A string identifying the software version currently installed in the CPE.

To allow version comparisons, this element SHOULD be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 3.0.21where the components mean: Major.Minor.Build.

Identifier of the primary service provider and other provisioning information, which MAY be used by the Server to determine service provider-specific customization and provisioning parameters.

If not an empty string, this argument SHOULD be in the form of a hierarchical descriptor with one or more nodes specified. Each node in the hierarchy is represented as a 4-character sub-string, containing only numerals or upper-case letters. If there is more than one node indicated, each node is separated by a "." (dot). Examples: "TLCO" or "TLCO.GRP2".

URL for the CPE to connect to the ACS using the CPE WAN Management Protocol.

This parameter MUST be in the form of a valid HTTP or HTTPS URL [RFC2616].

The host portion of this URL is used by the CPE for server-side certificate authentication when using SSL or TLS.

ParameterKey provides the ACS a reliable and extensible means to track changes made by the ACS. The value of ParameterKey MUST be equal to the value of the ParameterKey argument from the most recent successful SetParameterValues, AddObject, or DeleteObject method call from the ACS.

The CPE MUST set ParameterKey to the value specified in the corresponding method arguments if and only if the method completes successfully and no fault response is generated. If a method call does not complete successfully (implying that the changes requested in the method did not take effect), the value of ParameterKey MUST NOT be modified.

The CPE MUST only modify the value of ParameterKey as a result of SetParameterValues, AddObject, DeleteObject, or due to a factory reset. On factory reset, the value of ParameterKey MUST be set to an empty string.

HTTP URL for an ACS to make a Connection Request notification to the CPE.

In the form:

http://host:port/path

The host portion of the URL MAY be the IP address for the management interface of the CPE in lieu of a host name.

Identifier of a set of classes or flows that have the corresponding ForwardingPolicy value as defined in the QueueManagement object.

A value of -1 indicates no ForwardingPolicy is specified.

If specified, this forwarding entry is to apply only to traffic associated with the specified classes and flows.

The status of this Bridge table entry. Enumeration of:

• Disabled
• Enabled
• Error

The 802.1Q VLAN ID associated with this Bridge.

A value of 0 indicates either Untagged or PriorityOnly tagging, which are treated identically.

The status of this Filter table entry. Enumeration of:

• Disabled
• Enabled
• Error

Whether or not the Filter definition is exclusive of all others. And if the entry is exclusive, order of precedence.

A value of 1 or greater indicates an Exclusive Filter, where the value 1 indicates the first entry to be considered (highest precedence).

A value of 0 indicates a Non-Exclusive Filter.

For each packet, if the packet matches any Exclusive Filters, the packet is assigned to the Bridge associated with the highest precedence Exclusive Filter to which it matches (lowest ExclusivityOrder value).

If and only if the packet does not match any Exclusive Filters, the packet is assigned to all Bridges associated with each Non-Exclusive Filter for which it matches the defining criteria.

If a packet matches no Filter, it is discarded.

When the ExclusivityOrder is set to match that of an existing Exclusive Filter (1 or greater), the value for the existing entry and all higher numbered entries is incremented (lowered in precedence) to ensure uniqueness of this value. A deletion or change in ExclusivityOrder of an Exclusive Filter causes ExclusivityOrder values of other Exclusive Filters (values 1 or greater) to be compacted.

Note that the use of Exclusive Filters to associate a layer-3 router interface with LAN and/or WAN interfaces via a Bridge entry overrides the default association between layer-3 and layer-2 objects implied by the InternetGatewayDevice object hierarchy.

The interface or interfaces associated with this Filter table entry. The bridge corresponding to this Filter table entry is defined to admit packets on ingress to the bridge from the specified interfaces that meet all of the criteria specified in the Filter table entry. The following values are defined.

To associate this Filter with a single interface listed in the AvailableInterface table, the FilterInterface value is set to the value of corresponding AvailableInterfaceKey.

• AllInterfaces indicates that this Filter is associated with all LAN and WAN interfaces listed in the AvailableInterface table (all entries of InterfaceType LANInterface or WANInterface).
• LANInterfaces indicates that this Filter is associated with all LAN interfaces listed in the AvailableInterface table (all entries of InterfaceType LANInterface).
• WANInterfaces indicates that this Filter is associated with all WAN interfaces listed in the AvailableInterface table (all entries of InterfaceType WANInterface).
• an empty string indicates the Filter table entry is not associated with any interface (and has no effect)

The 802.1Q VLAN ID of packets to admit to the specified Bridge through the interfaces specified for this Filter.

