reboot), the start of LastShowtime statistics MAY temporarily coincide with the start of Showtime statistics. Note: LastShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
CurrentDayStart | unsignedInt | R | FAST-specific statistic. The Number of seconds since the beginning of the period used for collection of CurrentDay statistics. The CPE MAY align the beginning of each CurrentDay interval with days in the UTC time zone, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: CurrentDayStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
QuarterHourStart | unsignedInt | R | FAST-specific statistic. The Number of seconds since the beginning of the period used for collection of QuarterHour statistics. The CPE MAY align the beginning of each QuarterHour interval with real-time quarter-hour intervals, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: QuarterHourStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
Device.FAST.Line.{i}.Stats.Total. | object | R | This object contains DSL line total statistics. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.11 |
ErroredSecs | unsignedInt | R | Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SeverelyErroredSecs | unsignedInt | R | Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LOSS | unsignedInt | R | Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LORS | unsignedInt | R | Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
UAS | unsignedInt | R | Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
RTXUC | unsignedInt | R | This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
RTXTX | unsignedInt | R | This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessBSW | unsignedInt | R | This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessSRA | unsignedInt | R | This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessFRA | unsignedInt | R | This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessRPA | unsignedInt | R | This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessTIGA | unsignedInt | R | This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
Device.FAST.Line.{i}.Stats.Showtime. | object | R | This object contains FAST line statistics since the most recent showtime. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.11 |
ErroredSecs | unsignedInt | R | Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SeverelyErroredSecs | unsignedInt | R | Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LOSS | unsignedInt | R | Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LORS | unsignedInt | R | Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
UAS | unsignedInt | R | Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
RTXUC | unsignedInt | R | This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
RTXTX | unsignedInt | R | This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessBSW | unsignedInt | R | This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessSRA | unsignedInt | R | This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessFRA | unsignedInt | R | This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessRPA | unsignedInt | R | This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessTIGA | unsignedInt | R | This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
Device.FAST.Line.{i}.Stats.LastShowtime. | object | R | This object contains FAST line statistics since the second most recent showtime. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.11 |
ErroredSecs | unsignedInt | R | Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SeverelyErroredSecs | unsignedInt | R | Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LOSS | unsignedInt | R | Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LORS | unsignedInt | R | Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
UAS | unsignedInt | R | Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
RTXUC | unsignedInt | R | This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
RTXTX | unsignedInt | R | This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessBSW | unsignedInt | R | This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessSRA | unsignedInt | R | This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessFRA | unsignedInt | R | This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessRPA | unsignedInt | R | This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessTIGA | unsignedInt | R | This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
Device.FAST.Line.{i}.Stats.CurrentDay. | object | R | This object contains FAST line statistics accumulated during the current day. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.11 |
ErroredSecs | unsignedInt | R | Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SeverelyErroredSecs | unsignedInt | R | Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LOSS | unsignedInt | R | Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LORS | unsignedInt | R | Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
UAS | unsignedInt | R | Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
RTXUC | unsignedInt | R | This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
RTXTX | unsignedInt | R | This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessBSW | unsignedInt | R | This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessSRA | unsignedInt | R | This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessFRA | unsignedInt | R | This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessRPA | unsignedInt | R | This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessTIGA | unsignedInt | R | This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
Device.FAST.Line.{i}.Stats.QuarterHour. | object | R | This object contains FAST line statistics accumulated during the current quarter hour. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. | - | 2.11 |
ErroredSecs | unsignedInt | R | Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SeverelyErroredSecs | unsignedInt | R | Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LOSS | unsignedInt | R | Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
LORS | unsignedInt | R | Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
UAS | unsignedInt | R | Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
RTXUC | unsignedInt | R | This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
RTXTX | unsignedInt | R | This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessBSW | unsignedInt | R | This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessSRA | unsignedInt | R | This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessFRA | unsignedInt | R | This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessRPA | unsignedInt | R | This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SuccessTIGA | unsignedInt | R | This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
Device.FAST.Line.{i}.TestParams. | object | R | This object contains the FAST line test parameters that are available during the L0 (i.e., Showtime) state. | - | 2.11 |
SNRGds | unsignedInt | R | Reports the number of sub-carriers in any one sub-carrier group used to represent the downstream SNR(f) values. Valid values are 1, 2, 4, and 8. Note: In ITU-T G.9701-2014, the only valid value is G = 1. See clause 7.10.8.2 ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SNRGus | unsignedInt | R | Reports the number of sub-carriers in any one sub-carrier group used to represent the upstream SNR(f) values. Valid values are 1, 2, 4, and 8. Note: In ITU-T G.9701-2014, the only valid value is G = 1. See clause 7.10.8.5 ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SNRpsds | int[](:2047) | R | Comma-separated list (maximum number of characters 2047) of integers. Reports the downstream SNR(f) values. A special value indicates that no measurement could be done for this sub-carrier group because it is out of the downstream MEDLEY set or its transmit power is zero. The number of elements will depend on the value of SNRGds. Interpretation of the values is as defined in clause 11.4.1.2.2.of ITU-T Rec. [G.9701]. Note: See clause 7.10.8.3 of ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SNRpsus | string[](:2047) | R | Comma-separated list (maximum number of characters 2047) of strings. Reports the upstream SNR(f) values. A special value indicates that no measurement could be done for this sub-carrier group because it is out of the downstream MEDLEY set or its transmit power is zero. The number of elements will depend on the value of SNRGds. Interpretation of the values is as defined in clause 11.4.1.2.2.of ITU-T Rec. [G.9701]. Note: See clause 7.10.8.6 of ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SNRMTds | unsignedInt | R | Reports the number of symbols used to measure the downstream SNR(f) values. The valid values 0..65535. Note: See clause 7.10.8.1 of ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
SNRMTus | unsignedInt | R | Reports the number of symbols used to measure the upstream SNR(f) values. The valid values 0..65535. Note: See clause 7.10.8.4 of ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
ACTINP | unsignedInt | R | Reports the actual INP against SHINE as defined in clause 11.4.1.1.7/[G.9701]. A special value indicates an actual INP against SHINE of 2047 symbols or higher. The valid values are 0..2046 and 2047 is the special value. Note: See ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
NFEC | unsignedInt | R | Reports the DTU FEC codeword length (expressed in 1 byte unit) as defined in clause 9.3/[G.9701]. The valid range is 32..255. Note: See clause 7.11.4.1 ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
RFEC | int | R | Reports the DTU FEC codeword redundancy as defined in clause 9.3/[G.9701]. Note: See ITU-T Recommendation [G.997.2]. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
UpstreamCurrRate | unsignedInt | R | Reports the current physical layer aggregate data rate (expressed in Kbps) of the upstream FAST as defined in clause 11.4.1.1.1/[G.9701]. The current physical layer aggregate data rate (expressed in Kbps) of the upstream FAST connection. The valid values are 0..4294967295(0 to 232-1 kbit/s). Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
DownstreamCurrRate | unsignedInt | R | Reports the current physical layer aggregate data rate (expressed in Kbps) of the upstream FAST as defined in clause 11.4.1.1.1/[G.9701]. The current physical layer aggregate data rate (expressed in Kbps) of the downstream FAST connection. The valid values are 0..4294967295(0 to 232-1 kbit/s). Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
ACTINPREIN | unsignedInt | R | Reports the actual INP against REIN as defined in clause 11.4.1.1.8/[G.9701]. A special value indicates an actual INP against REIN of 63 symbols or higher. The valid range is 0..62 symbols, and 63 is the special value. Active Notification requests for this parameter MAY be denied. |
- | 2.11 |
Device.Optical. | object | R | This object models optical interface technologies. It defines an Interface object that models a layer 1 optical interface that is capable of transporting Ethernet packets. The data model definition is based on parts of [G.988]. | - | 2.4 |
InterfaceNumberOfEntries | unsignedInt | R | The number of entries in the Interface table. | - | 2.4 |
Device.Optical.Interface.{i}. | object(0:) | R | Optical interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models physical optical interfaces. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.4 |
Enable | boolean | W | Enables or disables the optical interface. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.4 |
Status | string | R | The current operational state of the optical interface (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.4 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
|
- | 2.4 |
Name | string(:64) | R | The textual name of the optical interface as assigned by the CPE. | - | 2.4 |
LastChange | unsignedInt | R | The accumulated time in seconds since the optical interface entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. | - | 2.4 |
Upstream | boolean | R | Indicates whether the interface points towards the Internet (true) or towards End Devices (false).
For example:
|
- | 2.4 |
OpticalSignalLevel | int | R | Current measurement of total downstream optical signal level. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -65.536 dBm (coded as -65536), to 65.534 dBm (coded as 65534) in 0.002 dB increments. This parameter is based on Optical signal level from [Section 9.2.1/G.988]. | - | 2.4 |
LowerOpticalThreshold | int | R | Optical level that is used to declare the downstream low received optical power alarm. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -127.5 dBm (coded as -127500) to 0 dBm (coded as 0) in 0.5 dB increments. The value -127500 indicates the device’s internal policy. This parameter is based on Lower optical threshold from [Section 9.2.1/G.988]. | - | 2.4 |
UpperOpticalThreshold | int | R | Optical level that is used to declare the downstream high received optical power alarm. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -127.5 dBm (coded as -127500) to 0 dBm (coded as 0) in 0.5 dB increments. The value -127500 indicates the device’s internal policy. This parameter is based on Upper optical threshold from [Section 9.2.1/G.988]. | - | 2.4 |
TransmitOpticalLevel | int | R | Current measurement of mean optical launch power. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -65.536 dBm (coded as -65536), to 65.534 dBm (coded as 65534) in 0.002 dB increments. This parameter is based on Transmit optical level from [Section 9.2.1/G.988]. | - | 2.4 |
LowerTransmitPowerThreshold | int | R | Minimum mean optical launch power that is used to declare the low transmit optical power alarm. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -63.5 dBm (coded as -63500) to +63.5 dBm (coded as 63500) in 0.5 dB increments. The value -63500 indicates the device’s internal policy. This parameter is based on Lower transmit power threshold from [Section 9.2.1/G.988]. | - | 2.4 |
UpperTransmitPowerThreshold | int | R | Maximum mean optical launch power that is used to declare the high transmit optical power alarm. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -63.5 dBm (coded as -63500) to +63.5 dBm (coded as 63500) in 0.5 dB increments. The value -63500 indicates the device’s internal policy. This parameter is based on Upper transmit power threshold from [Section 9.2.1/G.988]. | - | 2.4 |
Device.Optical.Interface.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.4 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
Device.Cellular. | object | R | This object models cellular interfaces and access points. | - | 2.8 |
RoamingEnabled | boolean | W | Enables or disables roaming. | - | 2.8 |
RoamingStatus | string | R | Current roaming status. Enumeration of:
|
- | 2.8 |
InterfaceNumberOfEntries | unsignedInt | R | The number of entries in the Interface table. | - | 2.8 |
AccessPointNumberOfEntries | unsignedInt | R | The number of entries in the AccessPoint table. | - | 2.8 |
Device.Cellular.Interface.{i}. | object(0:) | R | Cellular interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each instance of this object models a cellular modem with a single radio and a single USIM. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.8 |
Enable | boolean | W | Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.8 |
Status | string | R | The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:
Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
|
- | 2.8 |
Name | string(:64) | R | The textual name of the interface as assigned by the CPE. | - | 2.8 |
LastChange | unsignedInt | R | The accumulated time in seconds since the interface entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. | - | 2.8 |
Upstream | boolean | R | Indicates whether the interface points towards the Internet (true) or towards End Devices (false).
