Broadband Forum

    DATA MODEL DEFINITION


TR-069 Device:2.11 Root Object definition
tr-181-2-11-0.xml (changes)

License

Copyright (c) 2010-2017, Broadband Forum

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The above license is used as a license under copyright only. Please reference the Forum IPR Policy for patent licensing terms <https://www.broadband-forum.org/ipr-policy>.

Any moral rights which are necessary to exercise under the above license grant are also deemed granted under this license.

Summary

Table of Contents

Data Types

The Parameters defined in this specification make use of a limited subset of the default SOAP data types [SOAP1.1]. These data types and the named data types used by this specification are described below.

Note: A Parameter that is defined to be one of the named data types is reported as such at the beginning of the Parameter's description via a reference back to the associated data type definition (e.g. [MacAddress]). However, such parameters still indicate their SOAP data type.

Data Type Base Type Description
Alias string(64)

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
base64 -

Base64 encoded binary (no line-length limitation).

A minimum and maximum allowed length can be indicated using the form base64(Min:Max), where Min and Max are the minimum and maximum length in characters before Base64 encoding. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in base64(Max). Multiple comma-separated ranges can be specified, in which case the length MUST be in one of the ranges.

boolean - Boolean, where the allowed values are 0 or 1 (or equivalently, true or false).
dateTime - The subset of the ISO 8601 date-time format defined by the SOAP dateTime type.
hexBinary -

Hex encoded binary.

A minimum and maximum allowed length can be indicated using the form hexBinary(Min:Max), where Min and Max are the minimum and maximum length in characters before Hex Binary encoding. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in hexBinary(Max). Multiple comma-separated ranges can be specified, in which case the length MUST be in one of the ranges.

int -

Integer in the range -2147483648 to +2147483647, inclusive.

For some int types, a value range is given using the form int[Min:Max] or int[Min:Max step Step] where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

long -

Long integer in the range -9223372036854775808 to 9223372036854775807, inclusive.

For some long types, a value range is given using the form long[Min:Max] or long[Min:Max step Step], where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

object - A container for parameters and/or other objects. The full Path Name of a parameter is given by the parameter name appended to the full Path Name of the object it is contained within.
string - For strings, a minimum and maximum allowed length can be indicated using the form string(Min:Max), where Min and Max are the minimum and maximum string length in characters. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in string(Max). Multiple comma-separated ranges can be specified, in which case the string length will be in one of the ranges.
unsignedInt -

Unsigned integer in the range 0 to 4294967295, inclusive.

For some unsignedInt types, a value range is given using the form unsignedInt[Min:Max] or unsigned[Min:Max step Step], where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

unsignedLong -

Unsigned long integer in the range 0 to 18446744073709551615, inclusive.

For some unsignedLong types, a value range is given using the form unsignedLong[Min:Max] or unsignedLong[Min:Max step Step], where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

References

[G.9701] G.9701, Fast access to subscriber terminals (G.fast)- Physical layer specification, ITU-T, 2014.
[G.997.2] G.997.2, Physical layer management for FAST transceivers, ITU-T, 2015.
[RFC2863] RFC 2863, The Interfaces Group MIB, IETF, 2000.
[RFC6120] RFC 6120, Extensible Messaging and Presence Protocol (XMPP) : Core, IETF, 2011.
[SOAP1.1] Simple Object Access Protocol (SOAP) 1.1, W3C.
[TR-069] TR-069, CPE WAN Management Protocol, Broadband Forum, 2004.
[TR-159] TR-159, Management Framework for xDSL Bonding, Broadband Forum, 2008.
[TR-181i2] TR-181 Issue 2, Device Data Model for TR-069, Broadband Forum, 2010.
[WPS 2.0] WSC 2.0, Wi-Fi Simple Configuration Technical Specification Version 2.0.x , Wi-Fi Alliance.
[WPSv1.0] Wi-Fi Protected Setup Specification Version 1.0h, Wi-Fi Alliance, 2006.

Device:2.11 Data Model (changes)

For a given implementation of this data model, the Agent MUST indicate support for the highest version number of any object or parameter that it supports. For example, even if the Agent supports only a single parameter that was introduced in version 2.11, then it will indicate support for version 2.11. The version number associated with each object and parameter is shown in the Version column.

Name Type Write Description Object Default Version
Device. object - The top-level object for a Device. - 2.0
Device.DeviceInfo. object - This object contains general device information. - 2.0
DeviceImageNumberOfEntries unsignedInt - The number of entries in the DeviceImageFile table. - 2.11
Device.DeviceInfo.DeviceImageFile.{i}. object -

This object describes an image of the device.

At most one entry in this table can exist with a given value for Location, or with a given value for Alias.

- 2.11
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.11
Location string -

The location of the device that represents the image as the user looks at the front of the device in its typical orientation (e.g., on-end, flat). Enumeration of:

- 2.11
Image base64 - The device image in PNG, JPEG or GIF format. - 2.11
Device.ManagementServer. object - This object contains parameters relating to the CPE's association with an ACS. - 2.0
HTTPConnectionRequestEnable boolean W

Enables or disables HTTP connection request handling on the CPE.

If HTTP connection request handling is disabled (HTTPConnectionRequestEnable is set to false), ConnectionRequestURL MUST be set to an empty string and the CPE MUST close the port used by the HTTP connection request server.

The factory default value MUST be true.

- 2.11
Device.UserInterface. object - This object contains parameters relating to the user interface of the CPE. - 2.0
Enable boolean W

Enables and disables the CPE's user interface.

The factory default value MUST be true.

- 2.11
Device.UserInterface.Messages. object - Definition of user information message displays. - 2.11
Enable boolean W

Enables and displays the user information message.

The factory default value MUST be true.