A value of -1 indicates that the default VLAN ID for the Bridge should be used instead (as specified by InternetGatewayDevice.Layer2Bridging.Bridge.{i}.VLANID for the Bridge table entry associated with this Filter table entry). On creation of a Filter entry, the default value for this parameter should be -1.

If true, on ingress to the interfaces associated with this Filter, the Bridge admits only packets tagged with a VLAN ID that matches the VLANIDFilter parameter (or instead, the VLAN ID for the Bridge if VLANIDFilter is unspecified).

If false, on ingress to the interfaces associated with this Filter, the Bridge admits both packets tagged with a VLAN ID that matches the VLANIDFilter parameter (or instead, the VLAN ID for the Bridge if VLANIDFilter is unspecified), and any Untagged or PriorityOnly packets. All Untagged or PriorityOnly packets are tagged on ingress with the value of the VLANID? parameter.

If the VLANIDFilter parameter (or instead, the VLAN ID for the Bridge if VLANIDFilter is unspecified) is equal to 0, then this parameter is ignored, and only packets that are Untagged or PriorityOnly packets are admitted.

If false, on ingress to the interfaces associated with this Filter, the Bridge is defined to admit only those packets that match one of the EthertypeFilterList entries (in either the Ethernet or SNAP Type header). If the EthertypeFilterList is empty, no packets are admitted.

If true, on ingress to the interfaces associated with this Filter, the Bridge is defined to admit all packets except those packets that match one of the EthertypeFilterList entries (in either the Ethernet or SNAP Type header). If the EthertypeFilterList is empty, packets are admitted regardless of Ethertype.

Comma-separated list (maximum number of characters 512) of strings. Comma-separated list of MAC Addresses.

Each list entry may optionally specify a bit-mask, where matching of a packet's MAC address is only to be done for bit positions set to one in the mask. If no mask is specified, all bits of the MAC Address are to be used for matching.

For example, the list may be: 01:02:03:04:05:06, 1:22:33:00:00:00/FF:FF:FF:00:00:00, 88:77:66:55:44:33

If false, on ingress to the interfaces associated with this Filter, the Bridge admits only those packets whose source MAC Address matches one of the SourceMACAddressFilterList entries. If the SourceMACAddressFilterList is empty, no packets are admitted.

If true, on ingress to the interfaces associated with this Filter, the Bridge admits all packets except those packets whose source MAC Address matches one of the SourceMACAddressFilterList entries. If the SourceMACAddressFilterList is empty, packets are admitted regardless of MAC address.

Comma-separated list (maximum number of characters 512) of strings. Comma-separated list of MAC Addresses.

Each list entry may optionally specify a bit-mask, where matching of a packet's MAC address is only to be done for bit positions set to one in the mask. If no mask is specified, all bits of the MAC Address are to be used for matching.

For example, the list may be: 01:02:03:04:05:06, 1:22:33:00:00:00/FF:FF:FF:00:00:00, 88:77:66:55:44:33

If false, on ingress to the interfaces associated with this Filter, the Bridge admits only those packets whose destination MAC Address matches one of the DestMACAddressFilterList entries. If the DestMACAddressFilterList is empty, no packets are admitted.

If true, on ingress to the interfaces associated with this Filter, the Bridge admits all packets except those packets whose destination MAC Address matches one of the DestMACAddressFilterList entries. If the DestMACAddressFilterList is empty, packets are admitted regardless of MAC address.

If false, on ingress to the interfaces associated with this Filter, the Bridge admits only those packets whose source MAC Address matches that of a LAN device previously identified as described in SourceMACFromVendorClassIDFilter. If SourceMACFromVendorClassIDFilter is an empty string, no packets are admitted.

If true, on ingress to the interfaces associated with this Filter, the Bridge admits all packets except those packets whose source MAC Address matches that of a LAN device previously identified as described in SourceMACFromVendorClassIDFilter. If the SourceMACFromVendorClassIDFilter is an empty string, packets are admitted regardless of MAC address.