For example:
|
- | 2.8 |
IMEI | string(15) | R | International Mobile Station Equipment Identity number, represented as a 15 digit string (digits 0-9). Possible patterns:
|
- | 2.8 |
SupportedAccessTechnologies | string[] | R | Comma-separated list of strings. Access technologies supported by the interface. Each list item is an enumeration of:
|
- | 2.8 |
PreferredAccessTechnology | string | W | The value MUST be a member of the list reported by the SupportedAccessTechnologies parameter, or else be Auto. Preferred access technology. The factory default value MUST be Auto. |
- | 2.8 |
CurrentAccessTechnology | string | R | The value MUST be a member of the list reported by the SupportedAccessTechnologies parameter. Access technology that is currently in use. | - | 2.8 |
AvailableNetworks | string(:64)[] | R | Comma-separated list of strings (maximum number of characters per item 64). List of available networks. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
NetworkRequested | string(:64) | W | Name of the network which will be used, or an empty string if the network is selected automatically. The factory default value MUST be an empty string. |
- | 2.8 |
NetworkInUse | string(:64) | R | The value MUST be a member of the list reported by the AvailableNetworks parameter, or else be an empty string. The value is an empty string if no network is found, or if the network specified in NetworkRequested is not found. | - | 2.8 |
RSSI | int | R | The received signal strength in dBm. The allowed values depend on CurrentAccessTechnology:
Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
RSRP | int | R | The Reference Signal Received Power in dBm for LTE, NR values of CurrentAccessTechnology:
Active Notification requests for this parameter MAY be denied. |
- | 2.14 |
RSRQ | int | R | The Reference Signal Received Quality in dBm for LTE, NR values of CurrentAccessTechnology:
Active Notification requests for this parameter MAY be denied. |
- | 2.14 |
UpstreamMaxBitRate | unsignedInt | R | The current maximum attainable data rate upstream (expressed in Kbps). | - | 2.8 |
DownstreamMaxBitRate | unsignedInt | R | The current maximum attainable data rate downstream (expressed in Kbps). | - | 2.8 |
Device.Cellular.Interface.{i}.USIM. | object | R | USIM (Universal Subscriber Identity Module or SIM card) parameters for the interface. | - | 2.8 |
Status | string | R | The current status of the USIM card. Enumeration of:
|
- | 2.8 |
IMSI | string(14:15) | R | International Mobile Subscriber Identity represented as a string with either 14 or 15 digits (digits 0-9). The first 3 digits are the mobile country code (MCC), which are followed by the mobile network code (MNC), either 2 digits (European standard) or 3 digits (North American standard), followed by the mobile subscription identification number (MSIN). Possible patterns:
|
- | 2.8 |
ICCID | string(6:20) | R | Integrated Circuit Card Identifier represented as a string of up to 20 digits (digits 0-9). The number is composed of the following parts:
Possible patterns:
|
- | 2.8 |
MSISDN | string(14:15) | R | Mobile Subscriber Integrated Service Digital Network Number, a number uniquely identifying a subscription in a GSM, UMTS, or LTE mobile network. [ITU-E.164] Possible patterns:
|
- | 2.8 |
PINCheck | string | W | Controls the PIN verification of the USIM card. Enumeration of:
|
- | 2.8 |
PIN | string(:4) | W | Allows the Controller to change the USIM PIN used for SIM card activation. When read, this parameter returns an empty string, regardless of the actual value. |
- | 2.8 |
Device.Cellular.Interface.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.8 |
BytesSent | unsignedLong | R | [StatsCounter64] The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BytesReceived | unsignedLong | R | [StatsCounter64] The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
PacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
PacketsReceived | unsignedLong | R | [StatsCounter64] The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
ErrorsSent | unsignedLong | R | [StatsCounter64] The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
ErrorsReceived | unsignedLong | R | [StatsCounter64] The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
UnicastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
UnicastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
DiscardPacketsSent | unsignedLong | R | [StatsCounter64] The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
DiscardPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
MulticastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
MulticastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BroadcastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BroadcastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
UnknownProtoPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
Device.Cellular.AccessPoint.{i}. | object(0:) | W | Cellular Access Point table. Each entry is identified by an APN (Access Point Name) that identifies a gateway between the mobile network and another computer network. At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries. At most one enabled entry in this table can exist with a given value for APN, or with a given value for Interface. |
- | 2.8 |
Enable | boolean | W | Enables or disables the Access Point. | - | 2.8 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
The Agent MUST choose an initial value that doesn’t conflict with any existing entries. |
- | 2.8 |
APN | string(:64) | W | Access Point Name. | - | 2.8 |
Username | string(:256) | W | Username used to authenticate the CPE when making a connection to the Access Point. | - | 2.8 |
Password | string(:256) | W | Password used to authenticate the CPE when making a connection to the Access Point. When read, this parameter returns an empty string, regardless of the actual value. |
- | 2.8 |
Proxy | string(:45) | W | [IPAddress] Proxy server IP address. | - | 2.8 |
ProxyPort | unsignedInt(1:65535) | W | Proxy server port. | - | 2.8 |
Interface | string | W | The value MUST be the Path Name of a row in the Cellular.Interface. table. Reference to the interface with which the access point is associated. | - | 2.8 |
Device.ATM. | object | R | Asynchronous Transfer Mode (ATM) object that contains the Link interface and Diagnostics.F5Loopback diagnostics. | - | 2.0 |
LinkNumberOfEntries | unsignedInt | R | The number of entries in the Link table. | - | 2.0 |
Device.ATM.Link.{i}. | object(0:) | W | ATM link-layer table (a stackable interface object as described in [Section 4.2/TR-181i2]). Models an ATM PVC virtual circuit and the ATM Adaption Layer (AAL). An ATM Link entry is typically stacked on top of either a DSL.Channel. or a DSL.BondingGroup. object. When an ATM Link interface is used, a lower-layer DSL.Channel interface MUST be configured with ATM encapsulation (see DSL.Channel.{i}.LinkEncapsulationUsed). At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias, or with a given value for Name. On creation of a new table entry, the Agent MUST choose initial values for Alias and Name such that the new entry does not conflict with any existing entries. |
- | 2.0 |
Enable | boolean | W | Enables or disables the link. This parameter is based on ifAdminStatus from [RFC2863]. | false | 2.0 |
Status | string | R | The current operational state of the link (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
Down | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
The Agent MUST choose an initial value that doesn’t conflict with any existing entries. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the link as assigned by the CPE. The Agent MUST choose an initial value that doesn’t conflict with any existing entries. |
- | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the link entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. | <Empty> | 2.0 |
LinkType | string | W | Indicates the type of connection and refers to the complete stack of protocol used for this connection. Enumeration of: |
- | 2.0 |
AutoConfig | boolean | R | Indicates if the CPE is currently using some auto configuration mechanisms for this connection. If this variable is true, all writable variables in this connection instance become read-only. Any attempt to change one of these variables SHOULD fail and an error SHOULD be returned. | - | 2.0 |
DestinationAddress | string(:256) | W | Destination address of this link, in the form “VPI/VCI” (e.g. “8/23” or “0/35”). Possible patterns:
|
- | 2.0 |
Encapsulation | string | W | Identifies the connection encapsulation that will be used. Enumeration of:
|
- | 2.0 |
FCSPreserved | boolean | W | This flag tells if a checksum SHOULD be added in the ATM payload. It does not refer to the checksum of one of the ATM cells or AALX packets. In case of LLC or VCMUX encapsulation, this ATM checksum is the FCS field described in [RFC2684]. It is only applicable in the upstream direction. | - | 2.0 |
VCSearchList | string[](:256) | W | Comma-separated list (maximum number of characters 256) of strings. Ordered list of VPI/VCI pairs to search if a link using the DestinationAddress cannot be established. In the form “VPI1/VCI1, VPI2/VCI2, …”. Each list item matches one of:
0/35, 8/35, 1/35 |
- | 2.0 |
AAL | string | R | Describes the ATM Adaptation Layer (AAL) currently in use on the PVC. Enumeration of:
|
- | 2.0 |
Device.ATM.Link.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsSent | unsignedLong | R | The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnknownProtoPacketsReceived | unsignedInt | R | The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
TransmittedBlocks | unsignedInt | R | The current count of successfully transmitted cells. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ReceivedBlocks | unsignedInt | R | The current count of successfully received cells. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
CRCErrors | unsignedInt | R | Count of the ATM layer cyclic redundancy check (CRC) errors. This refers to CRC errors at the ATM adaptation layer (AAL). The AAL in use is indicated by the AAL parameter. The value of the CRCErrors parameter MUST be 0 for AAL types that have no CRCs. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
HECErrors | unsignedInt | R | Count of the number of Header Error Check related errors at the ATM layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.ATM.Link.{i}.QoS. | object | R | The ATM Link QoS object. | - | 2.0 |
QoSClass | string | W | Describes the ATM Quality Of Service (QoS) being used on the VC. Enumeration of:
|
- | 2.0 |
PeakCellRate | unsignedInt | W | Specifies the upstream peak cell rate in cells per second. | - | 2.0 |
MaximumBurstSize | unsignedInt | W | Specifies the upstream maximum burst size in cells. | - | 2.0 |
SustainableCellRate | unsignedInt | W | Specifies the upstream sustainable cell rate, in cells per second. | - | 2.0 |
Device.ATM.Diagnostics. | object | R | The ATM Diagnostics object. | - | 2.0 |
Device.ATM.Diagnostics.F5Loopback. | object | R | This object provides access to an ATM-layer F5 OAM loopback test. | - | 2.0 |
DiagnosticsState | string | W | [DiagnosticsState] Indicates the availability of diagnostics data. Enumeration of: Enumeration of:
If the ACS sets the value of this parameter to Requested, the CPE MUST initiate the corresponding diagnostic test. When writing, the only allowed values are Requested and Canceled. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set, and any errors or inconsistencies in the test parameters MUST be detected, either prior to or at the same time as (in the same SetParameterValues) setting this parameter to Requested. When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic test. When the test is completed, the value of this parameter MUST be either Complete (if the test completed successfully), or one of the Error values listed above. If the value of this parameter is anything other than Complete, the values of the results parameters for this test are indeterminate. When the diagnostic initiated by the ACS is completed (successfully or not), but not if it is canceled for any reason, the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message. After the diagnostic is complete, the value of all result parameters (all read-only parameters in this object) MUST be retained by the CPE until either this diagnostic is run again, or the CPE reboots. After a reboot, if the CPE has not retained the result parameters from the most recent test, it MUST set the value of this parameter to None. Modifying any of the writable parameters in this object except for this one MUST result in the value of this parameter being set to None. While the test is in progress, modifying any of the writable parameters in this object except for this one MUST result in the test being terminated and the value of this parameter being set to None. While the test is in progress, setting this parameter to Requested (and possibly modifying other writable parameters in this object) MUST result in the test being terminated and then restarted using the current values of the test parameters. While the test is in progress, setting this parameter to Canceled MUST result in the test being canceled and the value of this parameter being set to None. If the CPE does not support the Canceled value, it MUST return a SPV error with “Invalid Parameter value” (9007) to the ACS instead. Enumeration of:
|
- | 2.0 |
Interface | string(:256) | W | The value MUST be the Path Name of a row in the ATM.Link. table. This is the interface over which the test is to be performed. | - | 2.0 |
NumberOfRepetitions | unsignedInt(1:) | W | Number of repetitions of the ping test to perform before reporting the results. | - | 2.0 |
Timeout | unsignedInt(1:) | W | Timeout in milliseconds for the ping test. | - | 2.0 |
SuccessCount | unsignedInt | R | Result parameter indicating the number of successful pings (those in which a successful response was received prior to the timeout) in the most recent ping test. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
FailureCount | unsignedInt | R | Result parameter indicating the number of failed pings in the most recent ping test. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
AverageResponseTime | unsignedInt | R | Result parameter indicating the average response time in milliseconds over all repetitions with successful responses of the most recent ping test. If there were no successful responses, this value MUST be zero. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MinimumResponseTime | unsignedInt | R | Result parameter indicating the minimum response time in milliseconds over all repetitions with successful responses of the most recent ping test. If there were no successful responses, this value MUST be zero. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MaximumResponseTime | unsignedInt | R | Result parameter indicating the maximum response time in milliseconds over all repetitions with successful responses of the most recent ping test. If there were no successful responses, this value MUST be zero. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.PTM. | object | R | Packet Transfer Mode ([Annex H/G.993.1]). This object contains the Link interface. | - | 2.0 |
LinkNumberOfEntries | unsignedInt | R | The number of entries in the Link table. | - | 2.0 |
Device.PTM.Link.{i}. | object(0:) | W | PTM link-layer table (a stackable interface object as described in [Section 4.2/TR-181i2]). Models a layer 2 variable-sized packet interface. A PTM Link entry is typically stacked on top of either a FAST.Line., DSL.Channel., or a DSL.BondingGroup. object. When a PTM Link interface is used, a lower-layer DSL.Channel interface MUST be configured with PTM encapsulation (see DSL.Channel.{i}.LinkEncapsulationUsed). At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias, or with a given value for Name. On creation of a new table entry, the Agent MUST choose initial values for Alias and Name such that the new entry does not conflict with any existing entries. |
- | 2.0 |
Enable | boolean | W | Enables or disables the link. This parameter is based on ifAdminStatus from [RFC2863]. | false | 2.0 |
Status | string | R | The current operational state of the link (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
Down | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
The Agent MUST choose an initial value that doesn’t conflict with any existing entries. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the link as assigned by the CPE. The Agent MUST choose an initial value that doesn’t conflict with any existing entries. |
- | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the link entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. | <Empty> | 2.0 |
MACAddress | string(:17) | R | [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. | - | 2.0 |
Device.PTM.Link.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsSent | unsignedLong | R | The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnknownProtoPacketsReceived | unsignedInt | R | The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.Ethernet. | object | R | Ethernet object. This object models several Ethernet interface objects, each representing a different stack layer, including: Interface, Link, and VLANTermination. Interface is media-specific and models a port, the PHY layer, and the MAC layer. Link is media-independent and models the Logical Link Control (LLC) layer. An “outer” VLANTermination, when present, is expected to be stacked on top of Link objects to receive and send frames with a configured VLANID. | - | 2.0 |
WoLSupported | boolean | R | Indicates that WoL (Wake on LAN) over Ethernet is supported. | - | 2.13 |
FlowControlSupported | boolean | R | Indicates that Flow Control over Ethernet is supported, as per [802.3-2015]. | - | 2.14 |
InterfaceNumberOfEntries | unsignedInt | R | The number of entries in the Interface table. | - | 2.0 |
LinkNumberOfEntries | unsignedInt | R | The number of entries in the Link table. | - | 2.0 |
VLANTerminationNumberOfEntries | unsignedInt | R | The number of entries in the VLANTermination table. | - | 2.0 |
RMONStatsNumberOfEntries | unsignedInt | R | The number of entries in the RMONStats table. | - | 2.4 |
LAGNumberOfEntries | unsignedInt | R | The number of entries in the LAG table. | - | 2.12 |
Device.Ethernet.Interface.{i}. | object(0:) | R | Ethernet interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models physical Ethernet ports, but in terms of the interface stack it also models the PHY and MAC level Ethernet interface. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.0 |
Enable | boolean | W | Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.0 |
Status | string | R | The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the interface as assigned by the CPE. | - | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the interface entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. | - | 2.0 |
Upstream | boolean | R | Indicates whether the interface points towards the Internet (true) or towards End Devices (false).