- 2.11
Title string­(128) W Message title to be displayed. - 2.11
SubTitle string­(128) W Message sub title to be displayed. - 2.11
Text string W Message text. - 2.11
IconType string W

Icon to be displayed. Enumeration of:

- 2.11
MessageColor hexBinary­(3:3) W The color of message text in RGB hexadecimal notation (e.g., FF0088). - 2.11
BackgroundColor hexBinary­(3:3) W The color of the message screen background in RGB hexadecimal notation (e.g., FF0088). - 2.11
TitleColor hexBinary­(3:3) W The color of the message title in RGB hexadecimal notation (e.g., FF0088). - 2.11
SubTitleColor hexBinary­(3:3) W The color of the sub title in RGB hexadecimal notation (e.g., FF0088). - 2.11
RequestedNumberOfRepetitions unsignedInt W The number of times the device SHOULD repeat the message. - 2.11
ExecutedNumberOfRepetitions unsignedInt - The number of times the device repeated the message. - 2.11
Device.FAST. object - This object models FAST (defined in ITU Recommendation [G.9701]) lines. Each Line models a layer 1 FAST Line interface. - 2.11
LineNumberOfEntries unsignedInt - The number of entries in the Line table. - 2.11
Device.FAST.Line.{i}. object -

FAST Line table (a stackable interface object as described in [Section 4.2/TR-181i2]).

This table models physical FAST lines.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.11
Enable boolean W Enables or disables the FAST line. This parameter is based on ifAdminStatus from [RFC2863]. - 2.11
Status string -

The current operational state of the FAST line (see [Section 4.2.2/TR-181i2]). Enumeration of:

When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface).

When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason.

This parameter is based on ifOperStatus from [RFC2863].

- 2.11
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.11
Name string­(64) - The textual name of the FAST line as assigned by the CPE. - 2.11
LastChange unsignedInt - The accumulated time in seconds since the FAST line entered its current operational state. - 2.11
LowerLayers string­(1024) W

Comma-separated list (maximum list length 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object. If the referenced object is deleted, the corresponding item MUST be removed from the list. See [Section 4.2.1/TR-181i2].

Note: Since Line is a layer 1 interface, it is expected that LowerLayers will not be used.

- 2.11
Upstream boolean -

Indicates whether the interface points towards the Internet (true) or towards End Devices (false).

For example:

  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.11
FirmwareVersion string­(64) - A string identifying the version of the modem firmware currently installed for this interface. This is applicable only when the modem firmware is separable from the overall CPE software. - 2.11
LinkStatus string -

Status of the FAST physical link. Enumeration of:

When LinkStatus is Up, Status is expected to be Up. When LinkStatus is Initializing or EstablishingLink or NoSignal or Disabled, Status is expected to be Down.

The Error value MAY be used by the CPE to indicate a locally defined error condition.

- 2.11
AllowedProfiles string -

Comma-separated list of strings. List items indicate which FAST profiles are allowed on the line. Each list item is an enumeration of:

Note: In G.997.2, this parameter is called PROFILES. See ITU-T Recommendation [G.997.2].

- 2.11
CurrentProfile string - The value MUST be a member of the list reported by the AllowedProfiles parameter, or else be an empty string. Indicates which FAST profile is currently in use on the line. - 2.11
PowerManagementState string -

The power management state of the line. Enumeration of:

Note: See ITU-T Recommendation [G.9701].

- 2.11
SuccessFailureCause unsignedInt­[0:5] -

The success failure cause of the initialization. An enumeration of the following integer values:

  • 0: Successful
  • 1: Configuration error. Configuration error. This error occurs if the line cannot reach L0 state due to a mismatch of configuration and FTU capabilities.
  • 2: Configuration not feasible on the line. This error occurs if the line cannot reach the L0 state due to a mismatch of configuration of line and noise characteristics.
  • 3: Communication problem. This error occurs, for example, due to corrupted messages or bad syntax messages or if no common mode can be selected in the G.994.1 handshaking procedure or due to a timeout.
  • 4: No far-end FTU detected. This error occurs if the far-end FTU is not powered or not connected or if the line is too long to allow detection of a far-end FTU.
  • 5: Any other or unknown initialization failure cause.

Note: In G.997.2, this parameter is called "Initialization success/failure cause". See Clause 7.20.2.1 of ITU-T

Recommendation [G.997.2].

- 2.11
UPBOKLER unsignedInt­[0:1280] -

This parameter reports the estimate of the electrical length expressed in 0.1 dB, as determined by the FTU-R (see clause 7.3.1.4.2.1/[G.9701]) and conveyed in the R-MSG1 initialization message (see clause 12.3.3.2.3/[G.9701]). The value is coded as an unsignedInt in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB.

Note: This parameter is defined as UPBOKLE-R in Clause 7.10.4.2 of ITU-T Recommendation [G.997.2].

- 2.11
LastTransmittedDownstreamSignal unsignedInt­[0:21] -

This parameter reports the downstream signal count of the last transmitted initialization signal in the last full or short initialization performed on the line. The valid values are 0..21. The downstream signal count is defined in clause 12.3.1/[G.9701].

Note: See clause 7.10.2.2 ITU-T Recommendation [G.997.2].

- 2.11
LastTransmittedUpstreamSignal unsignedInt­[0:21] -

This parameter reports the upstream signal count of the last transmitted initialization signal in the last full or short initialization performed on the line. The valid values are 0..21. The upstream signal count is defined in clause 12.3.1/[G.9701].

Note: See clause 7.10.2.3 ITU-T Recommendation [G.997.2].

- 2.11
UPBOKLE unsignedInt­[0:1280] -

This parameter reports the electrical length that would have been sent from the FTU-O to the FTU-R if the electrical length was not forced by the DPU-MIB. If the electrical length is not forced by the DPU-MIB, then this object reports the final electrical length, as determined by the FTU-O (see clause 7.3.1.4.2.1/[G.9701]) and conveyed in the O-UPDATE initialization message (see clause 12.3.3.2.4/[G.9701]).