If false, on ingress to the interfaces associated with this Filter, the Bridge admits only those packets whose destination MAC Address matches that of a LAN device previously identified as described in DestMACFromVendorClassIDFilter. If DestMACFromVendorClassIDFilter is an empty string, no packets are admitted.

If true, on ingress to the interfaces associated with this Filter, the Bridge admits all packets except those packets whose destination MAC Address matches that of a LAN device previously identified as described in DestMACFromVendorClassIDFilter. If the DestMACFromVendorClassIDFilter is an empty string, packets are admitted regardless of MAC address.

If false, on ingress to the interfaces associated with this Filter, the Bridge admits only those packets whose source MAC Address matches that of a LAN device previously identified as described in SourceMACFromClientIDFilter. If SourceMACFromClientIDFilter is an empty string, no packets are admitted.

If true, on ingress to the interfaces associated with this Filter, the Bridge admits all packets except those packets whose source MAC Address matches that of a LAN device previously identified as described in SourceMACFromClientIDFilter. If the SourceMACFromClientIDFilter is an empty string, packets are admitted regardless of MAC address.

If false, on ingress to the interfaces associated with this Filter, the Bridge admits only those packets whose destination MAC Address matches that of a LAN device previously identified as described in DestMACFromClientIDFilter. If DestMACFromClientIDFilter is an empty string, no packets are admitted.

If true, on ingress to the interfaces associated with this Filter, the Bridge admits all packets except those packets whose destination MAC Address matches that of a LAN device previously identified as described in DestMACFromClientIDFilter. If the DestMACFromClientIDFilter is an empty string, packets are admitted regardless of MAC address.

If false, on ingress to the interfaces associated with this Filter, the Bridge admits only those packets whose source MAC Address matches that of a LAN device previously identified as described in SourceMACFromUserClassIDFilter. If SourceMACFromUserClassIDFilter is an empty string, no packets are admitted.

If true, on ingress to the interfaces associated with this Filter, the Bridge admits all packets except those packets whose source MAC Address matches that of a LAN device previously identified as described in SourceMACFromUserClassIDFilter. If the SourceMACFromUserClassIDFilter is an empty string, packets are admitted regardless of MAC address.

If false, on ingress to the interfaces associated with this Filter, the Bridge admits only those packets whose destination MAC Address matches that of a LAN device previously identified as described in DestMACFromUserClassIDFilter. If DestMACFromUserClassIDFilter is an empty string, no packets are admitted.

If true, on ingress to the interfaces associated with this Filter, the Bridge admits all packets except those packets whose destination MAC Address matches that of a LAN device previously identified as described in DestMACFromUserClassIDFilter. If the DestMACFromUserClassIDFilter is an empty string, packets are admitted regardless of MAC address.

The status of this Marking table entry. Enumeration of:

• Disabled
• Enabled
• Error

The BridgeKey value of the Bridge table entry associated with this Marking table entry. A value of -1 indicates the Marking table entry is not associated with a Bridge (and has no effect).

The effect of a Marking table entry applies only to packets that have been admitted to the specified bridge (regardless of the ingress interface).

The interface or interfaces associated with this Marking table entry for which the specified marking behavior is to apply on egress from the associated bridge. The following values are defined.

To associate this Marking table entry with a single interface listed in the AvailableInterface table, the MarkingInterface value is set to the value of corresponding AvailableInterfaceKey.

• AllInterfaces indicates that this Marking table entry is associated with all LAN and WAN interfaces listed in the AvailableInterface table (all entries of InterfaceType LANInterface or WANInterface).
• LANInterfaces indicates that this Marking table entry is associated with all LAN interfaces listed in the AvailableInterface table (all entries of InterfaceType LANInterface).
• WANInterfaces indicates that this Marking table entry is associated with all WAN interfaces listed in the AvailableInterface table (all entries of InterfaceType WANInterface).
• an empty string indicates the Marking table entry table entry is not associated with any interface (and has no effect)

If there is more than one enabled Marking table entry that specifies one or more of the same interfaces for the same bridge (identical values of MarkingBridgeReference), then for packets on egress from the specified bridge to those interfaces, the applied marking MUST be that specified in the Marking table entry among those in conflict with the lowest MarkingKey value.

If an interface in a given bridge does not have a corresponding Marking table entry, the marking is left unchanged on egress.