For example:
|
- | 2.0 |
MACAddress | string(:17) | R | [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. | - | 2.0 |
MaxBitRate | int(-1:) | W | The maximum upstream and downstream PHY bit rate supported by this interface (expressed in Mbps). A value of -1 indicates automatic selection of the maximum bit rate. | - | 2.0 |
CurrentBitRate | unsignedInt | R | The current upstream and downstream PHY bit rate on this interface (expressed in Mbps). A value of 0 indicates that the current bit rate is unknown. Active Notification requests for this parameter MAY be denied. |
- | 2.7 |
DuplexMode | string | W | The duplex mode available to this connection. Enumeration of:
|
- | 2.0 |
EEECapability | boolean | R | Indicates whether this physical ethernet port supports Energy Efficient Ethernet as specified in [Section 78/802.3-2012_section6]. | - | 2.8 |
EEEEnable | boolean | W | Whether Energy Efficient Ethernet [Section 78/802.3-2012_section6] support is currently enabled. When enabled, this ethernet port will be capable of entering or exiting Low Power Idle (LPI) mode. | - | 2.8 |
Device.Ethernet.Interface.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsSent | unsignedLong | R | The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnknownProtoPacketsReceived | unsignedInt | R | The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.Ethernet.Link.{i}. | object(0:) | W | Ethernet link layer table (a stackable interface object as described in [Section 4.2/TR-181i2]). Table entries model the Logical Link Control (LLC) layer. It is expected that an Ethernet Link interface can be stacked above any lower-layer interface object capable of carrying Ethernet frames. At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias, or with a given value for Name. On creation of a new table entry, the Agent MUST choose initial values for Alias and Name such that the new entry does not conflict with any existing entries. At most one enabled entry in this table can exist with a given value for MACAddress. |
- | 2.0 |
Enable | boolean | W | Enables or disables the link. This parameter is based on ifAdminStatus from [RFC2863]. | false | 2.0 |
Status | string | R | The current operational state of the link (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
Down | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
The Agent MUST choose an initial value that doesn’t conflict with any existing entries. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the link as assigned by the CPE. The Agent MUST choose an initial value that doesn’t conflict with any existing entries. |
- | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the link entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. | <Empty> | 2.0 |
MACAddress | string(:17) | R | [MACAddress] The MAC address used for packets sent via this interface. Provides the source MAC address for outgoing traffic and the destination MAC address for incoming traffic. | - | 2.0 |
PriorityTagging | boolean | W | Enables or disables priority tagging on this Ethernet Link. When true, egress frames leaving this interface will be priority tagged with the frame’s associated priority value, which will either be derived directly from the ingress frame or else set via QoS.Classification.{i}.EthernetPriorityMark or QoS.Classification.{i}.InnerEthernetPriorityMark. When false, egress frames leaving this interface will be untagged. The parameter does not affect reception of ingress frames. | false | 2.0 |
FlowControl | boolean | W | Configures Flow Control on given Ethernet port. When set to true, it activates the exchange of pause-resume flow control frames. | false | 2.14 |
Device.Ethernet.Link.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsSent | unsignedLong | R | The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnknownProtoPacketsReceived | unsignedInt | R | The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.Ethernet.VLANTermination.{i}. | object(0:) | W | VLAN Termination table (a stackable interface object as described in [Section 4.2/TR-181i2]). A VLAN Termination entry is typically stacked on top of a Link object to receive and send frames with the configured VLANID. At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias, or with a given value for Name. On creation of a new table entry, the Agent MUST choose initial values for Alias and Name such that the new entry does not conflict with any existing entries. |
- | 2.0 |
Enable | boolean | W | Enables or disables the VLANTermination entry. This parameter is based on ifAdminStatus from [RFC2863]. | false | 2.0 |
Status | string | R | The current operational state of the VLANTermination entry (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
Down | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
The Agent MUST choose an initial value that doesn’t conflict with any existing entries. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the VLANTermination entry as assigned by the CPE. The Agent MUST choose an initial value that doesn’t conflict with any existing entries. |
- | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the VLANTermination entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. | <Empty> | 2.0 |
VLANID | unsignedInt(1:4094) | W | The VLAN ID for this VLANTermination entry (as defined in [802.1Q-2011]). Only ingress frames with this VLAN ID will be passed to higher protocol layers; frames sent from higher protocol layers will be tagged with this VLAN ID. | - | 2.0 |
TPID | unsignedInt | W | The Tag Protocol Identifier (TPID) assigned to this VLANTermination. The TPID is an EtherType value used to identify the frame as a tagged frame. Standard [Table 9.1/802.1Q-2011] TPID values are: *S-TAG 0x88A8 = 34984 *C-TAG 0x8100 = 33024 Non-Standard TPID values are: *S-TAG 0x9100 = 37120 | 33024 | 2.7 |
Device.Ethernet.VLANTermination.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsSent | unsignedLong | R | The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnknownProtoPacketsReceived | unsignedInt | R | The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.Ethernet.RMONStats.{i}. | object(0:) | W | Ethernet statistics based on the [RFC2819] RMON-MIB etherStatsTable, with some extensions inspired by [Section 9.3.32/G.988]. Each instance is associated with an interface capable of transporting Ethernet-encapsulated packets, and contains a set of unidirectional Ethernet statistics. The statistics are sampled either on ingress or on egress. This is determined as follows:
At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries. At most one enabled entry in this table can exist with the same values for all of Interface, VLANID and Queue. |
- | 2.4 |
Enable | boolean | W | Enables or disables this instance. | false | 2.4 |
Status | string | R | The status of this instance. Enumeration of:
|
Disabled | 2.4 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
The Agent MUST choose an initial value that doesn’t conflict with any existing entries. |
- | 2.4 |
Name | string(:64) | R | The textual name of the RMONStats entry as assigned by the CPE. | - | 2.4 |
Interface | string | W | The interface associated with this instance. The value MUST be the Path Name of an interface that is capable of transporting Ethernet-encapsulated packets. The term “capable of transporting Ethernet-encapsulated packets” means “has an Ethernet header” and therefore refers to any interface that is at or below an Ethernet.Link instance in the interface stack. | <Empty> | 2.4 |
VLANID | unsignedInt(0:4094) | W | Filter criterion. The VLAN ID for which statistics are to be collected. A zero value indicates that all packets, whether or not they have a VLAN header, will be considered. A non-zero value indicates that only packets that have the the specified VLAN ID will be considered. | 0 | 2.4 |
Queue | string | W | The value MUST be the Path Name of a row in the Device.QoS.Queue. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. Filter criterion. The egress queue with which this instance is associated. Only packets that are sent to the referenced queue will be considered. | <Empty> | 2.4 |
AllQueues | boolean | W | Indicates whether this instance applies to all queues. If true, the value of Queue is ignored since all egress queues are indicated. | false | 2.4 |
DropEvents | unsignedInt | R | The total number of events in which packets were dropped due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected. This parameter is based on etherStatsDropEvents from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
Bytes | unsignedLong | R | The total number of bytes (including those in bad packets) received (excluding framing bits but including FCS bytes). This parameter is based on etherStatsOctets from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
Packets | unsignedLong | R | The total number of packets (including bad packets, broadcast packets, and multicast packets) received. This parameter is based on etherStatsPkts from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
BroadcastPackets | unsignedLong | R | The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets. This parameter is based on etherStatsBroadcastPkts from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
MulticastPackets | unsignedLong | R | The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address. This parameter is based on etherStatsMulticastPkts from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
CRCErroredPackets | unsignedInt | R | The total number of packets received that had a length (excluding framing bits, but including FCS bytes) of between 64 and 1518 bytes, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of bytes (FCS Error) or a bad FCS with a non-integral number of bytes (Alignment Error). This parameter is based on etherStatsCRCAlignErrors from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
UndersizePackets | unsignedInt | R | The total number of packets received that were less than 64 bytes long (excluding framing bits, but including FCS bytes) and were otherwise well formed. This parameter is based on etherStatsUndersizePkts from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
OversizePackets | unsignedInt | R | The total number of packets received that were longer than 1518 bytes (excluding framing bits, but including FCS bytes) and were otherwise well formed. This parameter is based on etherStatsOversizePkts from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
Packets64Bytes | unsignedLong | R | The total number of packets (including bad packets) received that were 64 bytes in length (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts64Octets from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
Packets65to127Bytes | unsignedLong | R | The total number of packets (including bad packets) received that were between 65 and 127 bytes in length inclusive (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts65to127Octets from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
Packets128to255Bytes | unsignedLong | R | The total number of packets (including bad packets) received that were between 128 and 255 bytes in length inclusive (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts6128to255Octets from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
Packets256to511Bytes | unsignedLong | R | The total number of packets (including bad packets) received that were between 256 and 511 bytes in length inclusive (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts256to511Octets from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
Packets512to1023Bytes | unsignedLong | R | The total number of packets (including bad packets) received that were between 512 and 1023 bytes in length inclusive (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts512to1023Octets from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
Packets1024to1518Bytes | unsignedLong | R | The total number of packets (including bad packets) received that were between 1024 and 1518 bytes in length inclusive (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts1024to1518Octets from [RFC2819]. Active Notification requests for this parameter MAY be denied. |
0 | 2.4 |
Device.Ethernet.WoL. | object | R | This object provides access to the WoL (Wake on LAN) funtionality. | - | 2.13 |
SendMagicPacket | boolean | W | When set to true, the CPE must send a magic packet over its active Ethernet interfaces. | - | 2.13 |
MACAddress | string(:17) | W | [MACAddress] MAC address target of the magic packet. | - | 2.13 |
Password | string | W | The SecureOn password. The parameter value can be empty or, if present, can contain either 4 bytes or 6 bytes. | - | 2.13 |
Device.Ethernet.LAG.{i}. | object(0:) | W | Ethernet Link Aggregation Group (LAG) table (a stackable interface object as described in [Section 4.2/TR-181i2]). Table entries model the Link Aggregation Sub-Layer as defined in [802.3-2015] and [802.1AX-2014]. It is expected that a LAG interface can only be stacked above Ethernet.Interface interfaces. The CPE can reject creation of additional LAG instances if this would exceed its capabilities. At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias, or with a given value for Name. On creation of a new table entry, the Agent MUST choose initial values for Alias and Name such that the new entry does not conflict with any existing entries. At most one enabled entry in this table can exist with a given value for MACAddress. |
- | 2.12 |
Enable | boolean | W | Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.12 |
Status | string | R | The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.12 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
The Agent MUST choose an initial value that doesn’t conflict with any existing entries. |
- | 2.12 |
Name | string(:64) | R | The textual name of the LAG interface as assigned by the CPE. The Agent MUST choose an initial value that doesn’t conflict with any existing entries. |
- | 2.12 |
LastChange | unsignedInt | R | The accumulated time in seconds since the interface entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string.. See [Section 4.2.1/TR-181i2]. LowerLayers must reference to Device.Ethernet.Interface instances where Link Aggregation Group is configured by the CPE. For example, “Device.Ethernet.Interface.1, Device.Ethernet.Interface.2” | - | 2.12 |
MACAddress | string(:17) | W | [MACAddress] MAC address of the Link Aggregation Interface. | - | 2.12 |
Device.Ethernet.LAG.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.12 |
BytesSent | unsignedLong | R | [StatsCounter64] The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
BytesReceived | unsignedLong | R | [StatsCounter64] The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
PacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
PacketsReceived | unsignedLong | R | [StatsCounter64] The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
ErrorsSent | unsignedInt | R | [StatsCounter32] The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
ErrorsReceived | unsignedInt | R | [StatsCounter32] The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
UnicastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
UnicastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
DiscardPacketsSent | unsignedInt | R | [StatsCounter32] The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
DiscardPacketsReceived | unsignedInt | R | [StatsCounter32] The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
MulticastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
MulticastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
BroadcastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
BroadcastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
UnknownProtoPacketsReceived | unsignedInt | R | [StatsCounter32] The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.12 |
Device.USB. | object | R | Universal Serial Bus ([USB1.0], [USB2.0], [USB3.0]). This object contains the Interface, Port, and USBHosts objects. | - | 2.0 |
InterfaceNumberOfEntries | unsignedInt | R | The number of entries in the Interface table. | - | 2.0 |
PortNumberOfEntries | unsignedInt | R | The number of entries in the Port table. | - | 2.0 |
Device.USB.Interface.{i}. | object(0:) | R | USB interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models master and slave USB physical interfaces that support carrying Ethernet frames, e.g. via the USB Communication Device Class. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.0 |
Enable | boolean | W | Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.0 |
Status | string | R | The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the interface as assigned by the CPE. | - | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the interface entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. | - | 2.0 |
Upstream | boolean | R | Indicates whether the interface points towards the Internet (true) or towards End Devices (false).
For example:
|
- | 2.0 |
MACAddress | string(:17) | R | [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. | - | 2.0 |
MaxBitRate | unsignedInt | R | The maximum PHY bit rate supported by this interface (expressed in Mbps). | - | 2.0 |
Port | string(:256) | R | The value MUST be the Path Name of a row in the Port. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. This is the USB port associated with this interface object. | - | 2.0 |
Device.USB.Interface.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsSent | unsignedLong | R | The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnknownProtoPacketsReceived | unsignedInt | R | The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.USB.Port.{i}. | object(0:) | R | USB Port table. This table models master and slave USB physical ports on the device. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the port. | - | 2.0 |
Standard | string(:4) | R | USB specification version supported by the Port. Example: “1.1” | - | 2.0 |
Type | string | R | Type of the USB connection. Enumeration of:
|
- | 2.0 |
Receptacle | string | R | Receptacle of the port. Enumeration of:
|
- | 2.0 |
Rate | string | R | Current speed of the USB connection. Enumeration of: |
- | 2.0 |
Power | string | R | Power configuration of the USB connection. Enumeration of: |
- | 2.0 |
Device.USB.USBHosts. | object | R | This object models the CPE’s USB Host controllers. See [Appendix XVII/TR-181i2] for Theory of Operation. | - | 2.0 |
HostNumberOfEntries | unsignedInt | R | The number of entries in the Host table. | - | 2.0 |
Device.USB.USBHosts.Host.{i}. | object(0:) | R | Table of CPE USB Host controllers. At most one entry in this table can exist with a given value for Name, or with a given value for Alias. |
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.3 |
Enable | boolean | W | Enables or disables the USB Host controller. | - | 2.0 |
Name | string(:64) | R | User-readable host controller name. | - | 2.0 |
Type | string | R | Type of USB Host Enumeration of:
|
- | 2.0 |
Reset | boolean | W | When set to true, reset the Host Controller and apply the reset signaling (see [Chapter 7.1.7.5/USB2.0]) to all of the Host Controller Hub downstream ports. The value is not saved in the device’s state and setting it to false has no effect. | - | 2.0 |
PowerManagementEnable | boolean | W | When set to true, PowerManagementEnable enables the Host Controller to invoke Power Management policy, i.e. controlled Suspend (see [USB2.0], Chapters 4.3.2, 7.1.7.6, and 11.9). When set to false PowerManagementEnable immediately disables the Host controller Power Management policy. | - | 2.0 |
USBVersion | string(:4) | R | USB specification version with which the controller complies. Example: “1.1” | - | 2.0 |
DeviceNumberOfEntries | unsignedInt | R | The number of entries in the Device table. | - | 2.0 |
Device.USB.USBHosts.Host.{i}.Device.{i}. | object(0:) | R | Table of connected USB devices. At most one entry in this table can exist with a given value for DeviceNumber. |
- | 2.0 |
DeviceNumber | unsignedInt | R | Device number on USB bus. | - | 2.0 |
USBVersion | string(:4) | R | USB specification version with which the device complies. Example: “1.1” | - | 2.0 |
DeviceClass | hexBinary(:1) | R | Class Code as assigned by USB-IF. When 0x00, each device specifies its own class code. When 0xFF, the class code is vendor specified. | - | 2.0 |
DeviceSubClass | hexBinary(:1) | R | Subclass code (assigned by USB-IF). | - | 2.0 |
DeviceVersion | unsignedInt(:65535) | R | Device release number. | - | 2.0 |
DeviceProtocol | hexBinary(:1) | R | Protocol code (assigned by USB-IF). | - | 2.0 |
ProductID | unsignedInt(:65535) | R | Product ID (assigned by manufacturer). | - | 2.0 |
VendorID | unsignedInt(:65535) | R | Vendor ID (assigned by USB-IF). | - | 2.0 |
Manufacturer | string(:64) | R | Device Manufacturer string descriptor. | - | 2.0 |
ProductClass | string(:64) | R | Device Product Class string descriptor. | - | 2.0 |
SerialNumber | string(:64) | R | Device SerialNumber string descriptor. | - | 2.0 |
Port | unsignedInt(:255) | R | Hub port on parent device. 0 when no parent. | - | 2.0 |
USBPort | string | R | The value MUST be the Path Name of a row in the USB.Port. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. This is a reference to the USB host device to which this (external) USB device is connected. | - | 2.0 |
Rate | string | R | Speed of the USB device. Enumeration of:
|
- | 2.0 |
Parent | string | R | The value MUST be the Path Name of a row in the Device. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. This is a reference to the parent USB device (e.g. hub device). This is an empty string for a device connected to the Host controller (root hub). | - | 2.0 |
MaxChildren | unsignedInt | R | Number of ports. Only applies for hub device, equal to 0 for other devices. | - | 2.0 |
IsSuspended | boolean | R | When true the associated Device is in a suspended (i.e. low-power) state (see [Chapter 11.9/USB2.0]). When false the associated Device is in any of the other states specified by the USB 2.0 Device State Machine (see [Chapter 9.1.1/USB2.0]). | - | 2.0 |
IsSelfPowered | boolean | R | When true the associated device is at least partly powered by a local source (see [Chapter 9.4.5/USB2.0]). When false the associated device draws all the current it needs from the USB bus. | - | 2.0 |
ConfigurationNumberOfEntries | unsignedInt | R | The number of entries in the Configuration table. | - | 2.0 |
Device.USB.USBHosts.Host.{i}.Device.{i}.Configuration.{i}. | object(0:) | R | Table of device configurations. At most one entry in this table can exist with a given value for ConfigurationNumber. |
- | 2.0 |
ConfigurationNumber | unsignedInt | R | The identifier for each Device Configuration. | - | 2.0 |
InterfaceNumberOfEntries | unsignedInt | R | The number of entries in the Interface table. | - | 2.0 |
Device.USB.USBHosts.Host.{i}.Device.{i}.Configuration.{i}.Interface.{i}. | object(0:) | R | Table of device interface descriptors. At most one entry in this table can exist with a given value for InterfaceNumber. |
- | 2.0 |
InterfaceNumber | unsignedInt(:255) | R | Number of this interface (from USB interface descriptor). | - | 2.0 |
InterfaceClass | hexBinary(:1) | R | Class Code as assigned by USB-IF. When 0x00, each interface specifies its own class code. When 0xFF, the class code is vendor specified. | - | 2.0 |
InterfaceSubClass | hexBinary(:1) | R | Subclass code (assigned by USB-IF). | - | 2.0 |
InterfaceProtocol | hexBinary(:1) | R | Protocol code (assigned by USB-IF). | - | 2.0 |
Device.HPNA. | object | R | HPNA object that contains the Interface and Diagnostics objects. The HPNA (also known as HomePNA) industry standard [G.9954] defines peer to peer communication for home networking over existing coax cables and telephone wiring within the home. | - | 2.0 |
InterfaceNumberOfEntries | unsignedInt | R | The number of entries in the Interface table. | - | 2.0 |
Device.HPNA.Interface.{i}. | object(0:) | R | HPNA interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each table entry models the PHY and MAC levels of an HPNA interface [G.9954]. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.0 |
Enable | boolean | W | Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.0 |
Status | string | R | The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the interface as assigned by the CPE. | - | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the interface entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. | - | 2.0 |
Upstream | boolean | R | Indicates whether the interface points towards the Internet (true) or towards End Devices (false).
