TR-098 Amendment 3 Organizationally unique identifier of the device manufacturer. Represented as a six hexadecimal-digit value using all upper-case letters and including any leading zeros. {{pattern}} The value MUST be a valid OUI as defined in {{bibref|OUI}}. This value MUST remain fixed over the lifetime of the device, including across firmware updates. Any change would indicate that it's a new device and would therefore require a BOOTSTRAP Inform. Identifier of the class of product for which the serial number applies. That is, for a given manufacturer, this parameter is used to identify the product or class of product over which the {{param|SerialNumber}} parameter is unique. This value MUST remain fixed over the lifetime of the device, including across firmware updates. Any change would indicate that it's a new device and would therefore require a BOOTSTRAP Inform. Identifier of the particular device that is unique for the indicated class of product and manufacturer. This value MUST remain fixed over the lifetime of the device, including across firmware updates. Any change would indicate that it's a new device and would therefore require a BOOTSTRAP Inform. {{datatype|expand}} {{datatype|expand}} This parameter can only be modified if {{param|StaticRoute}} is {{true}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} {{datatype|expand}} Note: There is no guarantee that the {{param}} value on automatically-created {{object}} instances will be retained. This is because automatically-created {{object}} instances can be transitory. {{datatype|expand}} {{datatype|expand}} Note: There is no guarantee that the {{param}} value on automatically-created {{object}} instances will be retained. This is because automatically-created {{object}} instances can be transitory. Indicates whether or not the Alias-Based Addressing Mechanism is supported. A {{true}} value indicates that the CPE supports the Alias-Based Addressing Mechanism, as defined in {{bibref|TR-069a4|3.6.1}} and described in {{bibref|TR-069a4|Appendix II}}. Instance identification mode as defined in {{bibref|TR-069a4|3.6.1}}. When {{param|AliasBasedAddressing}} is {{true}}, {{param}} is used by the ACS to control whether the CPE will use Instance Numbers or Instance Aliases in returned Path Names. {{enum}} This parameter is REQUIRED for any CPE supporting Alias-Based Addressing. Enable or disable the Auto-Create Instance Mechanism. When {{param|AliasBasedAddressing}} is {{true}}, {{param}} indicates whether or not the CPE will automatically create instances while processing a SetParameterValues RPC (as defined in {{bibref|TR-069a4|A.3.2.1}}). *A {{true}} value indicates that the CPE will perform auto-creation of instances when the Alias-Based Addressing Mechanism is used in SetParameterValues RPC. *A {{false}} value indicates that the CPE will not create new object instances. Instead, it will reject the setting of parameters in unrecognized instances and respond with a fault code. This parameter is REQUIRED for any CPE supporting Alias-Based Addressing. Configures the first session retry wait interval, in seconds, as specified in {{bibref|TR-069a2|Section 3.2.1.1}}. A value of 5 corresponds to the default behavior that is described in {{bibref|TR-069a2}}. The device MUST use a random value between {{param}} and ({{param}} * {{param|CWMPRetryIntervalMultiplier}} / 1000) as the first retry wait interval. Other values in the retry pattern MUST be calculated using this value as a starting point. Configures the retry interval multiplier as specified in {{bibref|TR-069a2|Section 3.2.1.1}}. This value is expressed in units of 0.001. Hence the values of the multiplier range between 1.000 and 65.535. A value of 2000 corresponds to the default behavior that is described in {{bibref|TR-069a2}}. The device MUST use a random value between {{param|CWMPRetryMinimumWaitInterval}} and ({{param|CWMPRetryMinimumWaitInterval}} * {{param}} / 1000) as the first retry wait interval. Other values in the retry pattern MUST be calculated using this value as a starting point.