If true, on egress to the interfaces associated with this Marking table entry, all packets are Untagged. That is, the VLAN tag is stripped from the packet.

If false, on egress to the interfaces associated with this Marking table entry, all VLAN tags are left intact (including those added on ingress).

The 802.1Q VLAN ID to be used on egress to the interfaces associated with this Marking table entry (if VLANIDUntag is false).

A value of -1 indicates that the default VLAN ID for the Bridge should be used instead (as specified by InternetGatewayDevice.Layer2Bridging.Bridge.{i}.VLANID for the Bridge table entry associated with this Marking table entry).

If false, on egress to the interfaces associated with this Marking table entry, the EthernetPriorityMark, if specified, is applied only to packets of priority 0.

If true, on egress to the interfaces associated with this Marking table entry, the EthernetPriorityMark, if specified, is to be applied to all packets on this Bridge.

If VLANIDUntag is true, then no priority marking is done since the tag containing the Ethernet priority is removed.

Whether the interface is a LAN-side or WAN-side interface, or a LAN-side or WAN-side connection to the Gateway's IP router. Enumeration of:

• LANInterface
• WANInterface
• LANRouterConnection
• WANRouterConnection

This table should contain a single entry for each available LAN and WAN interface.

For a WAN interface, this parameter is the full hierarchical parameter name of a particular WANConnectionDevice. A WANConnectionDevice is considered available (included in this table) only if it supports layer-2 bridged traffic. That is, this table MUST include only WANConnectionDevices that contain either a WANEthernetLinkConfig object, or that contain a WANDSLLinkConfig object for which the LinkType is EoA. For example: InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2

For a LAN interface, this parameter is the full hierarchical parameter name of a particular LAN**InterfaceConfig object, or a WLANConfiguration object. This table SHOULD include one entry for each such object. For example: InternetGatewayDevice.LANDevice.1.LANLANEthernetInterfaceConfig.2

For a WAN-side connection to the Gateway's IP router, this parameter is the full hierarchical parameter name of a particular WAN**Connection service. This table SHOULD include an entry for each layer-3 WAN connection. For example: InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.WANPPPConnection.1

For a LAN-side connection to the Gateway's IP router, this parameter is the full hierarchical parameter name of a particular LANDevice. This table SHOULD include an entry for each LANDevice, each of which is associated with a LAN-side layer-3 connection to the Gateway's IP router. For example: InternetGatewayDevice.LANDevice.2

Instance number of the Policer table entry for traffic not associated with any specified classifier.

A value of -1 indicates a null policer.

DSCP to mark traffic not associated with any specified classifier.

A value of -1 indicates no change from the incoming packet.

A value of -2 indicates automatic marking of DSCP based upon the EthernetPriority value as defined in [Appendix A/TR-098].

Ethernet priority code (as defined in 802.1D) to mark traffic not associated with any specified classifier.

A value of -1 indicates no change from the incoming packet.

A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value as defined in [Appendix A/TR-098].

The status of this classifier. Enumeration of:

• Disabled
• Enabled
• Error

Position of the classification entry in the order of precedence. A value of 1 indicates the first entry considered. For each packet, the highest ordered entry that matches the classification criteria is applied. All lower order entries are ignored.

When this value is modified, if the value matches that of an existing entry, the Order value for the existing entry and all lower Order entries is incremented (lowered in precedence) to ensure uniqueness of this value. A deletion causes Order values to be compacted. When a value is changed, incrementing occurs before compaction.

Classification criterion.

Specifies the LAN or WAN ingress interface associated with this entry. The content is the full hierarchical parameter name of the particular WANDevice, WANConnectionDevice, WAN**Connection, LANDevice, or LAN**InterfaceConfig object.

The following are WAN interface examples:

• InternetGatewayDevice.WANDevice.2
• InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.WANPPPConnection.1

The following are LAN interface examples:

• InternetGatewayDevice.LANDevice.3
• InternetGatewayDevice.LANDevice.1.LANLANEthernetInterfaceConfig.2

The string WAN indicates this entry is to apply to traffic entering from any WAN interface.

The string LAN indicates this entry is to apply to traffic entering from any LAN interface.

The string Local indicates this entry is to apply to IP-layer traffic entering from a local source within the Internet Gateway Device.

An empty string indicates this classification entry is to apply to all sources.

[IPAddress] Classification criterion.