For example:
|
- | 2.0 |
MACAddress | string(:17) | R | [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. | - | 2.0 |
FirmwareVersion | string(:64) | R | This interface’s firmware version. | - | 2.0 |
NodeID | unsignedInt | R | The Node ID of this interface. | - | 2.0 |
IsMaster | boolean | R | Whether this interface is the HPNA network master. | - | 2.0 |
Synced | boolean | R | Whether this interface is synchronized with the HPNA network master. If this interface is the HPNA network master, Synced MUST be true. | - | 2.0 |
TotalSyncTime | unsignedInt | R | Total time in seconds (since device reset) that this interface has been up and synchronized to the HPNA network master. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MaxBitRate | unsignedInt | R | The maximum HPNA PHY bit rate (expressed in Mbps) of this interface. | - | 2.0 |
NetworkUtilization | unsignedInt(0:1000) | R | Current HPNA network utilization (expressed in 0.1%). | - | 2.0 |
PossibleConnectionTypes | string[] | R | Comma-separated list of strings. List items indicate the types of connections possible for this interface. Each list item is an enumeration of:
|
- | 2.0 |
ConnectionType | string[] | W | Each list item MUST be a member of the list reported by the PossibleConnectionTypes parameter. Comma-separated list of strings. Connection type(s) for which the HPNA protocol is active. | - | 2.0 |
PossibleSpectralModes | string[] | R | Comma-separated list of strings. List items indicate the spectral modes possible for this interface. Each list item is an enumeration of:
|
- | 2.0 |
SpectralMode | string | W | The value MUST be a member of the list reported by the PossibleSpectralModes parameter. Spectral mode for which the HPNA protocol is active. | - | 2.0 |
MTU | unsignedInt | W | Maximum Transmission Unit for this HPNA interface (expressed in bytes). | - | 2.0 |
NoiseMargin | unsignedInt | W | The desired noise margin for which the local HPNA interface has been configured (expressed in 0.1dB). | - | 2.0 |
DefaultNonLARQPER | unsignedInt | W | The desired packet error rate for which the local HPNA interface has been configured (expressed in 1E-8, e.g. PER of 1.27E-6 will be presented as 127). | - | 2.0 |
LARQEnable | boolean | W | Enable or disable the Limited Automatic Repeat Request (LARQ) mechanism. | - | 2.0 |
MinMulticastRate | unsignedInt | W | The minimum multicast (and broadcast) rate that can be negotiated on the HPNA network directly accessible via this interface (expressed in Mbps). | - | 2.0 |
NegMulticastRate | unsignedInt | R | The negotiated multicast (and broadcast) rate on the HPNA network directly accessible via this interface (expressed in Mbps). | - | 2.0 |
MasterSelectionMode | string | W | Master selection mode. Enumeration of:
|
- | 2.0 |
AssociatedDeviceNumberOfEntries | unsignedInt | R | The number of entries in the AssociatedDevice table. This is the number of HPNA nodes that are directly accessible via this interface. | - | 2.0 |
Device.HPNA.Interface.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsSent | unsignedLong | R | The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnknownProtoPacketsReceived | unsignedInt | R | The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.HPNA.Interface.{i}.QoS. | object | R | QoS configuration object. | - | 2.0 |
FlowSpecNumberOfEntries | unsignedInt | R | The number of entries in the FlowSpec table. | - | 2.0 |
Device.HPNA.Interface.{i}.QoS.FlowSpec.{i}. | object(0:) | W | Flow specification table. The QoS.Classification table is used to classify ingress traffic, where QoS.Classification.{i}.TrafficClass is one of the classification result outputs. This TrafficClass value can be used to look up the appropriate FlowSpec entry (i.e. the FlowSpec entry whose TrafficClasses list contains a matching traffic class). For enabled table entries, if TrafficClasses is an empty string then the table entry is inoperable and the CPE MUST set Status to Error_Misconfigured. At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- | 2.0 |
Enable | boolean | W | Enables or disables the table entry. | false | 2.0 |
Status | string | R | The status of this entry. Enumeration of:
|
Disabled | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
The Agent MUST choose an initial value that doesn’t conflict with any existing entries. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
TrafficClasses | unsignedInt[](:256) | W | Comma-separated list (maximum number of characters 256) of unsigned integers. This list identifies the set of traffic classes associated with this flow spec. | <Empty> | 2.0 |
FlowType | string | W | Flow type. Enumeration of:
|
BE | 2.0 |
Priority | unsignedInt(0:7) | W | Flow queue network priority. Priority 0 is the lowest priority. | 0 | 2.0 |
Latency | unsignedInt(0:999) | W | Maximum latency of the flow (expressed in milliseconds). Value 0 means no latency requirements. | 0 | 2.0 |
Jitter | unsignedInt(0:999) | W | Maximum jitter of the flow (expressed in milliseconds). Value 0 means no jitter requirements. | 0 | 2.0 |
PacketSize | unsignedInt(0:) | W | Typical packet size. Value 0 means undefined packet size. | 0 | 2.0 |
MinRate | unsignedInt | W | Minimum required rate in Kbps. Value 0 means no MinRate requirements. | 0 | 2.0 |
AvgRate | unsignedInt | W | Average required rate in Kbps. Value 0 means no AvgRate requirements. | 0 | 2.0 |
MaxRate | unsignedInt | W | Maximum required rate in Kbps. Value 0 means no MaxRate requirements. | 0 | 2.0 |
PER | unsignedInt | W | The desired packet error rate (expressed in 1E-8, e.g. PER of 1.27E-6 will be presented as 127). Value 0 means no PER requirements. | 0 | 2.0 |
Timeout | unsignedInt | W | Flow inactivity tear down timeout (expressed in milliseconds). Value 0 means unlimited timeout. | 0 | 2.0 |
Device.HPNA.Interface.{i}.AssociatedDevice.{i}. | object(0:) | R | This table provides information about other HPNA devices that are directly accessible via this HPNA interface. At most one entry in this table can exist with a given value for MACAddress. |
- | 2.0 |
MACAddress | string(:17) | R | [MACAddress] The physical address of this node. | - | 2.0 |
NodeID | unsignedInt | R | The Node ID of this node. | - | 2.0 |
IsMaster | boolean | R | Whether this node is the HPNA network master. | - | 2.0 |
Synced | boolean | R | Whether this node is synchronized with the HPNA network master. If this node is the HPNA network master, Synced MUST be true. | - | 2.0 |
TotalSyncTime | unsignedInt | R | Total time in seconds (since device reset) that this node has been up and synchronized to the HPNA network master. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MaxBitRate | unsignedInt | R | This node’s maximum HPNA PHY bit rate (expressed in Mbps). | - | 2.0 |
PHYDiagnosticsEnable | boolean | W | Enable / disable PHY throughput diagnostics mode on this node. All devices that are enabled will participate in the HPNA network PHY throughput diagnostics process. | - | 2.0 |
Active | boolean | R | Whether or not this node is currently present in the HPNA network. The ability to list inactive nodes is OPTIONAL. If the CPE includes inactive nodes in this table, Active MUST be set to false for each inactive node. The length of time an inactive node remains listed in this table is a local matter to the CPE. | - | 2.0 |
Device.HPNA.Diagnostics. | object | R | The HPNA Diagnostics object. | - | 2.0 |
Device.HPNA.Diagnostics.PHYThroughput. | object | R | HPNA PHY throughput diagnostics configuration and results. When diagnostics are requested, all HPNA nodes for which the Interface.{i}.AssociatedDevice.{i}.PHYDiagnosticsEnable parameter is set enter PHY diagnostics mode. | - | 2.0 |
DiagnosticsState | string | W | [DiagnosticsState] Indicates the availability of diagnostics data. Enumeration of: Enumeration of:
If the ACS sets the value of this parameter to Requested, the CPE MUST initiate the corresponding diagnostic test. When writing, the only allowed values are Requested and Canceled. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set, and any errors or inconsistencies in the test parameters MUST be detected, either prior to or at the same time as (in the same SetParameterValues) setting this parameter to Requested. When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic test. When the test is completed, the value of this parameter MUST be either Complete (if the test completed successfully), or one of the Error values listed above. If the value of this parameter is anything other than Complete, the values of the results parameters for this test are indeterminate. When the diagnostic initiated by the ACS is completed (successfully or not), but not if it is canceled for any reason, the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message. After the diagnostic is complete, the value of all result parameters (all read-only parameters in this object) MUST be retained by the CPE until either this diagnostic is run again, or the CPE reboots. After a reboot, if the CPE has not retained the result parameters from the most recent test, it MUST set the value of this parameter to None. Modifying any of the writable parameters in this object except for this one MUST result in the value of this parameter being set to None. While the test is in progress, modifying any of the writable parameters in this object except for this one MUST result in the test being terminated and the value of this parameter being set to None. While the test is in progress, setting this parameter to Requested (and possibly modifying other writable parameters in this object) MUST result in the test being terminated and then restarted using the current values of the test parameters. While the test is in progress, setting this parameter to Canceled MUST result in the test being canceled and the value of this parameter being set to None. If the CPE does not support the Canceled value, it MUST return a SPV error with “Invalid Parameter value” (9007) to the ACS instead. Enumeration of:
|
- | 2.0 |
Interface | string(:256) | W | The value MUST be the Path Name of a row in the HPNA.Interface. table. This is the interface over which the test is to be performed. | - | 2.0 |
NumPacketsInBurst | unsignedInt | W | Number of test packet in burst to be send during PHY diagnostics test from each HPNA device to other HPNA device in the HPNA network. | - | 2.0 |
BurstInterval | unsignedInt | W | Test packet burst interval length (expressed in milliseconds). | - | 2.0 |
TestPacketPayloadLength | unsignedInt(0:1480) | W | Payload length in the test packets. | - | 2.0 |
PayloadEncoding | unsignedInt | W | HPNA payload encoding in PHY diagnostics. 0 is used for negotiated payload between devices according to line conditions. | - | 2.0 |
PayloadDataGen | unsignedInt | W | Test packets payload data generator value. | - | 2.0 |
PayloadType | string | W | Test packets payload type. Enumeration of:
|
- | 2.0 |
PriorityLevel | unsignedInt(0:7) | W | Priority level of PHY diagnostics packets (0 lowest -7 highest). | - | 2.0 |
ResultNumberOfEntries | unsignedInt | R | The number of entries in the Result table. This is the number of PHY diagnostics results. | - | 2.0 |
Device.HPNA.Diagnostics.PHYThroughput.Result.{i}. | object(0:) | R | PHY throughput diagnostics results. Each result object corresponds to unidirectional traffic between two PHY diagnostics-enabled nodes (so there are two such objects for each such pair). At most one entry in this table can exist with the same values for both SrcMACAddress and DestMACAddress. |
- | 2.0 |
SrcMACAddress | string(:17) | R | [MACAddress] HPNA source MAC address. | - | 2.0 |
DestMACAddress | string(:17) | R | [MACAddress] HPNA destination MAC address. | - | 2.0 |
PHYRate | unsignedInt | R | PHY diagnostics HPNA PHY rate (expressed in Mbps). | - | 2.0 |
BaudRate | unsignedInt | R | PHY Baud rate (expressed in Kbaud). | - | 2.0 |
SNR | unsignedInt | R | PHY diagnostics SNR (expressed in 0.1dB). | - | 2.0 |
PacketsReceived | unsignedInt | R | Number of received packets in PHY diagnostics mode. | - | 2.0 |
Attenuation | unsignedInt | R | Measured attenuation (expressed in 0.1dB). | - | 2.0 |
Device.HPNA.Diagnostics.PerformanceMonitoring. | object | R | HPNA performance monitoring configuration and results. Performance monitoring results are sampled from all nodes in the HPNA network. All packet related counters are sampled synchronized at all nodes in the HPNA network in order to derive packet loss calculations in the HPNA network. | - | 2.0 |
DiagnosticsState | string | W | [DiagnosticsState] Indicates the availability of diagnostics data. Enumeration of: Enumeration of:
If the ACS sets the value of this parameter to Requested, the CPE MUST initiate the corresponding diagnostic test. When writing, the only allowed values are Requested and Canceled. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set, and any errors or inconsistencies in the test parameters MUST be detected, either prior to or at the same time as (in the same SetParameterValues) setting this parameter to Requested. When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic test. When the test is completed, the value of this parameter MUST be either Complete (if the test completed successfully), or one of the Error values listed above. If the value of this parameter is anything other than Complete, the values of the results parameters for this test are indeterminate. When the diagnostic initiated by the ACS is completed (successfully or not), but not if it is canceled for any reason, the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message. After the diagnostic is complete, the value of all result parameters (all read-only parameters in this object) MUST be retained by the CPE until either this diagnostic is run again, or the CPE reboots. After a reboot, if the CPE has not retained the result parameters from the most recent test, it MUST set the value of this parameter to None. Modifying any of the writable parameters in this object except for this one MUST result in the value of this parameter being set to None. While the test is in progress, modifying any of the writable parameters in this object except for this one MUST result in the test being terminated and the value of this parameter being set to None. While the test is in progress, setting this parameter to Requested (and possibly modifying other writable parameters in this object) MUST result in the test being terminated and then restarted using the current values of the test parameters. While the test is in progress, setting this parameter to Canceled MUST result in the test being canceled and the value of this parameter being set to None. If the CPE does not support the Canceled value, it MUST return a SPV error with “Invalid Parameter value” (9007) to the ACS instead. Enumeration of:
|
- | 2.0 |
Interface | string(:256) | W | The value MUST be the Path Name of a row in the HPNA.Interface. table. This is the interface over which the test is to be performed. | - | 2.0 |