Note: See clause 7.10.4.1 in ITU-T Recommendation [G.997.2].

- 2.11
LineNumber int­[1:] - Signifies the line pair that the modem is using to connection. LineNumber = 1 is the innermost pair. - 2.11
UpstreamMaxBitRate unsignedInt -

This parameter reports the attainable net data rate expressed in Kbps as defined in clause 11.4.1.1.2/[G.9701].

Note: This parameter is related to the G.997.2 parameter ATTNDRus. See clause 7.11.2.1 ITU-T Recommendation [G.997.2].

- 2.11
DownstreamMaxBitRate unsignedInt -

This parameter reports the attainable net data rate expressed in Kbps as defined in clause 11.4.1.1.2/[G.9701].

Note: This parameter is related to the G.997.2 parameter ATTNDRds. See clause 7.11.2.1 ITU-T Recommendation [G.997.2].

- 2.11
UpstreamNoiseMargin int -

This parameter reports the signal-to-noise ratio margin (as defined in clause 9.8.3.2/[G.9701] and 11.4.1.3/[G.9701]) in the upstream direction. A special value indicates that the signal-to-noise ratio margin is out of the range to be represented. The parameter is expressed in 0.1dB.

Note: In G.997.2, this parameter is called SNRMus. See ITU-T Recommendation [G.997.2].

- 2.11
DownstreamNoiseMargin int -

This parameter reports the signal-to-noise ratio margin (as defined in clause 9.8.3.2/[G.9701] and 11.4.1.3/[G.9701]) in the upstream direction. A special value indicates that the signal-to-noise ratio margin is out of the range to be represented. The parameter is expressed in 0.1dB.

Note: In G.997.2, this parameter is called SNRMds. See ITU-T Recommendation [G.997.2].

- 2.11
UpstreamAttenuation int - The current upstream signal loss (expressed in 0.1dB). - 2.11
DownstreamAttenuation int - The current downstream signal loss (expressed in 0.1dB). - 2.11
UpstreamPower int - The current output power at the CPE's FAST line (expressed in 0.1dBmV). - 2.11
DownstreamPower int - The current received power at the CPE's FAST line (expressed in 0.1dBmV). - 2.11
SNRMRMCds int - This parameter reports the signal-to-noise margin for the robust management channel (RMC) in the downstream direction (express in 0.1dB). A special value (-512) indicates that the signal-to-noise ratio margin for the RMC is out of the range to be represented. This parameter is defined in clauses 7.10.12.1 of ITU-T Recommendation [G.997.2]. - 2.11
SNRMRMCus int - This parameter reports the signal-to-noise margin for the robust management channel (RMC) in the upstream direction (express in 0.1dB). A special value (-512) indicates that the signal-to-noise ratio margin for the RMC is out of the range to be represented. This parameter is defined in clauses 7.10.12.2 of ITU-T Recommendation [G.997.2]. - 2.11
BITSRMCpsds string­(4610) - Comma-separated list (maximum list length 4610) of integers. List items report the bit allocation values on RMC sub-carriers in RMC symbols in the downstream direction. Each pair composes of a sub-carrier index from 0..4095 and an 8 bit allocation value. There are maximum 512 pairs. This parameter is defined in clause 7.10.12.3 of ITU-T Recommendation [G.997.2]. - 2.11
BITSRMCpsus string­(4610) - Comma-separated list (maximum list length 4610) of integers. List items report the bit allocation values on RMC sub-carriers in RMC symbols in the upstream direction. Each pair composes of a sub-carrier index from 0..4095 and an 8 bit allocation value. There are maximum 512 pairs. This parameter is defined in clause 7.10.12.4 of ITU-T Recommendation [G.997.2]. - 2.11
FEXTCANCELds boolean - This indicates whether FEXT cancellation in the downstream direction from all the other vectored lines into the line in the vectored group is enabled (TRUE) or disabled (FALSE). This parameter is defined as FEXT_TO_CANCEL_ENABLEds in clause 7.1.7.1 of ITU Recommendation [G.997.2]. - 2.11
FEXTCANCELus boolean - This indicates whether FEXT cancellation in the upstream direction from all the other vectored lines into the line in the vectored group is enabled (TRUE) or disabled (FALSE). This parameter is defined as FEXT_TO_CANCEL_ENABLEds in clause 7.1.7.1 of ITU Recommendation [G.997.2]. - 2.11
ETRds unsignedInt - This parameter reports the expected throughput rate expressed in Kbps as defined in clause 7.11.1.2 of ITU-T Recommendation [G.997.2] - 2.11
ETRus unsignedInt - This parameter reports the expected throughput rate expressed in Kbps as defined in clause 7.11.1.2 of ITU-T Recommendation [G.997.2] - 2.11
ATTETRds unsignedInt - This parameter reports the attainable expected throughput expressed in Kbps as defined in clause 7.11.2.2 of ITU-T Recommendation [G.997.2] - 2.11
ATTETRus unsignedInt - This parameter reports the attainable expected throughput expressed in Kbps as defined in clause 7.11.2.2 of ITU-T Recommendation [G.997.2] - 2.11
MINEFTR unsignedInt - This parameter reports the minimum error free throughput value expressed in Kbps computed from power up as defined in clause 11.4.1.1.3 of ITU-T Recommendation [G.9701] - 2.11
Device.FAST.Line.{i}.Stats. object -

Throughput statistics for this interface.

The CPE MUST reset the interface's Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface's Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface's Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2].