Destination IP address. An empty string indicates this criterion is not used for classification.

If false, the class includes only those packets that match the (masked) DestIP entry, if specified.

If true, the class includes all packets except those that match the (masked) DestIP entry, if specified.

[IPAddress] Classification criterion.

Source IP address. An empty string indicates this criterion is not used for classification.

If false, the class includes only those packets that match the (masked) SourceIP entry, if specified.

If true, the class includes all packets except those that match the (masked) SourceIP entry, if specified.

Classification criterion.

Protocol number. A value of -1 indicates this criterion is not used for classification.

If false, the class includes only those packets that match the Protocol entry, if specified.

If true, the class includes all packets except those that match the Protocol entry, if specified.

Classification criterion.

Destination port number. A value of -1 indicates this criterion is not used for classification.

Classification criterion.

If specified, indicates the classification criterion is to include the port range from DestPort through DestPortRangeMax (inclusive). If specified, DestPortRangeMax MUST be greater than or equal to DestPort.

A value of -1 indicates that no port range is specified.

If false, the class includes only those packets that match the DestPort entry (or port range), if specified.

If true, the class includes all packets except those that match the DestPort entry (or port range), if specified.

Classification criterion.

Source port number. A value of -1 indicates this criterion is not used for classification.

Classification criterion.

If specified, indicates the classification criterion is to include the port range from SourcePort through SourcePortRangeMax (inclusive). If specified, SourcePortRangeMax MUST be greater than or equal to SourcePort.

A value of -1 indicates that no port range is specified.

If false, the class includes only those packets that match the SourcePort entry (or port range), if specified.

If true, the class includes all packets except those that match the SourcePort entry (or port range), if specified.

[MACAddress] Classification criterion.

Source MAC Address. An empty string indicates this criterion is not used for classification.

If false, the class includes only those packets that match the (masked) SourceMACAddress entry, if specified.

If true, the class includes all packets except those that match the (masked) SourceMACAddress entry, if specified.

[MACAddress] Classification criterion.

Destination MAC Address. An empty string indicates this criterion is not used for classification.

The use of destination MAC address as a classification criterion is primarily useful only for bridged traffic.

If false, the class includes only those packets that match the (masked) DestMACAddress entry, if specified.

If true, the class includes all packets except those that match the (masked) DestMACAddress entry, if specified.

Classification criterion.

Ethertype as indicated in either the Ethernet or SNAP Type header. A value of -1 indicates this criterion is not used for classification.

If false, the class includes only those packets that match the Ethertype entry, if specified.

If true, the class includes all packets except those that match the Ethertype entry, if specified.

Classification criterion.

SSAP element in the LLC header. A value of -1 indicates this criterion is not used for classification.

If false, the class includes only those packets that match the SSAP entry, if specified.

If true, the class includes all packets except those that match the SSAP entry, if specified.

Classification criterion.

DSAP element in the LLC header. A value of -1 indicates this criterion is not used for classification.

If false, the class includes only those packets that match the DSAP entry, if specified.

If true, the class includes all packets except those that match the DSAP entry, if specified.

Classification criterion.

Control element in the LLC header. A value of -1 indicates this criterion is not used for classification.

If false, the class includes only those packets that match the LLCControl entry, if specified.

If true, the class includes all packets except those that match the LLCControl entry, if specified.

Classification criterion.

OUI element in the SNAP header. A value of -1 indicates this criterion is not used for classification.

If false, the class includes only those packets that match the SNAPOUI entry, if specified.

If true, the class includes all packets except those that match the SNAPOUI entry, if specified.

Classification criterion.

Used to identify one or more LAN devices, value of the DHCP Vendor Class Identifier (Option 60) as defined in RFC 2132.

An empty string indicates this criterion is not used for classification.

If false, the class includes only those packets sourced from LAN devices that match the SourceVendorClassID entry, if specified.

If true, the class includes all packets except those sourced from LAN devices that match the SourceVendorClassID entry, if specified.

Classification criterion.

Used to identify one or more LAN devices, value of the DHCP Vendor Class Identifier (Option 60) as defined in RFC 2132.

An empty string indicates this criterion is not used for classification.

If false, the class includes only those packets destined for LAN devices that match the DestVendorClassID entry, if specified.