SampleInterval | unsignedInt | W | Time in seconds between automatic collection of performance monitoring data. A value of zero disables automatic collection of data. The CPE MAY impose a minimum sample interval, in which case an attempt to set a (non-zero) interval that is less than this minimum MUST set the interval to the minimum and MUST NOT be regarded as an error. If SampleInterval is a simple fraction of a day, e.g. 900 (a quarter of an hour) or 3600 (an hour), the CPE MAY choose to align sample intervals with time of day, but is not required to do so. | - | 2.0 |
Device.HPNA.Diagnostics.PerformanceMonitoring.Nodes. | object | R | Per-node HPNA performance monitoring results. When automatic collection is enabled, i.e. SampleInterval is non-zero, the “current” interval is defined by the most recent automatic sample and the most recent subsequent manual sample, if any. When automatic collection is disabled, i.e. SampleInterval is zero, the “current” interval is defined by the three most recent manual samples. Note: Packets in statistics counters are Ethernet packets. | - | 2.0 |
CurrentStart | dateTime | R | Start time for the current interval. When automatic collection is enabled, i.e. SampleInterval is non-zero, the current interval started at the most recent automatic sample. When automatic collection is disabled, i.e. SampleInterval is zero, the current interval started two manual samples ago. | - | 2.0 |
CurrentEnd | dateTime | R | End time for the current interval. When automatic collection is enabled, i.e. SampleInterval is non-zero, the current interval ended at the most recent manual sample since the most recent automatic sample. If there has been no such manual sample, the current interval is empty. When automatic collection is disabled, i.e. SampleInterval is zero, the current interval ended at the most recent manual sample. | - | 2.0 |
NodeNumberOfEntries | unsignedInt | R | The number of entries in the Node table. This is the number of HPNA nodes for which performance monitoring results were collected during the current sample interval. | - | 2.0 |
Device.HPNA.Diagnostics.PerformanceMonitoring.Nodes.Node.{i}. | object(1:) | R | Per-node HPNA performance monitoring results during the current sample interval. Each table entry contains the results collected between an HPNA node (as indicated by MACAddress) and the local HPNA interface (as indicated by Interface). Note: Packet counters indicate the number of packets received between CurrentStart and CurrentEnd. This table MUST contain at least 1 entry. At most one entry in this table can exist with a given value for MACAddress. |
- | 2.0 |
MACAddress | string(:17) | R | [MACAddress] The MAC address of the HPNA node. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes sent by host equipment for transmission on the HPNA interface. | - | 2.0 |
BytesReceived | unsignedLong | R | The total number of received bytes on the HPNA interface destined for the host equipment. | - | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets sent by host equipment for transmission on the HPNA interface. Number includes also short error packets and control packets. | - | 2.0 |
PacketsReceived | unsignedLong | R | The total number of good packets received on the HPNA interface destined for the host equipment. | - | 2.0 |
BroadcastPacketsSent | unsignedLong | R | The number of broadcast packets transmitted on the HPNA interface. | - | 2.0 |
BroadcastPacketsReceived | unsignedLong | R | The number of broadcast packets received on the HPNA interface. | - | 2.0 |
MulticastPacketsSent | unsignedLong | R | The number of multicast packets transmitted on the HPNA interface. | - | 2.0 |
MulticastPacketsReceived | unsignedLong | R | The number of multicast packets received on the HPNA interface. | - | 2.0 |
PacketsCrcErrored | unsignedInt | R | The number of packets received on the HPNA interface with CRC errors. | - | 2.0 |
PacketsCrcErroredHost | unsignedInt | R | The number of CRC error packets received on the HPNA interface destined for the host equipment. | - | 2.0 |
PacketsShortErrored | unsignedInt | R | The number of packets received on the HPNA interface that are too short to be valid. | - | 2.0 |
PacketsShortErroredHost | unsignedInt | R | The number packets sent by the host equipment that are too short to be valid. | - | 2.0 |
RxPacketsDropped | unsignedInt | R | The number of received packets dropped due to lack of resources. | - | 2.0 |
TxPacketsDropped | unsignedInt | R | The number packets sent by the host equipment for transmission on the HPNA interface but dropped due to lack of resources. | - | 2.0 |
ControlRequestLocal | unsignedInt | R | The number of HPNA control request packets from local host. | - | 2.0 |
ControlReplyLocal | unsignedInt | R | The number of HPNA control reply packets to local host. | - | 2.0 |
ControlRequestRemote | unsignedInt | R | The number of HPNA control request packets from remote host. | - | 2.0 |
ControlReplyRemote | unsignedInt | R | The number of HPNA control reply packets to remote host. | - | 2.0 |
PacketsSentWire | unsignedLong | R | The total number of packets transmitted to wire. | - | 2.0 |
BroadcastPacketsSentWire | unsignedLong | R | The total number of broadcast packets transmitted to wire. | - | 2.0 |
MulticastPacketsSentWire | unsignedLong | R | The total number of multicast packets transmitted to wire. | - | 2.0 |
PacketsInternalControl | unsignedInt | R | The number of HPNA control request packets from internal node. | - | 2.0 |
BroadcastPacketsInternalControl | unsignedInt | R | The number of HPNA broadcast control request packets from internal node. | - | 2.0 |
PacketsReceivedQueued | unsignedInt | R | The number of received packets queued on host output queues. | - | 2.0 |
PacketsReceivedForwardUnknown | unsignedInt | R | The number of packets received and forwarded to unknown hosts. | - | 2.0 |
NodeUtilization | unsignedInt(0:1000) | R | The node utilization (expressed in 0.1%). | - | 2.0 |
Device.HPNA.Diagnostics.PerformanceMonitoring.Channels. | object | R | Per-channel HPNA performance monitoring results. Note: channels are unidirectional. | - | 2.0 |
TimeStamp | dateTime | R | Time at which channel data was last collected. | - | 2.0 |
ChannelNumberOfEntries | unsignedInt | R | The number of entries in the Channel table. This is the number of HPNA channels for which performance monitoring results have been collected. | - | 2.0 |
Device.HPNA.Diagnostics.PerformanceMonitoring.Channels.Channel.{i}. | object(0:) | R | Per-channel HPNA performance monitoring results. At most one entry in this table can exist with the same values for both HostSrcMACAddress and HostDestMACAddress. |
- | 2.0 |
HostSrcMACAddress | string(:17) | R | [MACAddress] The host source MAC address associated with the channel. | - | 2.0 |
HostDestMACAddress | string(:17) | R | [MACAddress] The host destination MAC address associated with the channel. | - | 2.0 |
HPNASrcMACAddress | string(:17) | R | [MACAddress] The HPNA source MAC address associated with the channel. | - | 2.0 |
HPNADestMACAddress | string(:17) | R | [MACAddress] The HPNA destination MAC address associated with the channel. | - | 2.0 |
PHYRate | unsignedInt | R | Channel PHY rate (expressed in Mbps). | - | 2.0 |
BaudRate | unsignedInt | R | PHY Baud rate (expressed in Kbaud). | - | 2.0 |
SNR | unsignedInt | R | Channel actual SNR measured in receiver side (expressed in 0.1dB). | - | 2.0 |
PacketsSent | unsignedInt | R | Number of packets sent in the channel. | - | 2.0 |
PacketsReceived | unsignedInt | R | Pre-LARQ number of packets received in the channel. | - | 2.0 |
LARQPacketsReceived | unsignedInt | R | Post-LARQ number of packets received in the channel. Valid only if LARQ is enabled. | - | 2.0 |
FlowSpec | string(:256) | R | The value MUST be the Path Name of a row in the HPNA.Interface.{i}.QoS.FlowSpec. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. Identifies the FlowSpec associated with the channel. This parameter is only used for channels that correspond to egress traffic from the local HPNA interface. An empty string means that the channel is not associated with any specified flow specification in the QoS object. | - | 2.0 |
Device.MoCA. | object | R | MoCA object that contains the Interface table [MoCAv1.0] [MoCAv1.1]. | - | 2.0 |
InterfaceNumberOfEntries | unsignedInt | R | The number of entries in the Interface table. | - | 2.0 |
Device.MoCA.Interface.{i}. | object(0:) | R | MoCA interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each table entry models the PHY and MAC levels of a MoCA interface [MoCAv1.0] [MoCAv1.1]. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.0 |
Enable | boolean | W | Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.0 |
Status | string | R | The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the interface as assigned by the CPE. | - | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the interface entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. | - | 2.0 |
Upstream | boolean | R | Indicates whether the interface points towards the Internet (true) or towards End Devices (false).
For example:
|
- | 2.0 |
MACAddress | string(:17) | R | [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. | - | 2.0 |
FirmwareVersion | string(:64) | R | This interface’s firmware version. This parameter is based on mocaIfSoftwareVersion from [MOCA11-MIB]. | - | 2.0 |
MaxBitRate | unsignedInt | R | The maximum MoCA PHY bit rate (expressed in Mbps). | - | 2.0 |
MaxIngressBW | unsignedInt | R | The maximum bandwidth of this interface for flows onto the MoCA network in Mbps. This parameter is based on mocaIfMaxIngressNodeBw from [MOCA11-MIB]. | - | 2.0 |
MaxEgressBW | unsignedInt | R | The maximum bandwidth of this interface for flows from the MoCA network in Mbps. This parameter is based on mocaIfMaxEgressNodeBw from [MOCA11-MIB]. | - | 2.0 |
HighestVersion | string(:64) | R | Identifies the highest MoCA version that this interface supports. This element MUST be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 1.0, where the components mean major.minor revision number. Possible patterns:
|
- | 2.0 |
CurrentVersion | string(:64) | R | Identifies the MoCA version that the MoCA network is currently running. This element MUST be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 1.0, where the components mean major.minor revision number. Possible patterns:
|
- | 2.0 |
NetworkCoordinator | unsignedInt | R | The Node ID of the current Network Coordinator (NC) for the MoCA network. This parameter is based on mocaIfNC from [MOCA11-MIB]. | - | 2.0 |
NodeID | unsignedInt | R | The Node ID of this interface. This parameter is based on mocaIfNodeID from [MOCA11-MIB]. | - | 2.0 |
MaxNodes | boolean | R | The maximum network node capability supported by the interface. If MaxNodes is true then the interface supports 16 nodes (the maximum for a MoCA 1.1 network). If MaxNodes is false then the interface supports 8 nodes (the maximum for a MoCA 1.0 network). | - | 2.0 |
PreferredNC | boolean | W | Whether this interface is a preferred Network Coordinator (NC). This parameter is based on mocaIfPreferredNC from [MOCA11-MIB]. | - | 2.0 |
BackupNC | unsignedInt | R | The Node ID of the backup Network Coordinator node. This parameter is based on mocaIfBackupNC from [MOCA11-MIB]. | - | 2.0 |
PrivacyEnabledSetting | boolean | W | The configured privacy mode. This indicates whether link-layer security is enabled (true) or disabled (false) for network admission. The configured privacy setting MAY NOT match the current operational state (PrivacyEnabled), since this setting is only applied during network formation or admission. | - | 2.0 |
PrivacyEnabled | boolean | R | Indicates whether link-layer security is enabled or disabled. This parameter is based on mocaIfPrivacyEnable from [MOCA11-MIB]. | - | 2.0 |
FreqCapabilityMask | hexBinary(8) | R | Hexadecimal encoded 64-bit mask of supported frequencies. This is the bit map of the spectrum that the interface supports, and each bit represents 25 MHz of spectrum. The least significant bit of the rightmost character corresponds to 800MHz, which is the lowest frequency. For example, an interface that supports 1150 MHz through 1500 MHz would have a value of 0x000000001FFFC000. This parameter is based on mocaIfCapabilityMask from [MOCA11-MIB]. | - | 2.0 |
FreqCurrentMaskSetting | hexBinary(8) | W | The configured hexadecimal encoded 64-bit mask of enabled frequencies for network admission. The configured frequencies MAY NOT match the current operational state (FreqCurrentMask), since this setting is only applied during network formation or admission. | - | 2.0 |
FreqCurrentMask | hexBinary(8) | R | Hexadecimal encoded 64-bit mask of used frequencies. This is the bit map of the spectrum that can be used and is a subset of the FreqCapabilityMask. Each bit represents 25 MHz of spectrum. The least significant bit of the rightmost character corresponds to 800MHz, which is the lowest frequency. This parameter is based on mocaIfChannelMask from [MOCA11-MIB]. | - | 2.0 |
CurrentOperFreq | unsignedInt | R | Current Operational Frequency. The RF frequency in Hz to which the MoCA interface is currently tuned. This parameter is only valid when Status is Up. This parameter is based on mocaIfRFChannel from [MOCA11-MIB]. | - | 2.0 |
LastOperFreq | unsignedInt | R | Last Operational Frequency. The RF frequency in Hz to which the MoCA interface was tuned when last in the Up state. This parameter is based on mocaIfLOF from [MOCA11-MIB]. | - | 2.0 |
KeyPassphrase | string(12:17) | W | MoCA Password. The value consists of numeric characters (0-9). Possible patterns:
When read, this parameter returns an empty string, regardless of the actual value. |
- | 2.0 |
TxPowerLimit | unsignedInt | W | Transmit Power attenuation in dB relative to the maximum transmit power. The MoCA interface SHOULD have Enable set to false for any change in this configuration. If the parameter is modified when Enable is true then this change might take several minutes to complete. This parameter is based on mocaIfTxPowerLimit from [MOCA11-MIB]. | - | 2.0 |
PowerCntlPhyTarget | unsignedInt | W | Target PHY rate in Mbps for the power control algorithm. The MoCA interface SHOULD have Enable set to false for any change in this configuration. If the parameter is modified when Enable is true then this change might take several minutes to complete. This parameter is based on mocaIfPowerControlTargetRate from [MOCA11-MIB]. | - | 2.0 |
BeaconPowerLimit | unsignedInt | W | Beacon Transmit Power attenuation in dB relative to the maximum transmit power. The MoCA interface SHOULD have Enable set to false for any change in this configuration. If the parameter is modified when Enable is true then this change might take several minutes to complete. This parameter is based on mocaIfBeaconPowerLimit from [MOCA11-MIB]. | - | 2.0 |
NetworkTabooMask | hexBinary(8) | R | Hexadecimal encoded 64-bit mask of MoCA taboo channels identified for the home network. This is the bit map of the spectrum that the interface supports, and each bit represents 25 MHz of spectrum. The least significant bit of the rightmost character corresponds to 800MHz, which is the lowest frequency. This parameter is based on mocaIfTabooChannelMask from [MOCA11-MIB]. | - | 2.0 |