- 2.11
BytesSent unsignedLong - The total number of bytes transmitted out of the interface, including framing characters. - 2.11
BytesReceived unsignedLong - The total number of bytes received on the interface, including framing characters. - 2.11
PacketsSent unsignedLong - The total number of packets transmitted out of the interface. - 2.11
PacketsReceived unsignedLong - The total number of packets received on the interface. - 2.11
ErrorsSent unsignedInt - The total number of outbound packets that could not be transmitted because of errors. - 2.11
ErrorsReceived unsignedInt - The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. - 2.11
DiscardPacketsSent unsignedInt - The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. - 2.11
DiscardPacketsReceived unsignedInt - The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. - 2.11
TotalStart unsignedInt -

FAST-specific statistic. The Number of seconds since the beginning of the period used for collection of Total statistics.

Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible.

Note: TotalStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

- 2.11
ShowtimeStart unsignedInt -

FAST-specific statistic. The Number of seconds since the most recent DSL Showtime - the beginning of the period used for collection of Showtime statistics.

Showtime is defined as successful completion of the DSL link establishment process. The Showtime statistics are those collected since the most recent establishment of the DSL link.

Note: ShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

- 2.11
LastShowtimeStart unsignedInt -

FAST-specific statistic. The Number of seconds since the second most recent DSL Showtime-the beginning of the period used for collection of LastShowtime statistics.

If the CPE has not retained information about the second most recent Showtime (e.g., on reboot), the start of LastShowtime statistics MAY temporarily coincide with the start of Showtime statistics.

Note: LastShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

- 2.11
CurrentDayStart unsignedInt -

FAST-specific statistic. The Number of seconds since the beginning of the period used for collection of CurrentDay statistics.

The CPE MAY align the beginning of each CurrentDay interval with days in the UTC time zone, but is not required to do so.

Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible.

Note: CurrentDayStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

- 2.11
QuarterHourStart unsignedInt -

FAST-specific statistic. The Number of seconds since the beginning of the period used for collection of QuarterHour statistics.

The CPE MAY align the beginning of each QuarterHour interval with real-time quarter-hour intervals, but is not required to do so.

Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible.

Note: QuarterHourStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

- 2.11
Device.FAST.Line.{i}.Stats.Total. object -

This object contains DSL line total statistics.

Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

- 2.11
ErroredSecs unsignedInt - Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives. - 2.11
SeverelyErroredSecs unsignedInt - Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2]. - 2.11
LOSS unsignedInt - Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects. - 2.11
LORS unsignedInt - Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects. - 2.11
UAS unsignedInt - Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2]. - 2.11
RTXUC unsignedInt - This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2]. - 2.11
RTXTX unsignedInt - This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2]. - 2.11
SuccessBSW unsignedInt - This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2]. - 2.11
SuccessSRA unsignedInt - This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2]. - 2.11
SuccessFRA unsignedInt - This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2]. - 2.11
SuccessRPA unsignedInt - This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2]. - 2.11
SuccessTIGA unsignedInt - This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2]. - 2.11
Device.FAST.Line.{i}.Stats.Showtime. object -

This object contains FAST line statistics since the most recent showtime.

Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

- 2.11
ErroredSecs unsignedInt - Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives. - 2.11
SeverelyErroredSecs unsignedInt - Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2]. - 2.11
LOSS unsignedInt - Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects. - 2.11
LORS unsignedInt - Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects. - 2.11
UAS unsignedInt - Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2]. - 2.11
RTXUC unsignedInt - This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2]. - 2.11
RTXTX unsignedInt - This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2]. - 2.11
SuccessBSW unsignedInt - This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2]. - 2.11
SuccessSRA unsignedInt - This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2]. - 2.11
SuccessFRA unsignedInt - This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2]. - 2.11
SuccessRPA unsignedInt - This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2]. - 2.11
SuccessTIGA unsignedInt - This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2]. - 2.11
Device.FAST.Line.{i}.Stats.LastShowtime. object -

This object contains FAST line statistics since the second most recent showtime.

Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

- 2.11
ErroredSecs unsignedInt - Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives. - 2.11
SeverelyErroredSecs unsignedInt - Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2]. - 2.11
LOSS unsignedInt - Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects. - 2.11
LORS unsignedInt - Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects. - 2.11
UAS unsignedInt - Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2]. - 2.11
RTXUC unsignedInt - This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2]. - 2.11
RTXTX unsignedInt - This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2]. - 2.11
SuccessBSW unsignedInt - This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2]. - 2.11
SuccessSRA unsignedInt - This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2]. - 2.11
SuccessFRA unsignedInt - This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2]. - 2.11
SuccessRPA unsignedInt - This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2]. - 2.11
SuccessTIGA unsignedInt - This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2]. - 2.11
Device.FAST.Line.{i}.Stats.CurrentDay. object -

This object contains FAST line statistics accumulated during the current day.

Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

- 2.11
ErroredSecs unsignedInt - Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives. - 2.11
SeverelyErroredSecs unsignedInt - Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2]. - 2.11
LOSS unsignedInt - Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects. - 2.11
LORS unsignedInt - Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects. - 2.11
UAS unsignedInt - Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2]. - 2.11
RTXUC unsignedInt - This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2]. - 2.11
RTXTX unsignedInt - This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2]. - 2.11
SuccessBSW unsignedInt - This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2]. - 2.11
SuccessSRA unsignedInt - This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2]. - 2.11
SuccessFRA unsignedInt - This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2]. - 2.11
SuccessRPA unsignedInt - This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2]. - 2.11
SuccessTIGA unsignedInt - This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2]. - 2.11
Device.FAST.Line.{i}.Stats.QuarterHour. object -

This object contains FAST line statistics accumulated during the current quarter hour.

Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

- 2.11
ErroredSecs unsignedInt - Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives. - 2.11
SeverelyErroredSecs unsignedInt - Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2]. - 2.11
LOSS unsignedInt - Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects. - 2.11
LORS unsignedInt - Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects. - 2.11
UAS unsignedInt - Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2]. - 2.11
RTXUC unsignedInt - This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2]. - 2.11
RTXTX unsignedInt - This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2]. - 2.11
SuccessBSW unsignedInt - This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2]. - 2.11
SuccessSRA unsignedInt - This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2]. - 2.11
SuccessFRA unsignedInt - This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2]. - 2.11
SuccessRPA unsignedInt - This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2]. - 2.11
SuccessTIGA unsignedInt - This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2]. - 2.11
Device.FAST.Line.{i}.TestParams. object - This object contains the FAST line test parameters that are available during the L0 (i.e., Showtime) state. - 2.11
SNRGds unsignedInt -

Reports the number of sub-carriers in any one sub-carrier group used to represent the downstream SNR(f) values. Valid values are 1, 2, 4, and 8.

Note: In ITU-T G.9701-2014, the only valid value is G = 1. See clause 7.10.8.2 ITU-T Recommendation [G.997.2].

- 2.11
SNRGus unsignedInt -

Reports the number of sub-carriers in any one sub-carrier group used to represent the upstream SNR(f) values. Valid values are 1, 2, 4, and 8.

Note: In ITU-T G.9701-2014, the only valid value is G = 1. See clause 7.10.8.5 ITU-T Recommendation [G.997.2].

- 2.11
SNRpsds string­(2047) -

Comma-separated list (maximum list length 2047) of integers. Reports the downstream SNR(f) values. A special value indicates that no measurement could be done for this sub-carrier group because it is out of the downstream MEDLEY set or its transmit power is zero. The number of elements will depend on the value of SNRGds. Interpretation of the values is as defined in clause 11.4.1.2.2.of ITU-T Rec. [G.9701].

Note: See clause 7.10.8.3 of ITU-T Recommendation [G.997.2].

- 2.11
SNRpsus string­(2047) -

Comma-separated list (maximum list length 2047) of strings. Reports the upstream SNR(f) values. A special value indicates that no measurement could be done for this sub-carrier group because it is out of the downstream MEDLEY set or its transmit power is zero. The number of elements will depend on the value of SNRGds. Interpretation of the values is as defined in clause 11.4.1.2.2.of ITU-T Rec. [G.9701].

Note: See clause 7.10.8.6 of ITU-T Recommendation [G.997.2].

- 2.11
SNRMTds unsignedInt -

Reports the number of symbols used to measure the downstream SNR(f) values. The valid values 0..65535.

Note: See clause 7.10.8.1 of ITU-T Recommendation [G.997.2].

- 2.11
SNRMTus unsignedInt -

Reports the number of symbols used to measure the upstream SNR(f) values. The valid values 0..65535.

Note: See clause 7.10.8.4 of ITU-T Recommendation [G.997.2].

- 2.11
ACTINP unsignedInt -

Reports the actual INP against SHINE as defined in clause 11.4.1.1.7/[G.9701]. A special value indicates an actual INP against SHINE of 2047 symbols or higher. The valid values are 0..2046 and 2047 is the special value.

Note: See ITU-T Recommendation [G.997.2].

- 2.11
NFEC unsignedInt -

Reports the DTU FEC codeword length (expressed in 1 byte unit) as defined in clause 9.3/[G.9701]. The valid range is 32..255.

Note: See clause 7.11.4.1 ITU-T Recommendation [G.997.2].

- 2.11
RFEC int -

Reports the DTU FEC codeword redundancy as defined in clause 9.3/[G.9701].

Note: See ITU-T Recommendation [G.997.2].

- 2.11
UpstreamCurrRate unsignedInt -

Reports the current physical layer aggregate data rate (expressed in Kbps) of the upstream FAST as defined in clause 11.4.1.1.1/[G.9701].

The current physical layer aggregate data rate (expressed in Kbps) of the upstream FAST connection. The valid values are 0..4294967295(0 to 232-1 kbit/s).

- 2.11
DownstreamCurrRate unsignedInt -

Reports the current physical layer aggregate data rate (expressed in Kbps) of the upstream FAST as defined in clause 11.4.1.1.1/[G.9701].

The current physical layer aggregate data rate (expressed in Kbps) of the downstream FAST connection. The valid values are 0..4294967295(0 to 232-1 kbit/s).

- 2.11
ACTINPREIN unsignedInt - Reports the actual INP against REIN as defined in clause 11.4.1.1.8/[G.9701]. A special value indicates an actual INP against REIN of 63 symbols or higher. The valid range is 0..62 symbols, and 63 is the special value. - 2.11
Device.WiFi. object - The WiFi object is based on the WiFi Alliance 802.11 specifications ([802.11-2007]). It defines interface objects (Radio and SSID), and application objects (AccessPoint and EndPoint). - 2.0
Device.WiFi.Radio.{i}. object -

This object models an 802.11 wireless radio on a device (a stackable interface object as described in [Section 4.2/TR-181i2]).

If the device can establish more than one connection simultaneously (e.g. a dual radio device), a separate Radio instance MUST be used for each physical radio of the device. See [Appendix III.1/TR-181i2] for additional information.

Note: A dual-band single-radio device (e.g. an 802.11a/b/g radio) can be configured to operate at 2.4 or 5 GHz frequency bands, but only a single frequency band is used to transmit/receive at a given time. Therefore, a single Radio instance is used even for a dual-band radio.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.0
CurrentOperatingChannelBandwidth string -

The channel bandwidth currently in use. Enumeration of:

- 2.11
Device.WiFi.AccessPoint.{i}. object W

This object models an 802.11 connection from the perspective of a wireless access point. Each AccessPoint entry is associated with a particular SSID interface instance via the SSIDReference parameter.

For enabled table entries, if SSIDReference is not a valid reference then the table entry is inoperable and the CPE MUST set Status to Error_Misconfigured.