If true, the class includes all packets except those destined for LAN devices that match the DestVendorClassID entry, if specified.

Classification criterion.

Used to identify one or more LAN devices, value of the DHCP Client Identifier (Option 61) as defined in RFC 2132.

An empty string indicates this criterion is not used for classification.

If false, the class includes only those packets sourced from LAN devices that match the SourceClientID entry, if specified.

If true, the class includes all packets except those sourced from LAN devices that match the SourceClientID entry, if specified.

Classification criterion.

Used to identify one or more LAN devices, value of the DHCP Client Identifier (Option 61) as defined in RFC 2132.

An empty string indicates this criterion is not used for classification.

If false, the class includes only those packets destined for LAN devices that match the DestClientID entry, if specified.

If true, the class includes all packets except those destined for LAN devices that match the DestClientID entry, if specified.

Classification criterion.

Used to identify one or more LAN devices, value of the DHCP User Class Identifier (Option 77) as defined in RFC 3004.

An empty string indicates this criterion is not used for classification.

If false, the class includes only those packets sourced from LAN devices that match the SourceUserClassID entry, if specified.

If true, the class includes all packets except those sourced from LAN devices that match the SourceUserClassID entry, if specified.

Classification criterion.

Used to identify one or more LAN devices, value of the DHCP User Class Identifier (Option 77) as defined in RFC 3004.

An empty string indicates this criterion is not used for classification.

If false, the class includes only those packets destined for LAN devices that match the DestUserClassID entry, if specified.

If true, the class includes all packets except those destined for LAN devices that match the DestUserClassID entry, if specified.

Classification criterion.

If false, this criterion is not used for classification.

If true, this criterion matches with all TCP segments that have the ACK control bit set.

If false, the class includes only those packets that match the TCPACK entry, if specified.

If true, the class includes all packets except those that match the TCPACK entry, if specified.

Classification criterion.

Minimum IP Packet Length (including header) in bytes.

Classification criterion.

Maximum IP Packet Length (including header) in bytes.

A value of zero indicates that no maximum is specified (an umlimited maximum length).

If false, the class includes only those packets whose length (including header) falls within the inclusive range IPLengthMin through IPLengthMax. A value of zero for both IPLengthMin and IPLengthMax allows any length packet. An equal non-zero value of IPLengthMin and IPLengthMax allows only a packet with the exact length specified.

If true, the class includes all packets except those whose length (including header) falls within the inclusive range IPLengthMin through IPLengthMax.

Classification criterion.

DiffServ codepoint (defined in RFC 2474).

If set to a Class Selector Codepoint (defined in RFC 2474), all DSCP values that match the first 3 bits will be considered a valid match.

A value of -1 indicates this criterion is not used for classification.

If false, the class includes only those packets that match the DSCPCheck entry, if specified.

If true, the class includes all packets except those that match the DSCPCheck entry, if specified.

Classification result.

DSCP to mark traffic with that falls into this classification entry.

A value of -1 indicates no change from the incoming packet.

A value of -2 indicates automatic marking of DSCP based upon the EthernetPriority value as defined in [Appendix A/TR-098].

Classification criterion.

Current Ethernet priority as defined in 802.1D. A value of -1 indicates this criterion is not used for classification.

If false, the class includes only those packets that match the EthernetPriorityCheck entry, if specified.

If true, the class includes all packets except those that match the EthernetPriorityCheck entry, if specified.

Classification result.

Ethernet priority code (as defined in 802.1D) to mark traffic with that falls into this classification entry.

A value of -1 indicates no change from the incoming packet.

A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value as defined in [Appendix A/TR-098].

Classification criterion.

Current Ethernet VLAN ID as defined in 802.1Q. A value of -1 indicates this criterion is not used for classification.

If false, the class includes only those packets that match the VLANIDCheck entry, if specified.

If true, the class includes all packets except those that match the VLANIDCheck entry, if specified.

Classification result.

Identifier of the forwarding policy associated with traffic that falls in this classification.

Classification result.

Instance number of the Policer table entry for traffic that falls in this classification.

A value of -1 indicates a null policer.

Classification result.

Instance number of the Queue table entry for traffic that falls in this classification.

A value of -1 indicates a null queue.

ClassQueue and ClassApp are mutually exclusive and one of the two must be specified. If ClassQueue is null, ClassApp must be specified, and vice versa.