NodeTabooMask | hexBinary(8) | R | Hexadecimal encoded 64-bit mask of supported frequencies. This is the bit map of the spectrum that the interface supports, and each bit represents 25 MHz of spectrum. The least significant bit of the rightmost character corresponds to 800MHz, which is the lowest frequency. This parameter is based on mocaIfNodeTabooChannelMask from [MOCA11-MIB]. | - | 2.0 |
TxBcastRate | unsignedInt | R | The broadcast PHY transmit rate in Mbps for this interface. This parameter is based on mocaIfTxGcdRate from [MOCA11-MIB]. | - | 2.0 |
TxBcastPowerReduction | unsignedInt | R | Transmit Power attenuation in dB relative to the maximum transmit power for broadcast transmissions. This parameter is based on mocaIfTxGcdPowerReduction from [MOCA11-MIB]. | - | 2.0 |
QAM256Capable | boolean | R | Whether this interface supports the 256 QAM feature. This parameter is based on mocaIfQAM256Capable from [MOCA11-MIB]. | - | 2.0 |
PacketAggregationCapability | unsignedInt(0:10) | R | The packet aggregation capability supported by the interface. Standard values are 0 (no support), 6 (6 packets) or 10 (10 packets). This parameter is based on mocaIfPacketsAggrCapability from [MOCA11-MIB]. | - | 2.0 |
AssociatedDeviceNumberOfEntries | unsignedInt | R | The number of entries in the AssociatedDevice table. | - | 2.0 |
Device.MoCA.Interface.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsSent | unsignedLong | R | The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnknownProtoPacketsReceived | unsignedInt | R | The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.MoCA.Interface.{i}.QoS. | object | R | The QoS object provides information on MoCA parameterized QoS for this interface [MoCAv1.1]. | - | 2.0 |
EgressNumFlows | unsignedInt | R | The number of QoS flows that this interface has from the MoCA network. This parameter is based on mocaIfEgressNodeNumFlows from [MOCA11-MIB]. | - | 2.0 |
IngressNumFlows | unsignedInt | R | The number of QoS flows that this interface has onto the MoCA network. This parameter is based on mocaIfIngressNodeNumFlows from [MOCA11-MIB]. | - | 2.0 |
FlowStatsNumberOfEntries | unsignedInt | R | The number of entries in the FlowStats table. | - | 2.0 |
Device.MoCA.Interface.{i}.QoS.FlowStats.{i}. | object(0:) | R | The flow statistics table provides information on the MoCA parameterized QoS flows this interface has allocated onto the MoCA network. At most one entry in this table can exist with a given value for FlowID. |
- | 2.0 |
FlowID | unsignedInt | R | The flow ID used to identify a flow in the network. This parameter is based on mocaIfFlowID from [MOCA11-MIB]. | - | 2.0 |
PacketDA | string(:17) | R | [MACAddress] The Destination Address (DA) for the packets in this flow. This parameter is based on mocaIfPacketDA from [MOCA11-MIB]. | - | 2.0 |
MaxRate | unsignedInt | R | Maximum required rate in Kbps. This parameter is based on mocaIfPeakDataRate from [MOCA11-MIB]. | - | 2.0 |
MaxBurstSize | unsignedInt | R | Maximum burst size. This parameter is based on mocaIfBurstSize from [MOCA11-MIB]. | - | 2.0 |
LeaseTime | unsignedInt | R | Flow lease time (expressed in seconds). A LeaseTime of 0 means unlimited lease time. This parameter is based on mocaIfLeaseTime from [MOCA11-MIB]. | - | 2.0 |
LeaseTimeLeft | unsignedInt | R | Flow lease time remaining (expressed in seconds). If LeaseTime is 0 then a LeaseTimeLeft of 0 means unlimited lease time; otherwise, a LeaseTimeLeft of 0 means expired. This parameter is based on mocaIfLeaseTimeLeft from [MOCA11-MIB]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
FlowPackets | unsignedInt | R | The number of packets transmitted for this flow. This parameter is based on mocaIfTxPacketsFlow from [MOCA11-MIB]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Device.MoCA.Interface.{i}.AssociatedDevice.{i}. | object(0:) | R | This table contains information about other MoCA devices currently associated with this MoCA interface. At most one entry in this table can exist with a given value for MACAddress. |
- | 2.0 |
MACAddress | string(:17) | R | [MACAddress] The MAC address of the associated device’s MoCA interface. | - | 2.0 |
NodeID | unsignedInt | R | The Node ID of this remote device. This parameter is based on mocaNodeIndex from [MOCA11-MIB]. | - | 2.0 |
PreferredNC | boolean | R | Whether this remote device is a preferred Network Coordinator (NC). This parameter is based on mocaNodePreferredNC from [MOCA11-MIB]. | - | 2.0 |
HighestVersion | string(:64) | R | Identifies the highest MoCA version that this remote device supports. This element MUST be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 1.0, where the components mean major.minor revision number. Possible patterns:
|
- | 2.0 |
PHYTxRate | unsignedInt | R | The PHY transmit rate (in Mbps) to this remote device. This parameter is based on mocaMeshTxRate from [MOCA11-MIB]. | - | 2.0 |
PHYRxRate | unsignedInt | R | The PHY receive rate (in Mbps) from this remote device. | - | 2.0 |
TxPowerControlReduction | unsignedInt | R | The reduction in transmitter level (in dB) due to power control. This parameter is based on mocaNodeTxPowerReduction from [MOCA11-MIB]. | - | 2.0 |
RxPowerLevel | unsignedInt | R | The power level (in dBm) received at the MoCA interface from this remote device. This parameter is based on mocaNodeRxPower from [MOCA11-MIB]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
TxBcastRate | unsignedInt | R | The broadcast PHY transmit rate (in Mbps) from this remote device. This parameter is based on mocaNodeTxGcdRate from [MOCA11-MIB]. | - | 2.0 |
RxBcastPowerLevel | unsignedInt | R | The power level (in dBm) received at the MoCA interface from this remote device. This parameter is based on mocaNodeRxGcdPower from [MOCA11-MIB]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
TxPackets | unsignedInt | R | The number of packets transmitted to this remote device (Note: Includes Broadcast, Multicast and Unicast packets). Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
RxPackets | unsignedInt | R | The number of packets received from this remote device (Note: Includes Broadcast, Multicast and Unicast packets). This parameter is based on mocaNodeRxPackets from [MOCA11-MIB]. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
RxErroredAndMissedPackets | unsignedInt | R | The number of errored and missed packets received from this remote device. This parameter is based on mocaNodeRxDrops from [MOCA11-MIB]. | - | 2.0 |
QAM256Capable | boolean | R | Whether this remote device supports the 256 QAM feature. This parameter is based on mocaNodeQAM256Capable from [MOCA11-MIB]. | - | 2.0 |
PacketAggregationCapability | unsignedInt(0:10) | R | The packet aggregation capability supported by the remote device. Standard values are 0 (no support), 6 (6 packets) or 10 (10 packets). This parameter is based on mocaNodePacketsAggrCapability from [MOCA11-MIB]. | - | 2.0 |
RxSNR | unsignedInt | R | The signal to noise level (in dBm) received at this interface from this remote device. This parameter is based on mocaNodeSNR from [MOCA11-MIB]. | - | 2.0 |
Active | boolean | R | Whether or not this remote device is currently present in the MoCA network. The ability to list inactive nodes is OPTIONAL. If the CPE includes inactive nodes in this table, Active MUST be set to false for each inactive node. The length of time an inactive node remains listed in this table is a local matter to the CPE. | - | 2.0 |
Device.Ghn. | object | R | G.hn object that contains an Interface table for G.hn supported CPE. The ITU-T G.hn specifications [G.9960] and [G.9961] define Physical and MAC Layers for communication between two or more G.hn nodes in the home network over multiple wired media such as power line, phone line and coaxial cable. | - | 2.4 |
InterfaceNumberOfEntries | unsignedInt | R | The number of entries in the Interface table. | - | 2.4 |
Device.Ghn.Interface.{i}. | object(0:) | R | G.hn interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each table entry models the PHY [G.9960] and MAC [G.9961] layers of a G.hn interface. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.4 |
Enable | boolean | W | Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.4 |
Status | string | R | The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.4 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
|
- | 2.4 |
Name | string(:64) | R | The textual name of the interface as assigned by the CPE. | - | 2.4 |
LastChange | unsignedInt | R | The accumulated time in seconds since the interface entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. | - | 2.4 |
Upstream | boolean | R | Indicates whether the interface points towards the Internet (true) or towards End Devices (false).
For example:
|
- | 2.4 |
MACAddress | string(:17) | R | [MACAddress] The MAC Address of the interface, denoted as node MAC address or REGID in [G.9961]. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. | - | 2.4 |
FirmwareVersion | string(:64) | R | The firmware version of the interface. | - | 2.4 |
ConnectionType | string | R | This parameter was DEPRECATED because it has been replaced by MediumType. This parameter is OBSOLETED in 2.14. Enumeration of:
|
- | 2.4 |
MaxTransmitRate | unsignedInt | R | The maximum PHY data rate that the interface is capable of transmitting (expressed in Mbps). | - | 2.8 |
TargetDomainNames | string(:32)[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings (maximum number of characters per item 32). Identifies the target domains configured by the user, as described in [Section 8.6.1/G.9961]. When registering or re-registering, the G.hn interface SHOULD try to register to one of these domains in the given order. | - | 2.4 |
DomainName | string(:32) | R | This is the domain name to which the interface is currently registered. An empty string indicates that the interface is currently not registered. | - | 2.4 |
DomainNameIdentifier | unsignedInt | R | The Domain Name Identifier, a shortened version of DomainName, denoted as DNI in [Section 8.6.11.2.1/G.9961]. | - | 2.4 |
DomainId | unsignedInt | R | The Domain Identifier of the domain to which the interface is registered, denoted as DOD in [G.9961]. | - | 2.4 |
DeviceId | unsignedInt | R | The Device Identifier assigned by the Domain Master, denoted as DEVICE_ID in [G.9961]. The value 0 indicates that the device is not currently registered. | - | 2.4 |
MaxBitRate | unsignedInt | R | The maximum PHY bit rate supported by this interface (expressed in Mbps). | - | 2.4 |
NodeTypeDMCapable | boolean | R | Indicates whether this interface has the capability to act as Domain Master in the G.hn domain. | - | 2.4 |
DMRequested | boolean | W | Indicates a request to force the role of the G.hn interface to Domain Master (DM) for the G.hn domain it is connected to. The selection of the Domain Master follows the procedures described in [Clause 8.6.6/G.9961]. | - | 2.8 |
IsDM | boolean | R | Indicates whether this G.hn interface is currently the Domain Master (DM) for the G.hn domain it is connected to, as described in [Clause 8.6/G.9961]. | - | 2.8 |
NodeTypeSCCapable | boolean | R | Indicates whether this interface has the capability to act as Security Controller in the G.hn domain. | - | 2.4 |
SCRequested | boolean | W | Indicates a request to force the role of the G.hn interface to Security Controller (SC) for the G.hn domain it is connected to. The selection of the Security Controller follows the procedures described in [Clause 9.2/G.9961]. | - | 2.8 |
IsSC | boolean | R | Indicates whether this G.hn interface is currently the Security Controller (SC) for the G.hn domain it is connected to, as described in [Clause 9.2/G.9961]. | - | 2.8 |
StandardVersions | string[] | R | Comma-separated list of strings. The standard versions that the interface supports. The list MUST have an even number of items. The first item of each pair represents an ITU-T G.hn Recommendation while the second element of each pair represents the amendment version of the indicated Recommendation that this interface supports (the value 0 corresponds to the base Recommendation). For example, to indicate support for the G.9960 base document and G.9961 amendment 1, the corresponding list would be “G9960,0,G9961,1”. | - | 2.8 |
MaxBandPlan | unsignedInt | R | The largest bandplan that the interface can support, as defined in [Clause 8.8.5.5/G.9961]. | - | 2.8 |
MediumType | string | R | The medium type that the interface currently operates on. Refer to [Table 7-5/G.9962]. Enumeration of:
|
- | 2.8 |
TAIFG | unsignedInt | R | The Acknowledgement InterFrame Gap, or TAIFG, as defined in [Clause 8.4/G.9961]. It is represented as multiples of 1.28 microseconds. | - | 2.8 |
NotchedAmateurRadioBands | hexBinary(:2) | W | A bit map representing usage of international amateur bands (0 = masked, 1 = unmasked). The LSB represents the lowest band (1.8-2.0 MHz), the second LSB represents the second lowest band (3.5-4.0 MHz), and so on. The maximum value for this parameter is 0x03FF, i.e. it is a 10-bit quantity represented in 16 bits and the top 6 bits are always zero. International Radio amateur bands are described in [Table D-1/G.9964] and conveyed by the Domain Master in the Amateur radio band descriptor (see [Table 8-77/G.9961]). | - | 2.8 |
PHYThroughputDiagnosticsEnable | string | W | Comma-separated list of DeviceIDs of nodes that need to enable their PHY throughput diagnostics mode. All devices that are enabled will participate in the G.hn network PHY throughput diagnostics process. | - | 2.8 |
PerformanceMonitoringDiagnosticsEnable | string | W | Comma-separated list of DeviceIDs of nodes that need to enable their Performance Monitoring diagnostics mode on this node. All devices that are enabled will participate in the G.hn network Performance Monitoring diagnostics process. | - | 2.8 |
SMMaskedBandNumberOfEntries | unsignedInt | R | The number of entries in the SMMaskedBand table. | - | 2.8 |
NodeTypeDMConfig | boolean | W | Requests the interface to become the Domain Master in the G.hn domain. This parameter is valid only if NodeTypeDMCapable is true. Note that, if more than one node is configured to act as Domain Master, G.hn specifies a protocol to ensure only one device actually becomes DM. | - | 2.4 |
NodeTypeDMStatus | boolean | R | Indicates whether the interface is acting as Domain Master (true) or not (false). See Note in NodeTypeDMConfig regarding the possibility of more than one node being configured with NodeTypeDMConfig = true. | - | 2.4 |
NodeTypeSCStatus | boolean | R | Indicates whether the interface is acting as Security Controller (true) or not (false). | - | 2.4 |
AssociatedDeviceNumberOfEntries | unsignedInt | R | The number of entries in the AssociatedDevice table. | - | 2.4 |
PSM | unsignedInt[2:2][2:32] | W | Specifies the list of PSD shaping mask (PSM) breakpoints to be applied to the G.hn interface.
Comma-separated list (2 to 32 items) of PSMBreak Point Index And Levels, with each list item consisting of the following.