Note: The AccessPoint table includes a unique key parameter that is a strong reference. If a strongly referenced object is deleted, the CPE will set the referencing parameter to an empty string. However, doing so under these circumstances might cause the updated AccessPoint row to then violate the table's unique key constraint; if this occurs, the CPE MUST set Status to Error_Misconfigured and disable the offending AccessPoint row.

At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries.

At most one enabled entry in this table can exist with a given value for SSIDReference.

- 2.0
Device.WiFi.AccessPoint.{i}.Security. object - This object contains security related parameters that apply to a CPE acting as an Access Point [802.11-2007]. - 2.0
MFPConfig string W

Management Frame Protection configuration applicable when ModeEnabled is set to WPA2-Personal or WPA2-Enterprise. Enumeration of:

"Disabled" 2.11
Device.WiFi.AccessPoint.{i}.WPS. object - This object contains parameters related to Wi-Fi Protected Setup for this access point (as specified in [WPSv1.0] or {bibref|WPSv2.0}}). - 2.0
Status string -

string. Indicates the current status of WPS. If the device goes to SetupLocked the WPS needs to be disabled and re-enabled to come out of state. Enumeration of:

- 2.11
Version string -

The Wi-Fi Simple Configuration version supported by the device, a string of the form m.n where m is the major version and n is the minor version.

For example, a value of 1.0 denotes WSC 1.0 and a value of 2.0 denotes WSC 2.0.

- 2.11
PIN string­(8) W

Represents the Device PIN used for PIN based pairing between WPS peers. This PIN is either a four digit number or an eight digit number.

When read, this parameter returns an empty string, regardless of the actual value.

Possible patterns:

- 2.11
Device.WiFi.EndPoint.{i}. object W

This object models an 802.11 connection from the perspective of a wireless end point. Each EndPoint entry is associated with a particular SSID interface instance via the SSIDReference parameter, and an associated active Profile instance via the ProfileReference parameter. The active profile is responsible for specifying the actual SSID and security settings used by the end point.

For enabled table entries, if SSIDReference or ProfileReference is not a valid reference then the table entry is inoperable and the CPE MUST set Status to Error_Misconfigured.

Note: The EndPoint table includes a unique key parameter that is a strong reference. If a strongly referenced object is deleted, the CPE will set the referencing parameter to an empty string. However, doing so under these circumstances might cause the updated EndPoint row to then violate the table's unique key constraint; if this occurs, the CPE MUST set Status to Error_Misconfigured and disable the offending EndPoint row.

At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries.

At most one enabled entry in this table can exist with a given value for SSIDReference.

- 2.0
Device.WiFi.EndPoint.{i}.Profile.{i}. object W

EndPoint Profile table.

At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries.

At most one enabled entry in this table can exist with all the same values for SSID, Location and Priority.

- 2.0
Device.WiFi.EndPoint.{i}.Profile.{i}.Security. object - This object contains security related parameters that apply to a WiFi End Point profile [802.11-2007]. - 2.0
MFPConfig string W

Management Frame Protection configuration applicable when ModeEnabled is set to WPA2-Personal or WPA2-Enterprise. Enumeration of:

"Disabled" 2.11
Device.WiFi.EndPoint.{i}.WPS. object - This object contains parameters related to Wi-Fi Protected Setup [WPSv1.0] for this end point. - 2.0
Status string -

string. Indicates the current status of WPS in EndPoint. Enumeration of:

- 2.11
Version string -

The Wi-Fi Simple Configuration version supported by the device, a string of the form m.n where m is the major version and n is the minor version.

For example, a value of 1.0 denotes WSC 1.0 and a value of 2.0 denotes WSC 2.0.

- 2.11
PIN unsignedInt­[4, 8] W

Represents the Device PIN used for PIN based pairing between WPS peers. This PIN is either a four digit number or an eight digit number.

When read, this parameter returns 0, regardless of the actual value.

- 2.11
Device.XMPP. object - The XMPP represents the XMPP capabilities of the device as described in [Appendix III/TR-069a5]. - 2.7
SupportedServerConnectAlgorithms string -

The algorithms supported by the CPE for resolving XMPP server addresses and ports. Enumeration of:

  • DNS-SRV (Use the preferred connection algorithm as specified in [Section 3.2.1/RFC6120] where the value of the Connection.{i}.Domain parameter is used to look up the server address and port to use)
  • DNS (Use the fallback connection mechanism as specified in [Section 3.2.2/RFC6120], where the value of the Connection.{i}.Domain parameter is used to look up the server address, and the port is the xmpp-client port (5222))
  • ServerTable (Use the instances of the Connection.{i}.Server table based on the values of the Connection.{i}.Server.{i}.Priority and Connection.{i}.Server.{i}.Weight parameters as the basis for reconnect. Instances MUST be reachable and reachable instances with the lowest value MUST be preferred)
- 2.11
Device.LEDs. object - This object describes the LEDs on the device. - 2.11
LEDNumberOfEntries unsignedInt - The number of entries in the LED table. - 2.11
Device.LEDs.LED.{i}. object -

Each instance of this object describes an LED on the device.

The default illumination characteristics (e.g., Color, Brightness) of an in use LED is vendor specific. When a cycle completes (i.e., CyclePeriodRepetitions = 0), the LED reverts back to its default illumination characteristics.

When the value of the Status parameter is Controlled, then the value of CycleElementNumberOfEntries and CycleElementNumberOfEntries parameters SHOULD be 0.

When the value of the RelativeXPosition and RelativeYPosition parameters are 0, this indicates that the position of the LED is unknown.

At most one entry in this table can exist with a given value for Name, or with a given value for Alias.