Classification result.

Instance number of the App table entry for traffic that falls in this classification.

A value of -1 indicates a null App table entry.

ClassQueue and ClassApp are mutually exclusive and one of the two must be specified. If ClassQueue is null, ClassApp must be specified, and vice versa.

The status of this App table entry. Enumeration of:

• Disabled
• Enabled
• Error

Instance number of the Policer table entry for traffic associated with this App table entry, but not associated with any specified flow.

A value of -1 indicates a null policer.

Instance number of the Queue table entry for traffic associated with this App table entry, but not associated with any specified flow.

A value of -1 indicates a null queue.

DSCP to mark traffic associated with this App table entry, but not associated with any specified flow.

A value of -1 indicates no change from the incoming packet.

A value of -2 indicates automatic marking of DSCP based upon the EthernetPriority value as defined in [Appendix A/TR-098].

Ethernet priority code (as defined in 802.1D) to mark traffic associated with this App table entry, but not associated with any specified flow.

A value of -1 indicates no change from the incoming packet.

A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value as defined in [Appendix A/TR-098].

The status of this Flow table entry. Enumeration of:

• Disabled
• Enabled
• Error

Instance number of the Policer table entry for traffic that falls in this flow.

A value of -1 indicates a null policer.

Instance number of the Queue table entry for traffic that falls in this flow.

A value of -1 indicates a null queue.

DSCP to mark traffic with that falls into this flow.

A value of -1 indicates no change from the incoming packet.

A value of -2 indicates automatic marking of DSCP based upon the EthernetPriority value as defined in [Appendix A/TR-098].

Ethernet priority code (as defined in 802.1D) to mark traffic with that falls into this flow.

A value of -1 indicates no change from the incoming packet.

A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value as defined in [Appendix A/TR-098].

The status of this policer. Enumeration of:

• Disabled
• Enabled
• Error

Excess Burstsize in bytes.

Applied for a SingleRateThreeColor meter.

Peak rate allowed for this Meter in bits-per-second.

Applied for TwoRateThreeColor meters.

Peak Burstsize in bytes.

Applied for TwoRateThreeColor meters.

Identifies the method of traffic measurement to be used for this policer. Enumeration of:

• SimpleTokenBucket
• SingleRateThreeColor
• TwoRateThreeColor

SimpleTokenBucket makes use of CommittedRate and CommittedBurstSize.

SingleRateThreeColor makes use of CommittedRate, CommittedBurstSize, and ExcessBurstSize as defined in RFC 2697.

TwoRateThreeColor makes use of CommittedRate, CommittedBurstSize, PeakRate, and PeakBurstSize as defined in RFC 2698.

Comma-separated list of strings. Supported meter types. Each list item is an enumeration of:

• SimpleTokenBucket
• SingleRateThreeColor
• TwoRateThreeColor

Instructions for how to handle traffic that is conforming. Possible patterns:

• Null
• Drop
• Count
• [0-9]|[1-5][0-9]|6[0-3] (<DSCP Value>)

Null corresponds with no action.

A Count action increases the meter instance count statistics.

<DSCP Value> is an unsigned integer that corresponds with a mark action overwriting the traffic's DSCP with the configured DSCP.

Instructions for how to handle traffic that is partially conforming (colored yellow). Possible patterns:

• Null
• Drop
• Count
• [0-9]|[1-5][0-9]|6[0-3] (<DSCP Value>)

Null corresponds with no action.

A Count action increases the meter instance count statistics.

<DSCP Value> is an unsigned integer that corresponds with a mark action overwriting the traffic's DSCP with the configured DSCP.Only applies for three-color meters.

Instructions for how to handle traffic that is non-conforming. Possible patterns:

• Null
• Drop
• Count
• [0-9]|[1-5][0-9]|6[0-3] (<DSCP Value>)

Null corresponds with no action.

A Count action increases the meter instance count statistics.

<DSCP Value> is an unsigned integer that corresponds with a mark action overwriting the traffic's DSCP with the configured DSCP.

The status of this queue. Enumeration of:

• Disabled
• Enabled
• Error

Egress interfaces for which the specified queue must exist. This parameter must be in one of the following forms:

• The full hierarchical parameter name of the particular WANDevice, WANConnectionDevice, WAN**Connection, LANDevice, or LAN**InterfaceConfig object.
• The string WAN, which indicates this entry applies to all WAN interfaces.
• The string LAN, which indicates this entry applies to all LAN interfaces.
• an empty string, which indicates this classification entry is to apply to all interfaces.