[PSMBreakPointIndexAndLevel] 1. The PSM breakpoint sub-carrier index in the range [0:4095], and
|
- | 2.12 |
Device.Ghn.Interface.{i}.Stats. | object | R | Throughput statistics for this interface at the different G.hn reference points described in [Clause 8.1/G.9961]. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.4 |
BytesSent | unsignedLong | R | [StatsCounter64] The total number of bytes transmitted out of the interface, including framing characters. More specifically, this is the total number of MPDU bytes transmitted or retransmitted by the node through a physical medium (i.e., PMI defined in [Clause 5.2.1/G.9960]), which correspond to data LPDUs (i.e., data packets) and framing overhead (e.g., LFH, LPH, LPCS defined in [Clause 8.1/G.9961]). It does not include transmitted bytes contributed by management LPDUs (i.e., management packets). Note: LPDUs in mixed LLC frame blocks are considered data LPDUs. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
BytesReceived | unsignedLong | R | [StatsCounter64] The total number of bytes received on the interface, including framing characters. More specifically, this is the total number of MPDU bytes received by the node through a physical medium, which correspond to data LPDUs and framing overhead. It does not include received bytes contributed by management LPDUs. It can include blocks with errors. Note: LPDUs in mixed LLC frame blocks are considered data LPDUs. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
PacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets transmitted out of the interface. More specifically, this is the total number of APDUs requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]) that were transmitted by the node through the physical medium. It does not include transmitted LCDUs. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
PacketsReceived | unsignedLong | R | [StatsCounter64] The total number of packets received on the interface. More specifically, this is the total number of APDUs delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) that were received by the node through the physical medium. It does not include received LCDUs. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
ErrorsSent | unsignedInt | R | [StatsCounter32] The total number of outbound packets that could not be transmitted because of errors. More specifically, this is the total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]) but could not be transmitted because of errors (e.g., APDUs containing CRC errors). Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
ErrorsReceived | unsignedInt | R | [StatsCounter32] The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. More specifically, this is the total number of received APDUs that contained errors preventing them from being delivered to a higher layer (i.e., inbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]). The possible causes of error are: incorrect CRC, incorrect MIC, incorrect MIC size, and incorrect size of packet. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
UnicastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. More specifically, this is the total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a unicast address at this layer. It includes APDUs that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
UnicastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. More specifically, this is the total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a unicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
DiscardPacketsSent | unsignedInt | R | [StatsCounter32] The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. More specifically, this is the total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) but chosen to be discarded even though no errors had been detected to prevent their being transmitted (e.g., buffer overflow). Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
DiscardPacketsReceived | unsignedInt | R | [StatsCounter32] The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. More specifically, this is the total number of received APDUs that were chosen to be discarded even though no errors had been detected to prevent their being delivered. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
MulticastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. More specifically, this is the total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a multicast address at this layer. It includes APDUs that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
MulticastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. More specifically, this is the total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
BroadcastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. More specifically, this is the total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a broadcast address at this layer. It includes APDUs that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
BroadcastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. More specifically, this is the total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
UnknownProtoPacketsReceived | unsignedInt | R | [StatsCounter32] The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. More specifically, this is the total number of APDUs received by the management that were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
MgmtBytesSent | unsignedLong | R | [StatsCounter64] The total number of MPDU bytes transmitted by the node through a physical medium, which correspond to management LPDUs and framing overhead. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
MgmtBytesReceived | unsignedLong | R | [StatsCounter64] The total number of MPDU bytes received by the node through a physical medium, which correspond to management LPDUs and framing overhead. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
MgmtPacketsSent | unsignedLong | R | [StatsCounter64] The total number of LCDUs requested for transmission by a management layer (i.e., outbound LCDUs generated in LLC defined in [Clause 8.1.3/G.9961]) that were transmitted by the node through a physical medium. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
MgmtPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of LCDUs delivered to a management layer (i.e., inbound LCDUs) that were received by the node through a physical medium. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BlocksSent | unsignedLong | R | [StatsCounter64] The total number of LPDUs that were transmitted by the node through a physical medium, regardless of new or retransmitted LPDUs. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BlocksReceived | unsignedLong | R | [StatsCounter64] The total number of LPDUs that were received by the node through a physical medium, with or without errors. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BlocksResent | unsignedInt | R | [StatsCounter32] The total number of LPDUs that were retransmitted. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BlocksErrorsReceived | unsignedInt | R | [StatsCounter32] The total number of received LPDUs that contained errors. Note the following relationships hold:
Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
Device.Ghn.Interface.{i}.AssociatedDevice.{i}. | object(0:) | R | This table contains information about other G.hn devices connected to this G.hn interface. At most one entry in this table can exist with a given value for MACAddress. |
- | 2.4 |
MACAddress | string(:17) | R | [MACAddress] MAC address of remote G.hn device. This is denoted as REGID in [G.9961]. | - | 2.4 |
DeviceId | unsignedInt | R | Device Id (as defined in G.hn) for the remote G.hn device, denoted as DEVICE_ID in [G.9961]. | - | 2.4 |
TxPhyRate | unsignedInt | R | The PHY transmit Rate (expressed in Mbps) to this remote device, denoted as PHY data rate in [G.9961]. Refer to Note 1 of [Table 8-48/G.9961]. To convert from the value in the table, divide by 32K (32768) and round down. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
RxPhyRate | unsignedInt | R | The PHY receive Rate (expressed in Mbps) from this remote device, denoted as PHY data rate in [G.9961]. Refer to Note 1 of [Table 8-48/G.9961]. To convert from the value in the table, divide by 32K (32768) and round down. Active Notification requests for this parameter MAY be denied. |
- | 2.4 |
Active | boolean | R | Whether or not this device is currently present in the G.hn domain. The ability to list inactive nodes is OPTIONAL. If the CPE includes inactive nodes in this table, Active MUST be set to false for each inactive node. The length of time an inactive node remains listed in this table is a local matter to the CPE. If Active is true, it indicates that the Status of the remote device is 0, 1, or 2 (see [Table 7-3/G.9961]). | - | 2.4 |
Device.Ghn.Interface.{i}.DMInfo. | object | R | This object specifies management parameters pertaining to the domain functionality (Domain Master function; see [Clause 8.6/G.9961]). The object exists only on G.hn interfaces that are currently the Domain Master, i.e. for which parameter IsDM is true. | - | 2.8 |
DomainName | hexBinary(:32) | W | This is the domain name to which the interface is currently registered. An empty string indicates that the interface is currently not registered. | - | 2.8 |
DomainNameIdentifier | hexBinary(:2) | R | The Domain Name Identifier, a shortened version of DomainName, denoted as DNI in [Section 8.6.11.2.1/G.9961]. | - | 2.8 |
DomainId | unsignedInt | R | The Domain Identifier of the domain to which the interface is registered, denoted as DOD in [G.9961]. | - | 2.8 |
MACCycleDuration | unsignedInt(0,10:200) | W | The MAC cycle duration, as specified in [Clause 8.4/G.9961]. It is represented as multiples of 0.5 msec. In the case of power line, writing to this parameter has no effect and it reads back as 0, which is a special value indicating that the MAC cycle is synchronized with 2 AC cycles as defined in [Clause 8.6.3.1/G.9961]. | - | 2.8 |
SCDeviceId | unsignedInt | W | The DEVICE_ID of the Security Controller selected by the Domain Master. | - | 2.8 |
SCMACAddress | string(:17) | W | [MACAddress] The REGID of the Security Controller selected by the Domain Master. | - | 2.8 |
ReregistrationTimePeriod | unsignedInt(5:63) | W | The time interval for periodic re-registration, as specified in [Clause 8.8.5.8/G.9961]. It is represented as multiples of 2 seconds. | - | 2.8 |
TopologyPeriodicInterval | unsignedInt(0:255) | W | The time interval that a node sends out the periodic topology update using TM_NodeTopologyChange.ind message, as specified in [Clause 8.8.5.8.1/G.9961]. It is represented as multiples of 0.1 sec. The special value 0 represents an infinite interval (i.e., no periodic topology update). | - | 2.8 |
MinSupportedBandplan | unsignedInt | W | Indicates the value of the minimal bandplan capability for a node that is allowed to register to the domain. | - | 2.8 |
MaxSupportedBandplan | unsignedInt | W | Indicates the value of the minimal bandplan capability for a node that is allowed to register to the domain. | - | 2.8 |
Device.Ghn.Interface.{i}.SCInfo. | object | R | This object specifies management parameters pertaining to the Security Controller functionality (Security Controller function; see [Clause 9.2/G.9961]). The object exists only on G.hn interfaces that are currently the Security Controller, i.e. for which parameter IsSC is true. | - | 2.8 |
ModesSupported | string[] | R | Comma-separated list of strings. The security modes that the Security Controller can support. Refer to [Clause 9.2/G.9961]. Each list item is an enumeration of:
|
- | 2.8 |
ModeEnabled | string | W | The value MUST be a member of the list reported by the ModesSupported parameter, or else be Disabled. The security mode in which the Security Controller is operating. | - | 2.8 |
MICSize | string | W | The selected MIC size used in the domain. Enumeration of:
|
- | 2.8 |
Location | boolean | R | Indicates whether the Security Controller is above the L1 reference point. It is set to true if the Security Controller is above the L1 reference point, and set to false otherwise. | - | 2.8 |
Device.Ghn.Interface.{i}.SMMaskedBand.{i}. | object(0:32) | W | Specifies the list of masked bands to be applied to the G.hn interface. This information is conveyed by the Domain Master in the SM descriptor as specified in [Table 8-77/G.9961]. Instances of this object are expected to exist only on G.hn interfaces that are currently the Domain Master, i.e. for which parameter IsDM is true. This table MUST contain at least 0 and at most 32 entries. At most one enabled entry in this table can exist with a given value for BandNumber. |
- | 2.8 |
Enable | boolean | W | Enables or disables the SMMaskedBand. | - | 2.8 |
BandNumber | unsignedInt | W | The masked band number. | - | 2.8 |
StartSubCarrier | unsignedInt | W | Index of the lowest frequency sub-carrier in the band to be masked as specified in [Table 8-79/G.9961]. This parameter is writable only on the interface which acts as the Domain Master. | - | 2.8 |
StopSubCarrier | unsignedInt | W | Index of the highest frequency sub-carrier in the band to be masked as specified in Table 8-79 in [G.9961]. This parameter is writable only on the interface which acts as the Domain Master. | - | 2.8 |
Device.Ghn.Diagnostics. | object | R | The G.hn Diagnostics object. | - | 2.8 |
Device.Ghn.Diagnostics.PHYThroughput. | object | R | G.hn PHY throughput diagnostics configuration and results. When diagnostics are requested, all G.hn nodes for which the Interface.{i}.PHYThroughputDiagnosticsEnable parameter is set enter PHY diagnostics mode. | - | 2.8 |
DiagnosticsState | string | W | [DiagnosticsState] Indicates the availability of diagnostics data. Enumeration of: Enumeration of:
If the ACS sets the value of this parameter to Requested, the CPE MUST initiate the corresponding diagnostic test. When writing, the only allowed values are Requested and Canceled. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set, and any errors or inconsistencies in the test parameters MUST be detected, either prior to or at the same time as (in the same SetParameterValues) setting this parameter to Requested. When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic test. When the test is completed, the value of this parameter MUST be either Complete (if the test completed successfully), or one of the Error values listed above. If the value of this parameter is anything other than Complete, the values of the results parameters for this test are indeterminate. When the diagnostic initiated by the ACS is completed (successfully or not), but not if it is canceled for any reason, the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message. After the diagnostic is complete, the value of all result parameters (all read-only parameters in this object) MUST be retained by the CPE until either this diagnostic is run again, or the CPE reboots. After a reboot, if the CPE has not retained the result parameters from the most recent test, it MUST set the value of this parameter to None. Modifying any of the writable parameters in this object except for this one MUST result in the value of this parameter being set to None. While the test is in progress, modifying any of the writable parameters in this object except for this one MUST result in the test being terminated and the value of this parameter being set to None. While the test is in progress, setting this parameter to Requested (and possibly modifying other writable parameters in this object) MUST result in the test being terminated and then restarted using the current values of the test parameters. While the test is in progress, setting this parameter to Canceled MUST result in the test being canceled and the value of this parameter being set to None. If the CPE does not support the Canceled value, it MUST return a SPV error with “Invalid Parameter value” (9007) to the ACS instead. Enumeration of:
|
- | 2.8 |
Device.Ghn.Diagnostics.PerformanceMonitoring. | object | R | G.hn Performance Monitoring diagnostics configuration and results. When diagnostics are requested, all G.hn nodes for which the Interface.{i}.PerformanceMonitoringDiagnosticsEnable parameter is set enter PHY diagnostics mode. | - | 2.8 |
DiagnosticsState | string | W | [DiagnosticsState] Indicates the availability of diagnostics data. Enumeration of: Enumeration of:
If the ACS sets the value of this parameter to Requested, the CPE MUST initiate the corresponding diagnostic test. When writing, the only allowed values are Requested and Canceled. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set, and any errors or inconsistencies in the test parameters MUST be detected, either prior to or at the same time as (in the same SetParameterValues) setting this parameter to Requested. When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic test. When the test is completed, the value of this parameter MUST be either Complete (if the test completed successfully), or one of the Error values listed above. If the value of this parameter is anything other than Complete, the values of the results parameters for this test are indeterminate. When the diagnostic initiated by the ACS is completed (successfully or not), but not if it is canceled for any reason, the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message. After the diagnostic is complete, the value of all result parameters (all read-only parameters in this object) MUST be retained by the CPE until either this diagnostic is run again, or the CPE reboots. After a reboot, if the CPE has not retained the result parameters from the most recent test, it MUST set the value of this parameter to None. Modifying any of the writable parameters in this object except for this one MUST result in the value of this parameter being set to None. While the test is in progress, modifying any of the writable parameters in this object except for this one MUST result in the test being terminated and the value of this parameter being set to None. While the test is in progress, setting this parameter to Requested (and possibly modifying other writable parameters in this object) MUST result in the test being terminated and then restarted using the current values of the test parameters. While the test is in progress, setting this parameter to Canceled MUST result in the test being canceled and the value of this parameter being set to None. If the CPE does not support the Canceled value, it MUST return a SPV error with “Invalid Parameter value” (9007) to the ACS instead. Enumeration of:
|
- | 2.8 |
Interface | string | W | The value MUST be the Path Name of a row in the Ghn.Interface. table. The interface over which the test is to be performed. | - | 2.8 |
DiagnoseMACAddress | string(:17) | W | [MACAddress] The MAC address of the originating G.hn interface of the link that is being diagnosed. Note: This MAC address might belong to another node of the domain. | - | 2.8 |
SampleInterval | unsignedInt | W | Time in seconds between automatic collection of performance monitoring data. A value of zero disables automatic collection of data. The node MAY impose a minimum sample interval, in which case an attempt to set a (non-zero) interval that is less than this minimum MUST set the interval to the minimum and MUST NOT be regarded as an error. If SampleInterval is a simple fraction of a day, e.g. 900 (a quarter of an hour) or 3600 (an hour), the device MAY choose to align sample intervals with time of day, but is not required to do so. | - | 2.8 |
SNRGroupLength | unsignedInt(1,2,4,8,16,32,64,128,256) | W | The number of sub-carriers in a group to be used for averaging SNR values when providing SNR information for a channel. | - | 2.8 |