- 2.11
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.11
Name string W The internal name used to identify this LED. - 2.11
Status string -

The status of the LED. Enumeration of:

  • Disabled (The LED is currently not in use)
  • InUse (The LED is currently being used by the CPE)
  • Controlled (Indicates that the LED is controlled from an electronic circuit which cannot be monitored)
  • Error (The LED status cannot be determined by the CPE)
- 2.11
Reason string - The textual purpose that represents the visual display of the LED (e.g., Broadband Down). - 2.11
CyclePeriodRepetitions int­[-1:] - The number of cycle periods left for this LED. As each cycle period is completed this parameter is reduced by 1. A value of -1 indicates an infinite number of cycle period repetitions. - 2.11
Location string -

The location of the LED as the user looks at the front of the device in its typical orientation (e.g., on-end, flat). Enumeration of:

- 2.11
RelativeXPosition unsignedInt - The relative x position of the LED from left to right (x) and top to bottom (y) as the user looks at the device from the orientation identified in the Location parameter in its typical orientation (e.g., on-end, flat). - 2.11
RelativeYPosition unsignedInt - The relative y position of the LED from left to right (x) and top to bottom (y) as the user looks at the device from the orientation identified in the Location parameter in its typical orientation (e.g., on-end, flat). - 2.11
CycleElementNumberOfEntries unsignedInt - The number of entries in the CycleElement table. - 2.11
Device.LEDs.LED.{i}.CycleElement.{i}. object W

Each instance of this object describes the LED characteristics for a portion of the LED cycle period.

The pattern of lighting for the LED corresponding to this table (i.e., the LED cycle period) is defined by the illumination of the LED according to the entries in this table, taken sequentially in the order specified by the Order parameter, with the duration for the portion of the LED illumination corresponding to a given instance specified by the Duration parameter.

The other parameters of the instance of this object (e.g., Color, Brightness) describes the illumination characteristics applied to the LED for this CycleElement instance.

The length of the complete LED cycle is the sum of the Duration parameters for all of the entries in this table.

At most one entry in this table (regardless of whether or not it is enabled) can exist with a given value for Alias. On creation of a new table entry, the Agent MUST choose an initial value for Alias such that the new entry does not conflict with any existing entries.

At most one enabled entry in this table can exist with a given value for Order.

- 2.11
Alias string­(64) W

A non-volatile handle used to reference this instance. Alias provides a mechanism for an ACS to label this instance for future reference.

If the CPE supports the Alias-based Addressing feature as defined in [Section 3.6.1/TR-069a4] and described in [Appendix II/TR-069a4], the following mandatory constraints MUST be enforced:

  • Its value MUST NOT be empty.
  • Its value MUST start with a letter.
  • If its value is not assigned by the ACS, it MUST start with a "cpe-" prefix.
  • The CPE MUST NOT change the parameter value.
- 2.11
Enable boolean W Enables or disables this CycleElement instance. - 2.11
Order unsignedInt­[1:] W The relative order of this CycleElement in the LED's cycle period. - 2.11
Color hexBinary­(3:3) W

The color being displayed by the LED RGB hexadecimal notation (e.g., FF0088).

Note: If the parameter is set to an unsupported color the CPE MUST NOT infer a different color.

- 2.11
Duration unsignedInt W The duration, in milliseconds, for this element of the cycle period. - 2.11
FadeInterval unsignedInt W

The interval corresponding to this CycleElement instance, in milliseconds, from the starting from the target illumination characteristics of the previous CycleElement instance to the target illumination characteristics of this CycleElement instance.

The transition to the target illumination characteristics is uniformly interpolated "perceptually" over the value of this FadeInterval parameter.

- 2.11
Device.LEDs.LED.{i}.CurrentCycleElement. object - This object describes the status of the current cycle element for this LED. - 2.11
CycleElementReference string -

This object describes the current properties of the CycleElement.{i} object instance that is currently active.

The value MUST be the Path Name of a row in the CycleElement table. If the referenced object is deleted, the parameter value MUST be set to an empty string. If the LED instances does not have a current cycle element active, this parameter MUST be set to an empty string.

- 2.11
Color hexBinary­(3:3) - The color, formatted as RGB hexadecimal notation (e.g., FF0088), that is currently being displayed by the LED. - 2.11
Duration unsignedInt - The remaining duration, in milliseconds, for this element of the cycle period. - 2.11

Inform and Notification Requirements

Forced Inform Parameters

Parameter

Forced Active Notification Parameters

Parameter

Default Active Notification Parameters

Parameter

Parameters for which Active Notification MAY be Denied

Parameter
Device.DeviceInfo.DeviceImageFile.{i}.
Alias
Device.FAST.Line.{i}.
Alias
LastChange
UpstreamMaxBitRate
DownstreamMaxBitRate
UpstreamNoiseMargin
DownstreamNoiseMargin
UpstreamAttenuation
DownstreamAttenuation
UpstreamPower
DownstreamPower
SNRMRMCds
SNRMRMCus
BITSRMCpsds
BITSRMCpsus
ETRds
ETRus
ATTETRds
ATTETRus
MINEFTR
Device.FAST.Line.{i}.Stats.
BytesSent
BytesReceived
PacketsSent
PacketsReceived
ErrorsSent
ErrorsReceived
DiscardPacketsSent
DiscardPacketsReceived
TotalStart
ShowtimeStart
LastShowtimeStart
CurrentDayStart
QuarterHourStart
Device.FAST.Line.{i}.Stats.Total.
ErroredSecs
SeverelyErroredSecs
LOSS
LORS
UAS
RTXUC
RTXTX
SuccessBSW
SuccessSRA
SuccessFRA
SuccessRPA
SuccessTIGA
Device.FAST.Line.{i}.Stats.Showtime.
ErroredSecs
SeverelyErroredSecs
LOSS
LORS
UAS
RTXUC
RTXTX
SuccessBSW
SuccessSRA
SuccessFRA
SuccessRPA
SuccessTIGA
Device.FAST.Line.{i}.Stats.LastShowtime.
ErroredSecs
SeverelyErroredSecs
LOSS
LORS
UAS
RTXUC
RTXTX
SuccessBSW
SuccessSRA
SuccessFRA
SuccessRPA
SuccessTIGA
Device.FAST.Line.{i}.Stats.CurrentDay.
ErroredSecs
SeverelyErroredSecs
LOSS
LORS
UAS
RTXUC
RTXTX
SuccessBSW
SuccessSRA
SuccessFRA
SuccessRPA
SuccessTIGA
Device.FAST.Line.{i}.Stats.QuarterHour.
ErroredSecs
SeverelyErroredSecs
LOSS
LORS
UAS
RTXUC
RTXTX
SuccessBSW
SuccessSRA
SuccessFRA
SuccessRPA
SuccessTIGA
Device.FAST.Line.{i}.TestParams.
SNRGds
SNRGus
SNRpsds
SNRpsus
SNRMTds
SNRMTus
ACTINP
NFEC
RFEC
UpstreamCurrRate
DownstreamCurrRate
ACTINPREIN
Device.LEDs.LED.{i}.
Alias
Reason
CyclePeriodRepetitions
Device.LEDs.LED.{i}.CycleElement.{i}.
Alias
Device.LEDs.LED.{i}.CurrentCycleElement.
CycleElementReference
Color
Duration