Packets classified into this queue that exit through any other interface must instead use the default queuing behavior specified in the Queue table entry referenced by InternetGatewayDevice.QueueManagement.DefaultQueue.

For the default queue itself (the Queue table entry referenced by InternetGatewayDevice.QueueManagement.DefaultQueue), the value of the QueueInterface parameter MUST be ignored. That is, the default queue must exist on all egress interfaces.

Dropping algorithm used for this queue if congested. Enumeration of:

• RED
• DT
• WRED
• BLUE

Scheduling Algorithm used by scheduler. Enumeration of:

• WFQ
• WRR
• SP (strict priority)

Rate to shape this queue's traffic.

If <= 100, in percent of the rate of the highest rate-constrained layer over which the packet will travel on egress. The rate is limited over the window period specified by ShapeWindow?.

If > 100, in bits per second.

A value of -1 indicates no shaping.

Indicates availability of diagnostic data. Enumeration of:

• None (READONLY)
• Requested
• Complete (READONLY)
• Error_CannotResolveHostName (READONLY)

Value may be set to Requested to initiate the diagnostic test. When writing, the only allowed value is Requested. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set either prior to or at the same time as (in the same SetParameterValues) setting the DiagnosticsState to Requested.

When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic.

When the diagnostic initiated by the ACS is completed (successfully or not), the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message.

Comma-separated list (maximum number of characters 1024) of strings. Channels that the access point determines to be currently in use (including any that it is using itself).

Ranges in the form "n-m" are permitted.

Number of seconds since the beginning of the period used for collection of Total statistics.

Statistics SHOULD continue to be accumulated across CPE reboots, though this may not always be possible.

Number of seconds since the second most recent DSL Showtime-the beginning of the period used for collection of LastShowtime statistics.

If the CPE has not retained information about the second most recent Showtime (e.g., on reboot), the start of LastShowtime statistics MAY temporarily coincide with the start of Showtime statistics.

Number of seconds since the beginning of the period used for collection of CurrentDay statistics.

The CPE MAY align the beginning of each CurrentDay interval with days in the UTC time zone, but is not required to do so.

Statistics SHOULD continue to be accumulated across CPE reboots, though this may not always be possible.

Number of seconds since the beginning of the period used for collection of QuarterHour statistics.

The CPE MAY align the beginning of each QuarterHour interval with real-time quarter-hour intervals, but is not required to do so.

Statistics SHOULD continue to be accumulated across CPE reboots, though this may not always be possible.

Indicates availability of diagnostic data. Enumeration of:

• None (READONLY)
• Requested
• Complete (READONLY)

Value may be set to Requested to initiate the diagnostic test, which brings down the DSL connection while the test is operating. When writing, the only allowed value is Requested.

When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic.

When the diagnostic initiated by the ACS is completed, the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the corresponding reason in the Inform message.

Indicates availability of diagnostic data. Enumeration of:

• None (READONLY)
• Requested
• Complete (READONLY)

Value may be set to Requested to initiate the diagnostic test. When writing, the only allowed value is Requested. To ensure the use of the proper test parameters (the writable parameters in this object), the test parameters MUST be set either prior to or at the same time as (in the same SetParameterValues) setting the DiagnosticsState to Requested.

When requested, the CPE SHOULD wait until after completion of the communication session with the ACS before starting the diagnostic.

When the diagnostic initiated by the ACS is completed (successfully or not), the CPE MUST establish a new connection to the ACS to allow the ACS to view the results, indicating the Event code 8 DIAGNOSTICS COMPLETE in the Inform message.

Rate to shape this connection's egress traffic to.

If <= 100, in percent of the rate of the highest rate-constrained layer over which the packet will travel on egress. The rate is limited over the window period specified by ShapeWindow?.

If > 100, in bits per second.

A value of -1 indicates no shaping.

Rate to shape this connection's egress traffic.

If <= 100, in percent of the rate of the highest rate-constrained layer over which the packet will travel on egress. The rate is limited over the window period specified by ShapeWindow?.

If > 100, in bits per second.

A value of -1 indicates no shaping.