Device.Ghn.Diagnostics.PerformanceMonitoring.Nodes. | object | R | Per-node G.hn performance monitoring results. When automatic collection is enabled, i.e. SampleInterval is non-zero, the “current” interval is defined by the most recent automatic sample and the most recent subsequent manual sample, if any. When automatic collection is disabled, i.e. SampleInterval is zero, the “current” interval is defined by the three most recent manual samples. Note: Packets in statistics counters are Ethernet packets. | - | 2.8 |
CurrentStart | dateTime | R | Start time for the current interval. When automatic collection is enabled, i.e. SampleInterval is non-zero, the current interval started at the most recent automatic sample. When automatic collection is disabled, i.e. SampleInterval is zero, the current interval started two manual samples ago. | - | 2.8 |
CurrentEnd | dateTime | R | End time for the current interval. When automatic collection is enabled, i.e. SampleInterval is non-zero, the current interval ended at the most recent manual sample since the most recent automatic sample. If there has been no such manual sample, the current interval is empty. When automatic collection is disabled, i.e. SampleInterval is zero, the current interval ended at the most recent manual sample. | - | 2.8 |
NodeNumberOfEntries | unsignedInt | R | The number of entries in the Node table. This is the number of G.hn nodes for which performance monitoring results were collected during the current sample interval. | - | 2.8 |
Device.Ghn.Diagnostics.PerformanceMonitoring.Nodes.Node.{i}. | object(1:) | R | Per-node G.hn performance monitoring results during the current sample interval. Each table entry contains the results collected between the G.hn nodes with MAC addresses DiagnoseMACAddress) and DestinationMACAddress). Note: Packet counters indicate the number of packets received between CurrentStart and CurrentEnd. This table MUST contain at least 1 entry. At most one entry in this table can exist with a given value for DestinationMACAddress. |
- | 2.8 |
DestinationMACAddress | string(:17) | R | [MACAddress] MAC address of the destination node of the link being measured. | - | 2.8 |
BytesSent | unsignedLong | R | [StatsCounter64] The total number of MPDU bytes transmitted or retransmitted by the node through a physical medium (i.e., PMI defined in [Clause 5.2.1/G.9960]), which correspond to data LPDUs (i.e., data packets) and framing overhead (e.g., LFH, LPH, LPCS defined in [Clause 8.1/G.9961]). It does not include transmitted bytes contributed by management LPDUs (i.e., management packets). Note: LPDUs in mixed LLC frame blocks are considered data LPDUs. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BytesReceived | unsignedLong | R | [StatsCounter64] The total number of MPDU bytes received by the node through a physical medium, which correspond to data LPDUs and framing overhead. It does not include received bytes contributed by management LPDUs. It might include blocks with errors. Note: LPDUs in mixed LLC frame blocks are considered data LPDUs. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
PacketsSent | unsignedLong | R | [StatsCounter64] The total number of APDUs requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]) that were transmitted by the node through the physical medium. It does not include transmitted LCDUs. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
PacketsReceived | unsignedLong | R | [StatsCounter64] The total number of APDUs delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) that were received by the node through the physical medium. It does not include received LCDUs. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
ErrorsSent | unsignedInt | R | [StatsCounter32] The total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]). This parameter represents the total number of LCDUs requested for transmission by a management layer (i.e., outbound LCDUs generated in LLC defined in in [Clause 8.1.3/G.9961]) that were transmitted by the node through a physical medium) but could not be transmitted because of errors (e.g., APDUs containing CRC errors). Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
ErrorsReceived | unsignedInt | R | [StatsCounter32] The total number of received APDUs that contained errors preventing them from being delivered to a higher layer (i.e., inbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]). The possible causes of error are: incorrect CRC, incorrect MIC, incorrect MIC size, and incorrect size of packet. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
UnicastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a unicast address at this layer. It includes APDUs that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
UnicastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a unicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
DiscardPacketsSent | unsignedInt | R | [StatsCounter32] The total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) but chosen to be discarded even though no errors had been detected to prevent their being transmitted (e.g., buffer overflow). Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
DiscardPacketsReceived | unsignedInt | R | [StatsCounter32] The total number of received APDUs that were chosen to be discarded even though no errors had been detected to prevent their being delivered. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
MulticastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a multicast address at this layer. It includes APDUs that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
MulticastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BroadcastPacketsSent | unsignedLong | R | [StatsCounter64] The total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a broadcast address at this layer. It includes APDUs that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BroadcastPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
UnknownProtoPacketsReceived | unsignedInt | R | [StatsCounter32] The total number of APDUs received by the management that were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
MgmtBytesSent | unsignedLong | R | [StatsCounter64] The total number of MPDU bytes transmitted by the node through a physical medium, which correspond to management LPDUs and framing overhead. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
MgmtBytesReceived | unsignedLong | R | [StatsCounter64] The total number of MPDU bytes received by the node through a physical medium, which correspond to management LPDUs and framing overhead. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
MgmtPacketsSent | unsignedLong | R | [StatsCounter64] The total number of LCDUs requested for transmission by a management layer (i.e., outbound LCDUs generated in LLC defined in [Clause 8.1.3/G.9961]) that were transmitted by the node through a physical medium. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
MgmtPacketsReceived | unsignedLong | R | [StatsCounter64] The total number of LCDUs delivered to a management layer (i.e., inbound LCDUs) that were received by the node through a physical medium. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BlocksSent | unsignedLong | R | [StatsCounter64] The total number of LPDUs that were transmitted by the node through a physical medium, regardless of new or retransmitted LPDUs. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BlocksReceived | unsignedLong | R | [StatsCounter64] The total number of LPDUs that were received by the node through a physical medium, with or without errors. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BlocksResent | unsignedInt | R | [StatsCounter32] The total number of LPDUs that were retransmitted. Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
BlocksErrorsReceived | unsignedInt | R | [StatsCounter32] The total number of received LPDUs that contained errors. Note the following relationships hold:
Active Notification requests for this parameter MAY be denied. |
- | 2.8 |
Device.Ghn.Diagnostics.PerformanceMonitoring.Channels. | object | R | Per-channel G.hn performance monitoring results. Note: channels are unidirectional. | - | 2.8 |
TimeStamp | dateTime | R | Time at which channel data was last collected. | - | 2.8 |
ChannelNumberOfEntries | unsignedInt | R | The number of entries in the Channel table. | - | 2.8 |
Device.Ghn.Diagnostics.PerformanceMonitoring.Channels.Channel.{i}. | object(0:) | R | Per-channel G.hn performance monitoring results during the current sample interval. Each table entry contains the results collected from the channel between a G.hn interface (as indicated by DiagnoseMACAddress) and a G.hn interface indicated by DestinationMACAddress) At most one entry in this table can exist with a given value for DestinationMACAddress. |
- | 2.8 |
DestinationMACAddress | string(:17) | R | [MACAddress] MAC address of the destination node of the link being measured. | - | 2.8 |
SNR | unsignedInt[] | R | Comma-separated list of unsigned integers. The result of an SNR test performed over the channel. It is formatted as a comma-separated list of N/M unsigned integers that represents the result of Signal-to-Noise-Ratio measurement averaging in groups of M subcarriers. The number N depends on the bandplan used by the node and corresponds to the OFDM control parameter N of each medium as defined in [G.9964]. The number M corresponds to the parameter SNRGroupLength. | - | 2.8 |
Device.HomePlug. | object | R | HomePlug object that contains the Interface table. The HomePlug industry standard [HPAV1.1] defines peer to peer communication over powerline medium. | - | 2.0 |
InterfaceNumberOfEntries | unsignedInt | R | The number of entries in the Interface table. | - | 2.0 |
Device.HomePlug.Interface.{i}. | object(0:) | R | HomePlug interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each table entry models the PHY and MAC levels of a HomePlug interface [HPAV1.1]. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.0 |
Enable | boolean | W | Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.0 |
Status | string | R | The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the interface as assigned by the CPE. | - | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the interface entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. | - | 2.0 |
Upstream | boolean | R | Indicates whether the interface points towards the Internet (true) or towards End Devices (false).
For example:
|
- | 2.0 |
MACAddress | string(:17) | R | [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. | - | 2.0 |
LogicalNetwork | string(:64) | W | The textual name of the HomePlug Logical Network. | - | 2.0 |
Version | string(:16) | R | Indicates the HomePlug version of the interface. This element SHOULD be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example: “1.0” “1.1” |
- | 2.0 |
FirmwareVersion | string(:64) | R | The firmware version of the interface. | - | 2.0 |
ForceCCo | boolean | W | Central Coordinator (CCo) selection mode. If false, CCo selection is automatic. If true, the local HomePlug interface is forced to be CCo and all other devices in the Logical Network MUST be set to automatic CCo selection. Typically ForceCCo is set to automatic CCo selection (false). The factory default value MUST be false. |
- | 2.0 |
NetworkPassword | string(:32) | W | The network password of the device. This is a human readable ASCII string that is hashed per the HomePlug specification to generate the Network Membership Key (NMK). Note that care needs to be taken when setting this parameter as it might prohibit communication with other adapters or equipment connected via the powerline network. When read, this parameter returns an empty string, regardless of the actual value. |
- | 2.0 |
OtherNetworksPresent | string[](:64) | R | Comma-separated list (maximum number of characters 64) of strings. Indicates whether any other HomePlug networks are currently visible via this interface. Examples of valid list items include, but are not limited to: “HomePlugAV” “HomePlug1.0” “Other” |
- | 2.0 |
MaxBitRate | unsignedInt | R | The maximum PHY bit rate supported by this interface (expressed in Mbps). | - | 2.0 |
AssociatedDeviceNumberOfEntries | unsignedInt | R | The number of entries in the AssociatedDevice table. | - | 2.0 |
Device.HomePlug.Interface.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsReceived | unsignedInt | R | The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsSent | unsignedLong | R | The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnicastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsSent | unsignedInt | R | The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
DiscardPacketsReceived | unsignedInt | R | The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MulticastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsSent | unsignedLong | R | The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BroadcastPacketsReceived | unsignedLong | R | The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
UnknownProtoPacketsReceived | unsignedInt | R | The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
MPDUTxAck | unsignedLong | R | HomePlug-specific statistic. The Number of MAC Protocol Data Units (MPDUs) Transmitted and Acknowledged. | - | 2.0 |
MPDUTxCol | unsignedLong | R | HomePlug-specific statistic. The Number of MAC Protocol Data Units (MPDUs) Transmitted and Collided | - | 2.0 |
MPDUTxFailed | unsignedLong | R | HomePlug-specific statistic. The Number of MAC Protocol Data Units (MPDUs) Transmitted and Failed | - | 2.0 |
MPDURxAck | unsignedLong | R | HomePlug-specific statistic. The Number of MAC Protocol Data Units (MPDUs) Received and Acknowledged | - | 2.0 |
MPDURxFailed | unsignedLong | R | HomePlug-specific statistic. The Number of MAC Protocol Data Units (MPDUs) Received and Failed | - | 2.0 |
Device.HomePlug.Interface.{i}.AssociatedDevice.{i}. | object(0:) | R | This table contains information about other HomePlug devices connected to this HomePlug interface. At most one entry in this table can exist with a given value for MACAddress. |
- | 2.0 |
MACAddress | string(:17) | R | [MACAddress] MAC address of remote HomePlug device. It is used to uniquely identify and easily correlate with the connected remote HomePlug device. | - | 2.0 |
TxPhyRate | unsignedInt | R | The PHY transmit Rate (expressed in Mbps) to this remote device. | - | 2.0 |
RxPhyRate | unsignedInt | R | The PHY receive Rate (expressed in Mbps) from this remote device. | - | 2.0 |
SNRPerTone | unsignedInt[:1155]() | R | Comma-separated list (up to 1155 items) (length ) of unsigned integers. List items indicate Signal to Noise Ratio (SNR) per tone from this remote device (expressed in 0.1dB). | - | 2.0 |
AvgAttenuation | unsignedInt | R | Average attenuation from this remote device (expressed in 0.1dB). | - | 2.0 |
EndStationMACs | string(:17)[:16]() | R | [MACAddress] Comma-separated list (up to 16 items) (length ) of MAC Addresses. List items represent MAC addresses of end stations bridged by the remote HomePlug device. For example: “11:22:33:AA:BB:CC, 22:33:44:DD:EE:66” | - | 2.0 |
Active | boolean | R | Whether or not this device is currently present in the HomePlug network. The ability to list inactive nodes is OPTIONAL. If the CPE includes inactive nodes in this table, Active MUST be set to false for each inactive node. The length of time an inactive node remains listed in this table is a local matter to the CPE. | - | 2.0 |
Device.UPA. | object | R | Universal Powerline Association [UPA-PLC]. This object contains the Interface and Diagnostics objects. | - | 2.0 |
InterfaceNumberOfEntries | unsignedInt | R | The number of entries in the Interface table. | - | 2.0 |
Device.UPA.Interface.{i}. | object(0:) | R | UPA interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each table entry models the PHY and MAC levels of a UPA interface [UPA-PLC]. At most one entry in this table can exist with a given value for Alias, or with a given value for Name. |
- | 2.0 |
Enable | boolean | W | Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. | - | 2.0 |
Status | string | R | The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:
|
- | 2.0 |
Alias | string(:64) | W | [Alias] A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference. If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069] and described in [Appendix II/TR-069], the following mandatory constraints MUST be enforced:
Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
Name | string(:64) | R | The textual name of the interface as assigned by the CPE. | - | 2.0 |
LastChange | unsignedInt | R | The accumulated time in seconds since the interface entered its current operational state. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
LowerLayers | string[](:1024) | W | Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. | - | 2.0 |
Upstream | boolean | R | Indicates whether the interface points towards the Internet (true) or towards End Devices (false).
For example:
|
- | 2.0 |
MACAddress | string(:17) | R | [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. | - | 2.0 |
FirmwareVersion | string(:64) | R | This interface’s firmware version. | - | 2.0 |
MaxBitRate | unsignedInt | R | The maximum PHY bit rate supported by this interface (expressed in Mbps). | - | 2.0 |
NodeType | string | W | Type of UPA device role. It can be Fixed Access Point (master) or End Point (slave) of the PLC network. Enumeration of:
|
- | 2.0 |
LogicalNetwork | string(:20) | W | The name (network ID) of the logical PLC network in which the local interface is a member (human readable string). | - | 2.0 |
EncryptionMethod | string(:6) | W | Encryption Method used by UPA device. Enumeration of:
|
- | 2.0 |
EncryptionKey | string(:36) | W | Encryption key for secure PLC communications. This a human readable string used by the system to generate the encryption key to encrypt communications in powerline. It takes non extended ASCII characters (i.e. printable 7-bit ASCII character codes 32-126, which includes SPACE but excludes TAB, LF and CR). For example: bvjPekZiYUf9kjNKJASkgJ09adfoP01Fjvgd When read, this parameter returns an empty string, regardless of the actual value. |
- | 2.0 |
PowerBackoffEnabled | boolean | W | Power back-off management feature status in the UPA device. Boolean can be true for “enabled” and false for “disabled”. | - | 2.0 |
PowerBackoffMechanismActive | boolean | R | Show if power back-off mechanism is active at that time in the UPA device. Boolean can be true for “active” and false for “not active”. | - | 2.0 |
EstApplicationThroughput | unsignedInt | R | The estimated application throughput (expressed in Mbps), received from the PLC link. This value can be used to indicate link quality. | - | 2.0 |
ActiveNotchEnable | boolean | W | Enables or disables the ActiveNotch table for this interface. | - | 2.0 |
ActiveNotchNumberOfEntries | unsignedInt | R | The number of entries in the ActiveNotch table. | - | 2.0 |
AssociatedDeviceNumberOfEntries | unsignedInt | R | The number of entries in the AssociatedDevice table. | - | 2.0 |
BridgeForNumberOfEntries | unsignedInt | R | The number of entries in the BridgeFor table. | - | 2.0 |
Device.UPA.Interface.{i}.Stats. | object | R | Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. | - | 2.0 |
BytesSent | unsignedLong | R | The total number of bytes transmitted out of the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
BytesReceived | unsignedLong | R | The total number of bytes received on the interface, including framing characters. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsSent | unsignedLong | R | The total number of packets transmitted out of the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
PacketsReceived | unsignedLong | R | The total number of packets received on the interface. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |
ErrorsSent | unsignedInt | R | The total number of outbound packets that could not be transmitted because of errors. Active Notification requests for this parameter MAY be denied. |
- | 2.0 |