Profile Definitions

Notation

The following abbreviations are used to specify profile requirements:

Abbreviation Description
R Read support is REQUIRED.
W Both Read and Write support is REQUIRED. This MUST NOT be specified for a parameter that is defined as read-only.
P The object is REQUIRED to be present.
C Creation and deletion of instances of the object is REQUIRED.
A Creation of instances of the object is REQUIRED, but deletion is not REQUIRED.
D Deletion of instances of the object is REQUIRED, but creation is not REQUIRED.

LEDBasic:1 Profile

This table defines the LEDBasic:1 profile for the Device:2 data model. The minimum REQUIRED version for this profile is Device:2.11.

Name Requirement
Device.­LEDs. P
LEDNumberOfEntries R
Device.­LEDs.­LED.­{i}. P
Name R
Status R
Reason R
CyclePeriodRepetitions R
Location R
RelativeXPosition R
RelativeYPosition R
CycleElementNumberOfEntries R
Device.­LEDs.­LED.­{i}.­CycleElement.­{i}. P
Order R
Color R
Duration R
FadeInterval R
Device.­LEDs.­LED.­{i}.­CurrentCycleElement. P
CycleElementReference R
Color R
Duration R

LEDAdv:1 Profile

This table defines the LEDAdv:1 profile for the Device:2 data model. The minimum REQUIRED version for this profile is Device:2.11.

Name Requirement
Device.­LEDs. P
LEDNumberOfEntries R
Device.­LEDs.­LED.­{i}. P
Name W
Status R
Reason R
CyclePeriodRepetitions R
Location R
RelativeXPosition R
RelativeYPosition R
CycleElementNumberOfEntries R
Device.­LEDs.­LED.­{i}.­CycleElement.­{i}. C
Enable W
Order W
Color W
Duration W
FadeInterval W
Device.­LEDs.­LED.­{i}.­CurrentCycleElement. P
CycleElementReference R
Color R
Duration R

DeviceImage:1 Profile

This table defines the DeviceImage:1 profile for the Device:2 data model. The minimum REQUIRED version for this profile is Device:2.11.

Name Requirement
Device.­DeviceInfo. P
DeviceImageNumberOfEntries R
Device.­DeviceInfo.­DeviceImageFile.­{i}. P
Location R
Image R

FAST:1 Profile

This table defines the FAST:1 profile for the Device:2 data model. The minimum REQUIRED version for this profile is Device:2.11. Note: This profile is valid for G.9701 modems.

Name Requirement
Device.­FAST. P
LineNumberOfEntries R
Device.­FAST.­Line.­{i}. P
Enable W
Status R
Alias W
Name R
LastChange R
Upstream R
AllowedProfiles R
CurrentProfile R
UPBOKLE R
UpstreamMaxBitRate R
DownstreamMaxBitRate R
UpstreamNoiseMargin R
DownstreamNoiseMargin R
UpstreamAttenuation R
DownstreamAttenuation R
UpstreamPower R
DownstreamPower R
SNRMRMCds R
SNRMRMCus R
FEXTCANCELds R
FEXTCANCELus R
ETRds R
ETRus R
ATTETRds R
ATTETRus R
MINEFTR R
Device.­FAST.­Line.­{i}.­Stats. P
BytesSent R
BytesReceived R
PacketsSent R
PacketsReceived R
ErrorsSent R
ErrorsReceived R
Device.­FAST.­Line.­{i}.­TestParams. P
SNRGds R
SNRGus R
SNRpsds R
SNRpsus R
SNRMTds R
SNRMTus R

UserInformationBasic:1 Profile

This table defines the UserInformationBasic:1 profile for the Device:2 data model. The minimum REQUIRED version for this profile is Device:2.11.

Name Requirement
Device.­UserInterface.­Messages. P
Title W
SubTitle W
Text W

UserInformationExtended:1 Profile

This table defines the UserInformationExtended:1 profile for the Device:2 data model. The minimum REQUIRED version for this profile is Device:2.11.

Name Requirement
Device.­UserInterface.­Messages. P
Title W
SubTitle W
Text W
IconType W
MessageColor W
BackgroundColor W
TitleColor W
SubTitleColor W
RequestedNumberOfRepetitions W
ExecutedNumberOfRepetitions R


Generated by Broadband Forum report.pl#422 (2018/03/28 version) on 2018/04/02 at 12:22:01.
report.pl --exitcode=fatals --cwmpindex=.. --nofontstyles --nowarnreport --quiet --lastonly --report=html --outfile=tr-181-2-11-0-diffs.html tr-181-2-11-0.xml